char/pcmcia/synclink_cs.: make some functions static (fwd)
PATCH 1/1 char/pcmcia/synclink_cs.: make some functions static (fwd)
The patch forwarded below still applies and compiles against 2.6.10-rc3-mm1.
Please apply.
----- Forwarded message from Adrian Bunk <[email protected]> -----
Date: Sun, 5 Dec 2004 18:10:47 +0100
From: Adrian Bunk <[email protected]>
To: [email protected]
Subject: [2.6 patch] char/pcmcia/synclink_cs.: make some functions static
[ first mail included the wrong patch ]
The patch below makes some needlessly global functions static.
diffstat output:
drivers/char/pcmcia/synclink_cs.c | 24 ++++++++++++------------ 1 files changed, 12 insertions(+), 12 deletions(-)
drivers/char/pcmcia/synclink_cs.c renamed from drivers/char/pcmcia/synclink_cs.c.old +12 -12
@@ -923,7 +923,7 @@/* Return next bottom half action to perform. * or 0 if nothing to do. */ -int bh_action (MGSLPC_INFO *info) +static int bh_action (MGSLPC_INFO *info) {unsigned long flags;int rc =0 ;
@@ -1017,7 +1017,7 @@ }/* eom: non-zero = end of frame */ -void rx_ready_hdlc (MGSLPC_INFO *info,int eom) +static void rx_ready_hdlc (MGSLPC_INFO *info,int eom) {unsigned char data[2 ];unsigned char fifo_count, read_count, i;
@@ -1079,7 +1079,7 @@issue_command (info,CHA ,CMD_RXFIFO ); } -void rx_ready_async (MGSLPC_INFO *info,int tcd) +static void rx_ready_async (MGSLPC_INFO *info,int tcd) {unsigned char data, status;int fifo_count;
@@ -1153,7 +1153,7 @@ } -void tx_done (MGSLPC_INFO *info) +static void tx_done (MGSLPC_INFO *info) {if (!info->tx_active)return ;
@@ -1190,7 +1190,7 @@ } } -void tx_ready (MGSLPC_INFO *info) +static void tx_ready (MGSLPC_INFO *info) {unsigned char fifo_count =32 ;int c;
@@ -1239,7 +1239,7 @@ } } -void cts_change (MGSLPC_INFO *info) +static void cts_change (MGSLPC_INFO *info) {get_signals (info);if ((info->cts_chkcount)++ >=IO_PIN_SHUTDOWN_LIMIT )
@@ -1276,7 +1276,7 @@ info->pending_bh |=BH_STATUS ; } -void dcd_change (MGSLPC_INFO *info) +static void dcd_change (MGSLPC_INFO *info) {get_signals (info);if ((info->dcd_chkcount)++ >=IO_PIN_SHUTDOWN_LIMIT )
@@ -1310,7 +1310,7 @@ info->pending_bh |=BH_STATUS ; } -void dsr_change (MGSLPC_INFO *info) +static void dsr_change (MGSLPC_INFO *info) {get_signals (info);if ((info->dsr_chkcount)++ >=IO_PIN_SHUTDOWN_LIMIT )
@@ -1325,7 +1325,7 @@ info->pending_bh |=BH_STATUS ; } -void ri_change (MGSLPC_INFO *info) +static void ri_change (MGSLPC_INFO *info) {get_signals (info);if ((info->ri_chkcount)++ >=IO_PIN_SHUTDOWN_LIMIT )
@@ -2955,7 +2955,7 @@/* Called to print information about devices */ -int mgslpc_read_proc (char *page,char **start,off_t off,int count, +static int mgslpc_read_proc (char *page,char **start,off_t off,int count,int *eof,void *data) {int len =0 , l;
@@ -3212,7 +3212,7 @@module_init (synclink_cs_init);module_exit (synclink_cs_exit); -void mgslpc_set_rate (MGSLPC_INFO *info,unsigned char channel,unsigned int rate) +static void mgslpc_set_rate (MGSLPC_INFO *info,unsigned char channel,unsigned int rate) {unsigned int M ,N ;unsigned char val;
@@ -3248,7 +3248,7 @@/* Enabled the AUX clock output at the specified frequency. */ -void enable_auxclk (MGSLPC_INFO *info) +static void enable_auxclk (MGSLPC_INFO *info) {unsigned char val;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
----- End forwarded message -----