: Kernel 2.6.10 with ALSA 1.08rc1 from CVS (12/30/2004)
Audigy2 Value - SB0400 card
Audigy2 Value- AUX-In and LINE-IN no sound
Message-ID: <[email protected]>
X-Priority: 3
X-Mailer: PHPMailer [version 1.72]
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="iso-8859-1"
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=773>
======================================================================
Reported By: hodgesw
Assigned To:
======================================================================
Project: ALSA - driver Issue ID: 773 Category: PCI - emu10k1 Reproducibility: always Severity: major Priority: normal Status: new Distribution: 1.08rc1 Kernel Version: 2.6.10 ====================================================================== Date Submitted: 01-01-2005 01:21 CET Last Modified: 01-01-2005 22:01 CET
======================================================================
Summary: Kernel 2.6.10 with ALSA 1.08rc1 from CVS
(12/30/2004)
Audigy2 Value - SB0400 card
Audigy2 Value- AUX-In and LINE-IN no sound
Description:
Kernel 2.6.10 with ALSA 1.08rc1 from CVS (12/30/2004) Audigy2 Value - SB0400 card
After trying many modprobe.preload/modprobe.conf alternatives I manually loaded driver using "modprobe -v snd-emu10k1" with /etc/modprobe.conf: "options snd-emu10k1 extin="0x3fff" After setting alsamixer volumes
"speakertest" works; "aplay" produces good sound; mic produces good sound;
"line in" does not work; "auxin" does nor work.
kde configure plays sound.
xmms cannot find sound card.
======================================================================
----------------------------------------------------------------------
hodgesw - 01-01-05 21:51
----------------------------------------------------------------------
Every device that alsamixer will let me set
i have set to 100%.
Mic work fine as do the speaker-test and kde configuator. Cdplay fails and tvtime (with defaults) fail
----------------------------------------------------------------------
rlrevell - 01-01-05 22:01
----------------------------------------------------------------------
This is a new driver after all (though based on emu10k1), its quite possible there's a bug. Can you try Windows to verify the hardware is OK?
Issue History
Date Modified Username Field Change
======================================================================
01-01-05 01:21 hodgesw New Issue 01-01-05 01:21 hodgesw Distribution => 1.08rc1 01-01-05 01:21 hodgesw Kernel Version => 2.6.10 01-01-05 02:27 rlrevell Note Added: 0003029 01-01-05 16:13 hodgesw Note Added: 0003032 01-01-05 18:44 rlrevell Note Added: 0003033 01-01-05 20:35 pzad Note Added: 0003035 01-01-05 21:51 hodgesw Note Added: 0003036 01-01-05 22:01 rlrevell Note Added: 0003037
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt