Problem closing device handle
Hello
I'm developing software which captures audio and plays it from multiple sources in parallel.
I'm using plughw:1,0 device to capture and plug:'dmix:SLAVE="hw:1,0"', everything works fine (i mean play and capture), but when i try to close capture handle -snd_pcm_close(dev_handle)
i get following output:
ALSA lib pcm_hw.c:370:(snd_pcm_hw_hw_free) SNDRV_PCM_IOCTL_HW_FREE failed:
File descriptor in bad state
ALSA lib pcm_plug.c:69:(snd_pcm_plug_close) plug slaves mismatch
(second error about slaves mismatch appears not in all situation). After some debugging i found out following -
- this error occures only if i use playback (yes, playback, and error while trying to close capture handle). If i don't open playback device - it doesn't happens
- after this handle remains open, and i cannot open it again - if i close snd_pcm_close again, it finally closes, but it doesn't seems a nice solution
- it happens only when i use dmix plugin, when i use just plug plugin - everything is OK
Has anyone comments to this, is it some misconfiguration or something else? Thanks
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
volume PCM plugin
Hello.
Here is the patch (for alsa-lib-1.0.7) which is another attempt (compare to coftvol plugin) to emulate volume control in alsa-lib (see my previous post). The volume plugin is based on copy PCM plugin.
IMO the approach which is used here would allow more flexible configurations than softvol. E.g. it allows bind to master volume control in addition to emulated volume control. If necessary the volume plugin allows to easily extend number of hooks which can be attached to it (for now only one is supported).
Sample configuration
pcm.vol {
type volume
slave {
pcm some_plug
}
coeff 1.0
hook {
card default
control Master
index 0
}
}Note that
1. 'hook' is optional.
2. volume plugin does not convert PCM formats thus it is best used
with 'plug' PCM plugin for example.
/Petr.
Re: volume PCM plugin
At Mon, 17 Jan 2005 15:17:36 +0600,
Quoted 6 lines · Petr Gladkikh
Hello.
Here is the patch (for alsa-lib-1.0.7) which is another attempt (compare to coftvol plugin) to emulate volume control in alsa-lib (see my previous post). The volume plugin is based on copy PCM plugin.
Thanks for the patch.
Quoted 5 lines
IMO the approach which is used here would allow more flexible configurations than softvol. E.g. it allows bind to master volume control in addition to emulated volume control. If necessary the volume plugin allows to easily extend number of hooks which can be attached to it (for now only one is supported).
Handling with pthread looks nice. The only concern is that I'm not 100% sure whether pthread works in every application.
As in my last reply, the other features can be easiply implemented in softvol (the patch was attached there). The multiple hooks are easy to add as well.
So, for my eyes, only missing feature is the optimization of volume control change via pthread and poll(). Although ioctl is relative fast, it's of course better to eliminate to call at each time. Maybe we can the behavior selectable via config option. (The best optimization for this would be (read-only) mmap of
contorls, but it's not implemented :)
IMO, adding multiple plugins which work almost identically is just confusing. Let's integrate them, instead.
Takashi
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Re: volume PCM plugin
Quoted 7 lines · Takashi Iwai
At Mon, 17 Jan 2005 15:17:36 +0600,
Handling with pthread looks nice. The only concern is that I'm not 100% sure whether pthread works in every application.
As in my last reply, the other features can be easiply implemented in softvol (the patch was attached there). The multiple hooks are easy to add as well.
Of course I do not suggest to make many such plugins. But I need some time to inspect your code (my day work is Windows/C++ :).
Thanks for response.
/Petr
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt