CD-RW-Drive
Season Greetings,
Slackware 10, Kernel 2.4.26
I got myself an Asus Atapi CD-RW-Drive and I am not sure if this was the right choice for Linux. I was able to make it work following the instruction of the program xcdroast, however, some things seem strange.
I always get error messages telling not to use atapi instead scsi.
I had a CD with picture files on. When I copied them to the HD I can't open them and copying back to the CD I can't open them as well any longer. In fact I can not mount the CD anymore. Only xcdroast can.
$ mount /mnt/cdrom mount: Not a directory
Trying too boot Knoppix 3.4 from the CD I get only a blank screen. Booting from CD and then switching to HD, Knoppix works alright.
It seems that xcdroast can only write .wav and .iso files?????
Questions:
Is there a better CD-RW-Drive for Linux than Asus? The shop is willing to exxchange.
Are there better programs than xcdroast to R+W and which?
Thanks & regards
Signature · 7 lines
Peter - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 9 lines · Peter H.
Season Greetings,
Slackware 10, Kernel 2.4.26
I got myself an Asus Atapi CD-RW-Drive and I am not sure if this was the right choice for Linux. I was able to make it work following the instruction of the program xcdroast, however, some things seem strange.
I always get error messages telling not to use atapi instead scsi.
With 2.4.x kernels scsi is correct, add the following to /etc/lilo.conf and rerun lilo.
append "/dev/hdc=ide-scsi"
( thats of my head, possably someone else may need to verify the syntax). (( where /dev/hdc is your device)).
Quoted 10 lines
I had a CD with picture files on. When I copied them to the HD I can't open them and copying back to the CD I can't open them as well any longer. In fact I can not mount the CD anymore. Only xcdroast can.
$ mount /mnt/cdrom mount: Not a directoryTrying too boot Knoppix 3.4 from the CD I get only a blank screen. Booting from CD and then switching to HD, Knoppix works alright.
It seems that xcdroast can only write .wav and .iso files?????
No xcdraost does most all formats.
Quoted 4 lines
Questions:
Is there a better CD-RW-Drive for Linux than Asus? The shop is willing to exxchange.
Nothing wrong with mine works like a charm.
Quoted 2 lines
Are there better programs than xcdroast to R+W and which?
There is k3b but i prefer xcdroast...
Quoted 2 lines
Thanks & regards
Signature · 13 lines
If the Linux community is a bunch of thieves because they try to imitate windows programs, then the Windows community is built on organized crime. Regards Richard [email protected] http://people.zeelandnet.nl/pa3gcu/ - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Just a quick follow-up to correct a typo:
the command to run after editing /etc/lilo.conf is
/sbin/lilo -v
(I believe I ran two words together, which might have been confusing)
Also as to placement of the append line; it goes in the stanza that looks something like this one:
image=/vmlinuz
label=Linux
initrd=/boot/initrd.gz
read-only
append="hdc=ide-scsi hdd=ide-scsi"
you may or may not have the initrd line, depending on your kernel. Don't change anything except the append line. And then after saving, run lilo as above. (this bears repeating as it is easy to forget!) I have two CD drives, hdc and hdd. You may have only one, in which case the two entries are unnecessary, although they won't harm anything.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 11 lines · On Wed, 29 Dec 2004 15:06:43 +0800 "Peter H." <[email protected]> wrote:
Season Greetings,
Slackware 10, Kernel 2.4.26
I got myself an Asus Atapi CD-RW-Drive and I am not sure if this was the right
choice for Linux. I was able to make it work following the instruction of the
program xcdroast, however, some things seem strange.I always get error messages telling not to use atapi instead scsi.
Since you are using a 2.4.26 kernel, you might want to try ide-scsi emulation. It is deprecated for 2.6.* kernels but should be fine with yours. If your boot loader is lilo, you can put
append="hda=scsi hdb=scsi hdc=scsi"
or whatever devices you need scsi emulation for. I have no experience with grub, but someone will know on this list, I'm sure. (The append line goes in /etc/lilo.conf - which you will of course need to edit as root in your editor of choice. After editing it be sure to run/sbin/lilo-v before rebooting! Otherwise your changes won't take effect... ) The -v for running lilo is "verbose", which might be useful if you make an error.
Quoted 8 lines
I had a CD with picture files on. When I copied them to the HD I can't open
them and copying back to the CD I can't open them as well any longer. In fact
I can not mount the CD anymore. Only xcdroast can.$ mount /mnt/cdrom mount: Not a directory
This is a mystery to me, sorry - maybe someone else has a suggestion.
Quoted 7 lines
Trying too boot Knoppix 3.4 from the CD I get only a blank screen. Booting
from CD and then switching to HD, Knoppix works alright.It seems that xcdroast can only write .wav and .iso files?????
Quoted 7 lines
Questions:
Is there a better CD-RW-Drive for Linux than Asus? The shop is willing to
exxchange.Are there better programs than xcdroast to R+W and which?
For sheer ease of use I doubt that anything beats k3b (a KDE app - but it will of course run happily with whatever window manager/ desktop environment you prefer) Using the command line directly is quicker, but confusing at first. K3b is an excellent, user-friendly CD burning GUI program, with easy dialogs and buttons. XCDroast is fine, but k3b is easier to use, in my opinion.
Quoted 13 lines
Thanks & regards
Signature · 8 lines
Peter - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 4 lines · Peter H.
Season Greetings,
Slackware 10, Kernel 2.4.26
Quoted 8 lines
I got myself an Asus Atapi CD-RW-Drive and I am not sure if this was the right choice for Linux. I was able to make it work following the instruction of the program xcdroast, however, some things seem strange.
I always get error messages telling not to use atapi instead scsi.
I had a CD with picture files on. When I copied them to the HD I can't open them and copying back to the CD I can't open them as well any longer. In fact I can not mount the CD anymore. Only xcdroast can.
$ mount /mnt/cdrom mount: Not a directory
I've had similar problems with Slackware - it doesn't always set the /dev/cdrom symlink properly, and *really* has problems with external (SCSI, USB) CDROM drives. you might want to try the full mount command (as root):
mount -t iso9660 /dev/hdb /mnt/cdrom
Quoted 4 lines
Trying too boot Knoppix 3.4 from the CD I get only a blank screen. Booting from CD and then switching to HD, Knoppix works alright.
It seems that xcdroast can only write .wav and .iso files?????
Somewhat. k3b is better at creating iso files, and lets you drag and drop the file system on the CD, but sometimes (for more advanced efforts - creating bootable CD's, Mac-format CD's, etc) you still need to use the mkisofs | cdrecord command line combo.
Quoted 6 lines
Questions:
Is there a better CD-RW-Drive for Linux than Asus? The shop is willing to exxchange.
Are there better programs than xcdroast to R+W and which?
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 7 lines · Peter H.
Season Greetings,
Slackware 10, Kernel 2.4.26
I got myself an Asus Atapi CD-RW-Drive and I am not sure if this was the right choice for Linux. I was able to make it work following the instruction of the program xcdroast, however, some things seem strange.
I always get error messages telling not to use atapi instead scsi.
Are you using 'SCSI emulation' instead of ATAPI?
Quoted 8 lines
I had a CD with picture files on. When I copied them to the HD I can't open them and copying back to the CD I can't open them as well any longer. In fact I can not mount the CD anymore. Only xcdroast can.
$ mount /mnt/cdrom mount: Not a directoryTrying too boot Knoppix 3.4 from the CD I get only a blank screen. Booting from CD and then switching to HD, Knoppix works alright.
It seems that xcdroast can only write .wav and .iso files?????
Quoted 7 lines
Questions:
Is there a better CD-RW-Drive for Linux than Asus? The shop is willing to exxchange.
Are there better programs than xcdroast to R+W and which?
Thanks & regards
Dear Peter H.:
During instalation of Slackware, it offers SCSI emulation and places
the statement in the first (executed) line of lilo.conf. Here is mine:
head -n 9 /etc/lilo.conf
# LILO configuration file
# generated by 'liloconfig' # # Start LILO global section append="hdc=ide-scsi" boot = /dev/hdb2 message = /boot/boot_message.txt prompt timeout = 99
HTH, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
I'm coming into this discussion fairly late, so I'll try not to duplicate what others have already covered.
Quoted 6 lines · Peter H.
Season Greetings,
Slackware 10, Kernel 2.4.26
I got myself an Asus Atapi CD-RW-Drive and I am not sure if this was the right choice for Linux.
ATAPI drives are pretty standard things these days, so I'd be surprised if there was any special problem with this model as such. Any model will occasionally have an individual defective drive though, so you shouldn't completely rule out that possibility. But the rest of what you write leaves me guessing that you do not have a drive problem.
Quoted 4 lines
I was able to make it work following the instruction of the
program xcdroast, however, some things seem strange.I always get error messages telling not to use atapi instead scsi.
Others have said a lot here already, but I want to raise more fundamental puzzlement. I didn't know cdrecord (see below) was even able to burn to atapi devices under 2.4.x kernels. You might want to report the error messages in more detail.
Quoted 5 lines
I had a CD with picture files on. When I copied them to the HD I can't open them and copying back to the CD I can't open them as well any longer. In fact I can not mount the CD anymore. Only xcdroast can.
$ mount /mnt/cdrom mount: Not a directory
People have pretty much ignored this part of your message, and it's because (I think) it lacks any helpful detail. But it really is the heart of your inquiry, so you would benefit, I think, from filling in the missing pieces for us.
1. What kind of picture files?
2. How did you copy them to the HD? I'd assume you mean you mounted the CD, then used cp to transfer them ... but I've been burned before by assuming the "obvious" answers to things left out of trouble reports.
3. What application are you using to try to open them? How does it fail? Do the pictures display successfully in some other setting (if yes, details, please)?
4. How do you copy them back to the CD? (I don't even have a guess about this one.)
5. As to your mount problem ... what does the entry in /etc/fstab for /mnt/cdrom look like?
Quoted 2 lines
Trying too boot Knoppix 3.4 from the CD I get only a blank screen. Booting from CD and then switching to HD, Knoppix works alright.
I didn't see any responses to this one either, probably for the same reason as above. I would point out that this is (probably; you don't actually say) only a CD-reading issue, unrelated to any xcdroast issues you have. It is probably some problem specific to Knoppix CDs, an area where I have no experience ... perhaps a Knoppix user here can address this part separate from the rest of your query?
Quoted 1 line
It seems that xcdroast can only write .wav and .iso files?????
xcdroast is just a user interface to other applications that do the actual work. The actual writer (on my systems anyway) is cdrecord, and it can *write* anything you care to write.
The real issue is whether you can *read* what's written afterwards. The normal file types for reading are:
iso (contains an iso9660 filesystem that can be mounted by any
kernel that supports that filesystem type, or by any standard version of Windows or MacOS); and
wav (plays in any CD player that can physically read a CD-RW disk
and any Linux, Windows, or Mac software that knows how to treat a CD drive as a music source).
If you are trying to write some other type of file, you might want to tell us what it is and how you are trying to read it after it gets written.
Quoted 6 lines
Questions:
Is there a better CD-RW-Drive for Linux than Asus? The shop is willing to exxchange.
Are there better programs than xcdroast to R+W and which?
The other standard one is cdrdao. I'm under the impression that it has lagged relative to cdrecord, though, so it *probably* is not a solution to any of your problems.
Signature · 10 lines
No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 12/28/2004 - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Backup up Linux fileserver via Maxtor External Hard Drive
We recently purchased a Maxtor External Hard Drive 250gb OneTouchII. We were considering using this to backup data on our RedHat Linux 9 fileserver, hooking it directly to this fileserver. One unrelated issue is that the usb is probably 1.1 while specs are 2.0, though the drive does say it's 1.1 compatible. Second, what issues do we need to resolve in order for a. the Linux box to read the drive, and b. formatting the unformatted external drive to work with the Linux box?
Thanks,
Eve
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Re: Backup up Linux fileserver via Maxtor External Hard Drive
Quoted 7 lines · Eve Atley
We recently purchased a Maxtor External Hard Drive 250gb OneTouchII. We were considering using this to backup data on our RedHat Linux 9 fileserver, hooking it directly to this fileserver. One unrelated issue is that the usb is probably 1.1 while specs are 2.0, though the drive does say it's 1.1 compatible. Second, what issues do we need to resolve in order for a. the Linux box to read the drive, and b. formatting the unformatted external drive to work with the Linux box?
Eve -- I waited a bit before replying, in the hope that someone with more specific knowledge than I can offer would turn up. My own experience with USB drives is limited to flash drives (those little keychain thingies). But I suspect that the issues for these USB hard disks are the same, so I'll tell you what I know in the hope that you will find it helpful.
First, to mount and read the drive, you need a few things set in your kernel. (This is for 2.4.x kernels; if you use 2.6.x, the details may differ a bit.)
USB Storage -> Support for USB -> USB mass storage support
needs to be enabled (in kernel or loaded as a module)
In this area, you probably also want to enable
USB Storage -> Support for USB ->Preliminary USB device
filesystem
USB drives are mounted as scsi drives, so basic scsi drive support
needs to me provided, either in kernel or loaded as a set of modules (two, as I recall). Abd you need the /dev pseudofile entries for scsi devices, probably just /dev/sda and /dev/sda*
an appropriate filesystem driver needs to be loaded, in the kernel
or as a module; ext2 works fine.
Second, once you have all that set up, you should be able to use the usual tools to set up your USB drive. It will (probably; I don't know your setup) show up as /dev/sda, so you can fdisk that device to set up your partitions, then mkfs.ext2 whatever partitions you choose to set up, then use whatever you are used to using (cp, tar, whatever) to do the actual backups.
Third, one thing Linux is never very smart about is noticing when mounted filesystems are removed. You'll want to be careful to umount any filesystems on this drive before you disconnect it. (The USB stuff itself is fine about noticing the connection and disconnection of USB devices.) And ... this was probably obvious ... you need to umount the partitions after you connect the device.
Last, the only likely issue your use of USB 1.1 will raise is speed of packups. If that proves to be an issue for you, and your server is an i86 system, you might want to spend the US$10 or so for a PCI card that provides USB 2.0.
As I said at the outset, I haven't actually used these drives myself, so I'm extrapolating hee from my experiences with USB flash. If I've gotten some details wrong, I do hope that someone will spot them and post a correction.
Signature · 10 lines
No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 12/28/2004 - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Re: Backup up Linux fileserver via Maxtor External Hard Drive
In reply to Eve AtleyQuoted 10 lines · Eve Atley
We recently purchased a Maxtor External Hard Drive 250gb OneTouchII. We were considering using this to backup data on our RedHat Linux 9 fileserver, hooking it directly to this fileserver. One unrelated issue is that the usb is probably 1.1 while specs are 2.0, though the drive does say it's 1.1 compatible. Second, what issues do we need to resolve in order for a. the Linux box to read the drive, and b. formatting the unformatted external drive to work with the Linux box?
Thanks,
Eve
Hi, Eve:
I recently purchased a USB interface device that accepts a 2.5" hard
drive. It is USB 2.0 & 1.1 compatible, it just runs slower at v1.1 according to the documentation. I inserted one of my linux laptop driver and plugged it into my USB port of a Slackware v9.1, kernel 2.4.22, workstation and 'tail /var/log/messages' reported:
Dec 29 05:18:21 server kernel: hub.c: new USB device 00:10.3-6, assigned address 3 Dec 29 05:18:22 server kernel: scsi2 : SCSI emulation for USB Mass Storage devices Dec 29 05:18:35 server kernel: sdb: sdb1 sdb2 Dec 29 05:18:38 server usb.agent[1535]: missing kernel or user mode driver usb-storage
I am not sure what the last line meant but, knowing that my
1st partition is swap and the 2nd the working partition, I:
mount /dev/sdb2 /mnt/hd
mounts the filesystem at /mnt/hd :-)
'lsmod' |grep -i usb shows that
usb-storage and usbcore
are installed.
As Ray mentioned, if your new drive is unpartitioned and/or unformatted;
I assume that you can use 'fdisk' to partition and mkfs.???? to create a filesystem on it.
HTH, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Re: Backup up Linux fileserver via Maxtor External Hard Drive
Quoted 42 lines · chuck gelm
Quoted 10 lines · Eve Atley
We recently purchased a Maxtor External Hard Drive 250gb OneTouchII. We were considering using this to backup data on our RedHat Linux 9 fileserver, hooking it directly to this fileserver. One unrelated issue is that the usb is probably 1.1 while specs are 2.0, though the drive does say it's 1.1 compatible. Second, what issues do we need to resolve in order for a. the Linux box to read the drive, and b. formatting the unformatted external drive to work with the Linux box?
Thanks,
EveHi, Eve:
I recently purchased a USB interface device that accepts a 2.5" hard
drive. It is USB 2.0 & 1.1 compatible, it just runs slower at v1.1 according to the documentation. I inserted one of my linux laptop driver and plugged it into my USB port of a Slackware v9.1, kernel 2.4.22, workstation and 'tail/var/log/messages' reported:Dec 29 05:18:21 server kernel: hub.c: new USB device 00:10.3-6, assigned address 3 Dec 29 05:18:22 server kernel: scsi2 : SCSI emulation for USB Mass Storage devices Dec 29 05:18:35 server kernel: sdb: sdb1 sdb2 Dec 29 05:18:38 server usb.agent[1535]: missing kernel or user mode driver usb-storageI am not sure what the last line meant but, knowing that my
1st partition is swap and the 2nd the working partition, I:mount
/dev/sdb2/mnt/hdmounts the filesystem at
/mnt/hd:-)'lsmod' |grep -i usb shows that
usb-storage and usbcore
are installed.As Ray mentioned, if your new drive is unpartitioned and/or unformatted;
I assume that you can use 'fdisk' to partition and mkfs.???? to create a filesystem on it.
Quoted 8 lines
HTH, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quote "As Ray mentioned, if your new drive is unpartitioned and/or unformatted;
I assume that you can use 'fdisk' to partition and mkfs.???? to create a filesystem on it. "
To create a partion, run fdisk and partion the correct device. If you wish to format the drive with a file system, you can use:
mke2fs /dev/hdXX (sdXX for scsi) for an ext2 partition mke2fs -j /dev/hdXX for ext3 partition mkresierfs /dev/hdXX for a reiser3 partion
I personally use an ext2 on my boot partion, and a reiser 3 for everything else linux.
One more thing, the partitions must have a file system installed in order for you to mount them.
Jeremy
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Re: CD-RW-Drive & cdrecord & ATAPI
In reply to Ray OlszewskiRay Olszewski wrote:
<snip>
Quoted 1 line
Others have said a lot here already, but I want to raise more fundamental puzzlement. I didn't know cdrecord (see below) was even able to burn to atapi devices under 2.4.x kernels. You might want to report the error messages in more detail.
<snip>
Hi, Ray:
I am using Slackware v9.1, kernel 2.4.22, and a
"CRW-5224A, ATAPI CD/DVD-ROM drive"
'cdrecord' can 'burn' to ATAPI devices with SCSI emulation.
If append="hdc=ide-scsi" is parsed in lilo.conf during boot ( and you are using lilo as the boot loader
and /dev/hdc is your CDROM-RW device ;-)
then applications that default to using SCSI devices will use the ATAPI device. Here is a script that I use to burn data to my ATAPI CDROM-RW device:
#!/bin/bash
#
# /usr/local/bin/burncd.sh #
cat /usr/local/bin/burncd.sh
echo ""
echo " First argument is <$1>."
echo "Second argument is <$2>."
echo ""
eject -t ; close the CDROM tray
if [ -n $1 ] ; then
if [ -n $2 ] ; then
cdrecord -v dev=0,0,0 fs=64M speed=$2 driveropts=burnproof $1
else
echo "Second argument is burn speed [1 - 52] and must not be null."
fi
else
echo ""
echo "First argument is filename.ext and must not be null." echo ""
fi
mount /mnt/cdrom && ls -l /mnt/cdrom && umount /mnt/cdrom echo $1
eject
HTH, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Re: CD-RW-Drive & cdrecord & ATAPI
Quoted 11 lines · chuck gelm
Ray Olszewski wrote:
<snip>Quoted 1 line
Others have said a lot here already, but I want to raise more fundamental puzzlement. I didn't know cdrecord (see below) was even able to burn to atapi devices under 2.4.x kernels. You might want to report the error messages in more detail.
<snip>
Hi, Ray:
I am using Slackware v9.1, kernel 2.4.22, and a
"CRW-5224A, ATAPI CD/DVD-ROM drive"'cdrecord' can 'burn' to ATAPI devices with SCSI emulation.
Sorry, Chuck. Bad writing on my part. When I wrote the above, I meant to be referring to writing to atapi devices in native mode. I use scsi emulation here in pretty much the same way you do and have done so for years.
I was surprised (and still am) that Peter has an ATAPI CD burner running at all under 2.4.x, unless he is already using SCSI emulation (relevant since most of the feedback he got was about using SCSI emularion ... if he's already doing that, it won't help him).
Signature · 10 lines
No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 12/28/2004 - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs