Intel 810(E) driver in Kernel 2.6.10 - same problem as in 2.6.9
Intel 810(E) driver in Kernel 2.6.10 - same problem as in 2.6.9
Fedora Core2; xorg 6.8.1 (and 6.7.x); kernel 2.6.9/2.6.10
(other problem in earlier 2.6.x?) Intel i810(E) driver
As reported for kernel 2.6.9, since rc1 the intel810(E) support seems to be broken and the driver does not even work half way, as it did in kernel 2.6.7.
As in 2.6.9, the screen (xorg, 6.8.1; intel 810(E)) comes up with junk (unable to access the memory?). I did not try disabling (2D) acceleration this time (as was suggested to a user of Fedora Core3 by the Fedora team as as reported in one of the usenet groups) since that is much too slow and, as I recall, did not fix the (apparent) memory leak (which also occurs in 2.6.7).
[memory leak in older 2.6.x kernels]
--
In 2.6.7 it seems memory is not freed either. Gimp-Gap (Gimp 2.0.x or 2.2.x). Use move-path and move something over an image. OK ... one animation ... do it again (moving another item over the image). And again and again ... It appears that others have no problem(?) with, in kernel 2.6.?, xorg 6.8.1 and 6.7.x, the memory used by move-path being freed. With the intel 810(E) driver (used by so few, admittedly), it is never freed (using "free" to see it use up system, buffer and then swap memory). It is not even freed when Gimp is closed down. One has to close X itself to get the 810(E) driver to free the memory (unless it is a bug in xorg 6.7.x and 6.8.1). Is this similar to the kernel 2.6.8[.1] bug where the kernel would not free certain memory under certain conditions (most notably breaking audio CD burning)? Is there a similar bug in the earlier 2.6.x intel810(E) drivers?
So, I am back to kernel 2.6.7 (Fedora Core2) for some things, rebooting to RH7.2 with a 2.4.x kernel when I want to get some work done in Gimp.
Quoted 5 lines · John McGowan
Intel 810(E) driver in Kernel 2.6.10 - same problem as in 2.6.9
Fedora Core2; xorg 6.8.1 (and 6.7.x); kernel 2.6.9/2.6.10
(other problem in earlier 2.6.x?) Intel i810(E) driver
In my case at least updating the X server packages fixed it.
Quoted 9 lines · Alan Cox
Quoted 5 lines · John McGowan
Intel 810(E) driver in Kernel 2.6.10 - same problem as in 2.6.9
Fedora Core2; xorg 6.8.1 (and 6.7.x); kernel 2.6.9/2.6.10
(other problem in earlier 2.6.x?) Intel i810(E) driverIn my case at least updating the X server packages fixed it.
To which version? 6.8.1 (rpm build from Fedora Core xorg-6.8.1-12.src.rpm). I see that 6.8.1 is the latest at xorg.
Fixed the memory or getting X to run at all on an 810?
Regards from:
John McGowan | [email protected] [Internet Channel] | [email protected] [COIN] --------------+-----------------------------------------------------
Quoted 2 lines · John McGowan
To which version? 6.8.1 (rpm build from Fedora Core xorg-6.8.1-12.src.rpm). I see that 6.8.1 is the latest at xorg.
Right but there are patches in CVS beyond that and some are merged into the FC testing/rawhide packages
Quoted 1 line
Fixed the memory or getting X to run at all on an 810?
I have 2D running nicely but not 3D
Quoted 10 lines · Alan Cox
Quoted 2 lines · John McGowan
To which version? 6.8.1 (rpm build from Fedora Core xorg-6.8.1-12.src.rpm). I see that 6.8.1 is the latest at xorg.
Right but there are patches in CVS beyond that and some are merged into the FC testing/rawhide packages
Quoted 1 line
Fixed the memory or getting X to run at all on an 810?
I have 2D running nicely but not 3D
The fedora core 3 development branch has a source rpm which I built in core 2. I am now using kernel 2.6.10 (still problems with gimp-gap chewing up memory which isn't freed). Thanks for your time. Now I will have to see if there is something newer at xorg.