Skip to contentSkip to conversation

2.6.10 ACPI on dell inspiron 8100

DISCUSSION Wakko Warner 2 participants 2 messages Jan 29, 2005 – Jan 30, 2005

lore
Share & tools
lore
#0 lore raw

I noticed something strange with ACPI and the battery:
/proc/acpi/battery/BAT1$ cat info

present:                 yes
design capacity:         57420 mWh
last full capacity:      57420 mWh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 3000 mWh
design capacity low:     1000 mWh
capacity granularity 1:  200 mWh
capacity granularity 2:  200 mWh
model number:            LIP8084DLP
serial number:           20495
battery type:            LION
OEM info:                Sony Corp.
/proc/acpi/battery/BAT1$ cat state 
present:                 yes
capacity state:          ok
charging state:          charging
present rate:            unknown
remaining capacity:      59040 mWh
present voltage:         16716 mV

/proc/acpi/battery/BAT1$

Is my laptop messed up or is ACPI not seeing proper values? How can I have 59040 remaining capacity when it the full capacity is 57420? Also the system didn't display the charging light so I know it's not charging.

I yanked the battery and I saw this:
/proc/acpi/battery/BAT1$ cat state

present:                 yes
capacity state:          ok
charging state:          charged
present rate:            unknown
remaining capacity:      0 mWh
present voltage:         0 mV

/proc/acpi/battery/BAT1$

Under BAT0, info and state show one line, present: no

Signature · 1 line
 Lab tests show that use of micro$oft causes cancer in lab animals
#1 lore raw

Hi!

Quoted 22 lines

I noticed something strange with ACPI and the battery:
/proc/acpi/battery/BAT1$ cat info

present:                 yes
design capacity:         57420 mWh
last full capacity:      57420 mWh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 3000 mWh
design capacity low:     1000 mWh
capacity granularity 1:  200 mWh
capacity granularity 2:  200 mWh
model number:            LIP8084DLP
serial number:           20495
battery type:            LION
OEM info:                Sony Corp.
/proc/acpi/battery/BAT1$ cat state 
present:                 yes
capacity state:          ok
charging state:          charging
present rate:            unknown
remaining capacity:      59040 mWh
present voltage:         16716 mV
Quoted 5 lines

/proc/acpi/battery/BAT1$

Is my laptop messed up or is ACPI not seeing proper values? How can I have 59040 remaining capacity when it the full capacity is 57420? Also the system didn't display the charging light so I know it's not charging.

That actually looks okay. Perhaps battery now stores more energy than it did last time. Different temperature or something. I'd not worry about this one.

I have machine where last full capacity is quite a bit bigger than design capacity; and that's okay, too.

Heh, but your battery gives 2V more than design voltage. That is slightly "interesting". Perhaps your voltage sensor is wrong and that's why remaining capacity is so high... Or perhaps your battery is slightly better than it should be.

Pavel

Signature · 2 lines
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!