New: bttv seems broken here
A message that is not in the archive (sent off-list or not yet received): [email protected]
JJ Luza and I found the problem. A patch to the I2C non-blocking changes is attached. JJ was a tremendous help on this.
-Corey
Quoted 14 lines · Andrew Morton
Not sure who to blame here ;)
Corey made some i2c changes...
Begin forwarded message:
Date: Sat, 5 Feb 2005 13:36:53 -0800
From: [email protected]
To: [email protected]
Subject: [Bug 4171] New: bttv seems broken here
Quoted 10 lines
Summary: bttv seems broken here
Kernel Version: 2.6.11-rc3-mm1
Status: NEW
Severity: normalDistribution: Debian Sid Hardware Environment: Nforce2 + gforce4 + leadtek winfast TV 2000 (Bt878) Software Environment: kernel module is
snd_bt87x(and tuner and bttv), and tv app is xdtv. Problem Description: I can't watch tv with this kernel (it worked with 2.6.10). There is no image or sound with xdtv, and I get these errors sent by kernel when I try to access the bttv device :
The I2C non-blocking patch would incorrectly return success in some cases because it wasn't updating the proper result variable. This patch fixes the problem. The bttv driver now works properly with the I2C non-blocking patch.
drivers/i2c/i2c-core.c +11 -9
@@ -899,9 +899,11 @@ entry->i2c.num);up (&adap->bus_lock); + entry->result = ret;return ret; }else {dev_dbg (&adap->dev,"I2C level transfers not supported\n" ); + entry->result = -ENOSYS ;return -ENOSYS ; } }
@@ -1491,7 +1493,7 @@ msg[0 ].len =1 ; msg[1 ].addr = entry->smbus.addr; msg[1 ].flags = entry->smbus.flags |I2C_M_RD ; - msg[1 ].len =1 ; + msg[1 ].len =0 ; msgbuf0[0 ] = entry->smbus.command;switch (entry->smbus.size) {
@@ -1593,17 +1595,17 @@/* Simulate a SMBus command using the i2c protocol No checking of parameters is done! */ -static s32 i2c_smbus_xfer_emulated (struct i2c_adapter * adap, -struct i2c_op_q_entry * entry) +static void i2c_smbus_xfer_emulated (struct i2c_adapter * adap, +struct i2c_op_q_entry * entry) { -if (i2c_smbus_emu_format (adap, entry)) -return -EINVAL ; - -if (i2c_transfer_entry (adap, entry) <0 ) -return -EINVAL ; +if (i2c_smbus_emu_format (adap, entry)) { + entry->result = -EINVAL ; +return ; + } -return entry->result; +/* Return value will be put into entry->result. */ +i2c_transfer_entry (adap, entry); } s32 i2c_smbus_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,