cpufreq - totally confused

Hi!

Due to nasty USB problems on my Thinkpad 2722 (Banias 1.5GHz) I've always switched to the most recent 'stable' kernel release. Up to now, 2.6.10 (debian source package) seems to solve my USB issues; alas! APM no longer works. However, ACPI has become useable and nearly everything seems to work right now; except the frequency scaling. With APM, cpufreq cpmpiled into the kernel and cpudynd I had two frequencies: 600MHz and 1.5GHz. Yesterday, while configuring the ACPI stuff gkrellm showed various other frequencies that seemed to correspond to the 8 throttling stages indicated in /proc/acpi/processor/CPU/throttling. Unfortunately, this nice behaviour somehow got lost and I am desperately trying to get it back.

The cpufreq settings in .config are listed below; ACPI stuff has been compiled as modules. Debians 2.6.10 has been patched with the latest swsusp2. Looking at /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq the lowest frequency is always 600MHz, while the value displayed yesterday in gkrellm's x86info plugin was definitely lower. So please give me a hint (which modules when to load; cpufreqd or cpudynd;...) to be able to use the throttling. What further information do you need?

In the meantime I have the switching between 0.6 and 1.5GHz, but I hope to reduce power consumption with additional lower frequencies.

Thanks in advance!

Best wishes,
Torsten

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_TABLE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y

-----------------------------------------------------------------------

cat /proc/cpuinfo

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 9
model name : Intel(R) Pentium(R) M processor 1500MHz
stepping : 5
cpu MHz : 598.160
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2
bogomips : 1182.92

-----------------------------------------------------------------------

cat /proc/acpi/processor/CPU/throttling

state count:             8
active state:            T0
states:
   *T0:                  00%
    T1:                  12%
    T2:                  25%
    T3:                  37%
    T4:                  50%
    T5:                  62%
    T6:                  75%
    T7:                  87%

Hi,

No, you don't really want that back. Throttling doesn't save you much (or anything); you want frequency and voltage scaling instead. And as ACPI only seems to export two such states, you should set

to n and

to n as well.

Dominik