Skip to contentSkip to conversation

Radeonfb driver ignores video= when panel detected

DISCUSSION Erich Schubert 2 participants 2 messages Dec 23, 2004

lore
Share & tools
lore
#0 lore raw

Hi,
both radeon drivers will ignore the command line options "video=" when they detect a TFT panel. They will always use 8 bit color depth then.

I have a Thinkpad A31p with Radeon Mobility graphics. Since I'd like to try out bootsplash/gensplash I'd like to run 16 bit color depth. I needed to change this in the kernel
(in drivers/video/radeonfb.c: radeon_update_default_var(), drivers/video/aty/radeon_monitor.c: struct ... radeonfb_default_var) because the video= command line option that works fine on other boxes with radeons I have doesn't work.

Did I miss some other option?

Greetings,
Erich Schubert

Signature · 4 lines
   erich@(vitavonni.de|debian.org)    --    GPG Key ID: 4B3A135C    (o_
    Go away or i'll replace you with a very small shell script.     //\
           Es ist besser, geliebt und verloren zu haben,            V_/_
                   als niemals geliebt zu haben.
#1 lore raw
Quoted 12 lines · Erich Schubert

Hi,
both radeon drivers will ignore the command line options "video=" when they detect a TFT panel. They will always use 8 bit color depth then.

I have a Thinkpad A31p with Radeon Mobility graphics. Since I'd like to try out bootsplash/gensplash I'd like to run 16 bit color depth. I needed to change this in the kernel
(in drivers/video/radeonfb.c: radeon_update_default_var(), drivers/video/aty/radeon_monitor.c: struct ... radeonfb_default_var) because the video= command line option that works fine on other boxes with radeons I have doesn't work.

Quoted 1 line

Did I miss some other option?

No, you didn't, it's a problem that I'll fix after 2.6.10

Ben.