IMQ with IPSec
Hi,
I would like to shape incomming traffic on eth0 and ipsec0 (binded to eth0). I need to set minimal bandwidth to some packets going via ipsec0 interface.
It is running fine when I simply mark the ESP (protocol 50) packets in the PREROUTING chain - means all ipsec packets are shaped.
Like:
iptables -t mangle -A PREROUTING -i eth0 -p 50 -j MARK --set-mark 30 iptables -t mangle -A PREROUTING -i eth0 -p 50 -j RETURN
The issue I'm dealing with is how can I mark packets based on internal destinantion/source IP in PREROUTING chain when it is encrypted ipsec packet. I can see the ipsec packet decrypted in FORWARD chain, but will that work correctly with IMQ, when I mark it here?
Thanks,
David
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/