2.6.11-rc3: Kylix application no longer works?
Subsystems (2)
Hi!
I have some obscure Kylix application here... It started gets misteriously killed in 2.6.11-rc3 and -rc3-mm1...
pavel@amd:~/slovnik/bin$ strace ./Slovnik
execve("./Slovnik", ["./Slovnik"], [/* 32 vars */]) = 0
+++ killed by SIGKILL +++
pavel@amd:~/slovnik/bin$ ldd ./Slovnik
/usr/bin/ldd: line 1: 8759 Killed
LD_TRACE_LOADED_OBJECTS=1 LD_WARN= LD_BIND_NOW=
LD_LIBRARY_VERSION=$verify_out LD_VERBOSE= "$file"
pavel@amd:~/slovnik/bin$I get this in 2.6.10-rc3:
pavel@amd:~/slovnik/bin$ ./Slovnik
./Slovnik: relocation error: ./Slovnik: undefined symbol:
initPAnsiStrings
pavel@amd:~/slovnik/bin$ ldd ./Slovnik
libz.so.1 => /usr/lib/libz.so.1 (0xb7fc2000)
libX11.so.6 => /usr/X11/lib/libX11.so.6 (0xb7efa000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7ea9000)
libdl.so.2 => /lib/libdl.so.2 (0xb7ea6000)
libc.so.6 => /lib/libc.so.6 (0xb7d73000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0xb7fea000)
pavel@amd:~/slovnik/bin$When I set LD_LIBRARY_PATH right, it will actually work. Any ideas?
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Quoted 15 lines · Pavel Machek
I have some obscure Kylix application here... It started gets misteriously killed in 2.6.11-rc3 and -rc3-mm1...
pavel@amd:~/slovnik/bin$ strace ./Slovnik execve("./Slovnik", ["./Slovnik"], [/* 32 vars */]) = 0 +++ killed by SIGKILL +++ pavel@amd:~/slovnik/bin$ ldd ./Slovnik /usr/bin/ldd: line 1: 8759 Killed LD_TRACE_LOADED_OBJECTS=1 LD_WARN= LD_BIND_NOW= LD_LIBRARY_VERSION=$verify_out LD_VERBOSE= "$file" pavel@amd:~/slovnik/bin$I get this in 2.6.10-rc3:
Quoted 11 lines
pavel@amd:~/slovnik/bin$ ./Slovnik
./Slovnik: relocation error: ./Slovnik: undefined symbol:
initPAnsiStrings
pavel@amd:~/slovnik/bin$ ldd ./Slovnik
libz.so.1 => /usr/lib/libz.so.1 (0xb7fc2000)
libX11.so.6 => /usr/X11/lib/libX11.so.6 (0xb7efa000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7ea9000)
libdl.so.2 => /lib/libdl.so.2 (0xb7ea6000)
libc.so.6 => /lib/libc.so.6 (0xb7d73000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0xb7fea000)
pavel@amd:~/slovnik/bin$Does it work correctly under earlier kernels? If so, when did it break?
Quoted 1 line
When I set
LD_LIBRARY_PATHright, it will actually work. Any ideas?
Presumably you're picking up a different library without LD_LIBRARY_PATH. Perhaps that library is mucked up and the new uaccess checking code in binfmt_elf.c is now doing the right thing, and we were previously forgetting to report some error.
I wonder if reverting the patch will restore the old behaviour?
# This is a BitKeeper generated diff -Nru style patch. #
# ChangeSet
# 2005/01/21 13:42:18-08:00 [email protected] # Merge nuts.davemloft.net:/disk1/BK/sparcwork-2.6 # into nuts.davemloft.net:/disk1/BK/sparc-2.6 # # fs/binfmt_elf.c # 2005/01/21 13:42:06-08:00 [email protected] +0 -0 # Auto merged # # ChangeSet # 2005/01/17 13:38:38-08:00 [email protected] # [SPARC64]: Missing user access return value checks in fs/binfmt_elf.c and fs/compat.c # # Signed-off-by: David S. Miller <[email protected]> # # fs/compat_ioctl.c # 2005/01/17 13:37:56-08:00 [email protected] +12 -5 # [SPARC64]: Missing user access return value checks in fs/binfmt_elf.c and fs/compat.c # # fs/binfmt_elf.c # 2005/01/17 13:37:56-08:00 [email protected] +43 -19 # [SPARC64]: Missing user access return value checks in fs/binfmt_elf.c and fs/compat.c # diff -Nru a/fs/binfmt_elf.c b/fs/binfmt_elf.c --- a/fs/binfmt_elf.c 2005-02-07 14:50:07 -08:00 +++ b/fs/binfmt_elf.c 2005-02-07 14:50:07 -08:00 @@ -110,15 +110,17 @@ be in memory */
-static void padzero(unsigned long elf_bss)
+static int padzero(unsigned long elf_bss)
{
unsigned long nbyte;
nbyte = ELF_PAGEOFFSET(elf_bss);
if (nbyte) {
nbyte = ELF_MIN_ALIGN - nbyte;
- clear_user((void __user *) elf_bss, nbyte);
+ if (clear_user((void __user *) elf_bss, nbyte))
+ return -EFAULT;
}
+ return 0;
}
/* Let's use some macros to make this stack manipulation a litle clearer */
@@ -134,7 +136,7 @@
#define STACK_ALLOC(sp, len) ({ sp -= len ; sp; })
#endif
-static void
+static int
create_elf_tables(struct linux_binprm *bprm, struct elfhdr * exec,
int interp_aout, unsigned long load_addr, unsigned long interp_load_addr)
@@ -179,7 +181,8 @@
STACK_ALLOC(p, ((current->pid % 64) << 7));
#endif
u_platform = (elf_addr_t __user *)STACK_ALLOC(p, len);
- __copy_to_user(u_platform, k_platform, len);
+ if (__copy_to_user(u_platform, k_platform, len))
+ return -EFAULT;
}
/* Create the ELF interpreter info */
@@ -241,7 +244,8 @@
#endif
/* Now, let's put argc (and argv, envp if appropriate) on the stack */
- __put_user(argc, sp++);
+ if (__put_user(argc, sp++))
+ return -EFAULT;
if (interp_aout) {
argv = sp + 2;
envp = argv + argc + 1;
@@ -259,25 +263,29 @@
__put_user((elf_addr_t)p, argv++);
len = strnlen_user((void __user *)p, PAGE_SIZE*MAX_ARG_PAGES); if (!len || len > PAGE_SIZE*MAX_ARG_PAGES)
- return;
+ return 0;
p += len;
}
- __put_user(0, argv);
+ if (__put_user(0, argv))
+ return -EFAULT;
current->mm->arg_end = current->mm->env_start = p;
while (envc-- > 0) {
size_t len;
__put_user((elf_addr_t)p, envp++);
len = strnlen_user((void __user *)p, PAGE_SIZE*MAX_ARG_PAGES); if (!len || len > PAGE_SIZE*MAX_ARG_PAGES)
- return;
+ return 0;
p += len;
}
- __put_user(0, envp);
+ if (__put_user(0, envp))
+ return -EFAULT;
current->mm->env_end = p;
/* Put the elf_info on the stack in the right place. */ sp = (elf_addr_t __user *)envp + 1;
- copy_to_user(sp, elf_info, ei_index * sizeof(elf_addr_t));
+ if (copy_to_user(sp, elf_info, ei_index * sizeof(elf_addr_t)))
+ return -EFAULT;
+ return 0;
}
#ifndef elf_map
@@ -411,7 +419,11 @@
* that there are zero-mapped pages up to and including the
* last bss page.
*/
- padzero(elf_bss);
+ if (padzero(elf_bss)) {
+ error = -EFAULT;
+ goto out_close;
+ }
+
elf_bss = ELF_PAGESTART(elf_bss + ELF_MIN_ALIGN - 1); /* What we have mapped so far */
/* Map the last of the bss segment */
@@ -791,7 +803,11 @@
nbyte = ELF_MIN_ALIGN - nbyte; if (nbyte > elf_brk - elf_bss)
nbyte = elf_brk - elf_bss;
- clear_user((void __user *) elf_bss + load_bias, nbyte);
+ if (clear_user((void __user *) elf_bss + load_bias, nbyte)) {
+ retval = -EFAULT;
+ send_sig(SIGKILL, current, 0);
+ goto out_free_dentry;
+ }
}
}
@@ -875,7 +891,11 @@
send_sig(SIGKILL, current, 0);
goto out_free_dentry;
}
- padzero(elf_bss);
+ if (padzero(elf_bss)) {
+ send_sig(SIGSEGV, current, 0);
+ retval = -EFAULT; /* Nobody gets to see this, but.. */
+ goto out_free_dentry;
+ }
if (elf_interpreter) {
if (interpreter_type == INTERPRETER_AOUT)
@@ -1039,7 +1059,10 @@
goto out_free_ph;
elf_bss = elf_phdata->p_vaddr + elf_phdata->p_filesz;
- padzero(elf_bss);
+ if (padzero(elf_bss)) {
+ error = -EFAULT;
+ goto out_free_ph;
+ }
len = ELF_PAGESTART(elf_phdata->p_filesz + elf_phdata->p_vaddr + ELF_MIN_ALIGN - 1); bss = elf_phdata->p_memsz + elf_phdata->p_vaddr;
@@ -1246,8 +1269,8 @@
cputime_to_timeval(p->signal->cstime, &prstatus->pr_cstime);
}
-static void fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
- struct mm_struct *mm)
+static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
+ struct mm_struct *mm)
{
int i, len;
@@ -1257,8 +1280,9 @@
len = mm->arg_end - mm->arg_start;
if (len >= ELF_PRARGSZ)
len = ELF_PRARGSZ-1;
- copy_from_user(&psinfo->pr_psargs,
- (const char __user *)mm->arg_start, len);
+ if (copy_from_user(&psinfo->pr_psargs,
+ (const char __user *)mm->arg_start, len))
+ return -EFAULT;
for(i = 0; i < len; i++)
if (psinfo->pr_psargs[i] == 0)
psinfo->pr_psargs[i] = ' ';
@@ -1279,7 +1303,7 @@
SET_GID(psinfo->pr_gid, p->gid); strncpy(psinfo->pr_fname, p->comm, sizeof(psinfo->pr_fname));
- return;
+ return 0;
}
/* Here is the structure in which status of each thread is captured. */
Quoted 12 lines · Andrew Morton
I wonder if reverting the patch will restore the old behaviour?
# This is a BitKeeper generated diff -Nru style patch. #
# ChangeSet
# 2005/01/21 13:42:18-08:00 [email protected] # Merge nuts.davemloft.net:/disk1/BK/sparcwork-2.6
# into nuts.davemloft.net:/disk1/BK/sparc-2.6
# #fs/binfmt_elf.c
# 2005/01/21 13:42:06-08:00 [email protected] +0 -0
# Auto merged
# # ChangeSet
# 2005/01/17 13:38:38-08:00 [email protected] # [SPARC64]: Missing user access return value checks infs/binfmt_elf.candfs/compat.c
Quoted 8 lines
# # Signed-off-by: David S. Miller <[email protected]>
# #fs/compat_ioctl.c
# 2005/01/17 13:37:56-08:00 [email protected] +12 -5
# [SPARC64]: Missing user access return value checks infs/binfmt_elf.candfs/compat.c
# #fs/binfmt_elf.c
# 2005/01/17 13:37:56-08:00 [email protected] +43 -19
# [SPARC64]: Missing user access return value checks infs/binfmt_elf.candfs/compat.c
#
I think so. For a short period we applied this patch to the Gentoo 2.6.10 kernel...
http://dev.gentoo.org/~dsd/gentoo-dev-sources/release-10.01/dist/1900_umem_catch.patch
...but removed it once users complained it stopped kylix binaries from running.
Daniel
Quoted 6 lines · Daniel Drake
Quoted 5 lines
# fs/binfmt_elf.c # 2005/01/17 13:37:56-08:00 [email protected] +43 -19 # [SPARC64]: Missing user access return value checks in fs/binfmt_elf.c and fs/compat.c #
Quoted 6 lines
I think so. For a short period we applied this patch to the Gentoo 2.6.10 kernel...
http://dev.gentoo.org/~dsd/gentoo-dev-sources/release-10.01/dist/1900_umem_catch.patch
...but removed it once users complained it stopped kylix binaries from running.
Bah. That's what happens when you fix stuff.
What's kylix? The Borland C++ builder thing?
How should one set about reproducing this problem?
Quoted 10 lines · Andrew Morton
Quoted 9 lines · Daniel Drake
Quoted 5 lines
# fs/binfmt_elf.c # 2005/01/17 13:37:56-08:00 [email protected] +43 -19 # [SPARC64]: Missing user access return value checks in fs/binfmt_elf.c and fs/compat.c #I think so. For a short period we applied this patch to the Gentoo 2.6.10 kernel...
Quoted 7 lines
Quoted 3 lines
http://dev.gentoo.org/~dsd/gentoo-dev-sources/release-10.01/dist/1900_umem_catch.patch
...but removed it once users complained it stopped kylix binaries from running.
Bah. That's what happens when you fix stuff.
What's kylix? The Borland C++ builder thing?
Rather Delphi (== Object Pascal) thing.
Quoted 1 line
How should one set about reproducing this problem?
IIRC, Some minimal "personal" version can be downloaded from borland.com.
Grzegorz Kulewski
Quoted 19 lines · Grzegorz Kulewski
Quoted 16 lines · Andrew Morton
Quoted 6 lines · Daniel Drake
Quoted 5 lines
# fs/binfmt_elf.c # 2005/01/17 13:37:56-08:00 [email protected] +43 -19 # [SPARC64]: Missing user access return value checks in fs/binfmt_elf.c and fs/compat.c #Quoted 6 lines
I think so. For a short period we applied this patch to the Gentoo 2.6.10 kernel...
http://dev.gentoo.org/~dsd/gentoo-dev-sources/release-10.01/dist/1900_umem_catch.patch
...but removed it once users complained it stopped kylix binaries from running.
Bah. That's what happens when you fix stuff.
Quoted 8 lines
Quoted 1 line
What's kylix? The Borland C++ builder thing?
Rather Delphi (== Object Pascal) thing.
Quoted 1 line
How should one set about reproducing this problem?
IIRC, Some minimal "personal" version can be downloaded from borland.com.
Well I'd prefer that we not back out the whole patch. Could someone please test with something like the below, let us know exactly where it's falling over?
fs/binfmt_elf.c renamed from fs/binfmt_elf.c~a +17 -5
@@ -44,6 +44,8 @@#include <linux/elf.h> +#define D () do { printk("%s:%d\n", __FILE__, __LINE__); dump_stack(); } while (0) +static int load_elf_binary (struct linux_binprm * bprm,struct pt_regs * regs);static int load_elf_library (struct file *);static unsigned long elf_map (struct file *,unsigned long ,struct elf_phdr *,int ,int );
@@ -181,8 +183,10 @@ create_elf_tables(struct linux_binprm *bSTACK_ALLOC (p, ((current->pid %64 ) <<7 ));#endif u_platform = (elf_addr_t __user *)STACK_ALLOC (p, len); -if (__copy_to_user (u_platform, k_platform, len)) +if (__copy_to_user (u_platform, k_platform, len)) { +D ();return -EFAULT ; + } }/* Create the ELF interpreter info */
@@ -244,8 +248,10 @@ create_elf_tables(struct linux_binprm *b#endif /* Now, let's put argc (and argv, envp if appropriate) on the stack */ -if (__put_user (argc, sp++)) +if (__put_user (argc, sp++)) { +D ();return -EFAULT ; + }if (interp_aout) { argv = sp +2 ; envp = argv + argc +1 ;
@@ -266,8 +272,10 @@ create_elf_tables(struct linux_binprm *breturn 0 ; p += len; } -if (__put_user (0 , argv)) +if (__put_user (0 , argv)) { +D ();return -EFAULT ; + } current->mm->arg_end = current->mm->env_start = p;while (envc-- >0 ) {size_t len;
@@ -277,14 +285,18 @@ create_elf_tables(struct linux_binprm *breturn 0 ; p += len; } -if (__put_user (0 , envp)) +if (__put_user (0 , envp)) { +D ();return -EFAULT ; + } current->mm->env_end = p;/* Put the elf_info on the stack in the right place. */ sp = (elf_addr_t __user *)envp +1 ; -if (copy_to_user (sp, elf_info, ei_index *sizeof (elf_addr_t))) +if (copy_to_user (sp, elf_info, ei_index *sizeof (elf_addr_t))) { +D ();return -EFAULT ; + }return 0 ; }
_
Hi Andrew,
Quoted 5 lines · Andrew Morton
Bah. That's what happens when you fix stuff.
What's kylix? The Borland C++ builder thing?
How should one set about reproducing this problem?
You don't need the kylix environment or libraries, you just need to run any binary that was compiled with kylix. Teamspeak was the one that brought the issue to our attention. Here's a direct link:
ftp://ftp.freenet.de/pub/4players/teamspeak.org/releases/ts2_client_rc2_2032.tar.bz2
I will test your diagnosis patch later today, if nobody else has.
Daniel
Hi!
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
How should one set about reproducing this problem?
IIRC, Some minimal "personal" version can be downloaded from borland.com.
Well I'd prefer that we not back out the whole patch. Could someone please test with something like the below, let us know exactly where it's falling over?
Sorry, it seems your debugging traps do not trigger. I'll try other patches...
Pavel
Quoted 20 lines
fs/binfmt_elf.c renamed from fs/binfmt_elf.c~a +5
-1@@ -44,6 +44,8 @@#include <linux/elf.h> +#define D () do { printk("%s:%d\n", __FILE__, __LINE__); dump_stack(); } while (0) +static int load_elf_binary (struct linux_binprm * bprm,struct pt_regs * regs);static int load_elf_library (struct file *);static unsigned long elf_map (struct file *,unsigned long ,struct elf_phdr *,int ,int );@@ -181,8 +183,10 @@ create_elf_tables(struct linux_binprm *bSTACK_ALLOC (p, ((current->pid %64 ) <<7 ));#endif u_platform = (elf_addr_t __user *)STACK_ALLOC (p, len); -if (__copy_to_user (u_platform, k_platform, len)) +if (__copy_to_user (u_platform, k_platform, len)) { +D ();return -EFAULT ; + }
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Hi!
Quoted 1 line
I wonder if reverting the patch will restore the old behaviour?
Yes, this fixes it: kylix application now works for me.
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Hi!
Quoted 1 line
I wonder if reverting the patch will restore the old behaviour?
This seems to be minimal fix to get Kylix application back to the working state... Maybe it is good idea for 2.6.11?
Pavel
fs/binfmt_elf.c +2 -5
@@ -803,11 +803,8 @@ nbyte =ELF_MIN_ALIGN - nbyte;if (nbyte > elf_brk - elf_bss) nbyte = elf_brk - elf_bss; -if (clear_user ((void __user *) elf_bss + load_bias, nbyte)) { - retval = -EFAULT ; -send_sig (SIGKILL , current,0 ); - goto out_free_dentry; - } +if (clear_user ((void __user *) elf_bss + load_bias, nbyte)) +printk (KERN_ERR "Error clearing BSS, wrong ELF executable? (Kylix?!)\n" ); } }
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Quoted 13 lines · On Tue, 8 Feb 2005 18:51:06 +0100 Pavel Machek <[email protected]> wrote:
Hi!
Quoted 1 line
I wonder if reverting the patch will restore the old behaviour?
This seems to be minimal fix to get Kylix application back to the working state... Maybe it is good idea for 2.6.11?
Signed-off-by Pavel Machek <[email protected]>Pavel
fs/binfmt_elf.c line 807
Quoted 10 lines
fs/binfmt_elf.c +2
-5@@ -803,11 +803,8 @@ nbyte =ELF_MIN_ALIGN - nbyte;if (nbyte > elf_brk - elf_bss) nbyte = elf_brk - elf_bss; -if (clear_user ((void __user *) elf_bss + load_bias, nbyte)) { - retval = -EFAULT ; -send_sig (SIGKILL , current,0 ); - goto out_free_dentry; - } +if (clear_user ((void __user *) elf_bss + load_bias, nbyte)) +printk (KERN_ERR "Error clearing BSS, wrong ELF executable? (Kylix?!)\n" );
do once or rate limit rather than log spamming.
Signature · 1 line
Stephen Hemminger <[email protected]>
Quoted 6 lines · Pavel Machek
Hi!
Quoted 1 line
I wonder if reverting the patch will restore the old behaviour?
This seems to be minimal fix to get Kylix application back to the working state... Maybe it is good idea for 2.6.11?
Why does clearing the BSS fail? Are the program headers bogus? (readelf -l).
Signature · 2 lines
Daniel Jacobowitz CodeSourcery, LLC
Hi!
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
I wonder if reverting the patch will restore the old behaviour?
This seems to be minimal fix to get Kylix application back to the working state... Maybe it is good idea for 2.6.11?
Why does clearing the BSS fail? Are the program headers bogus? (readelf -l).
No idea, probably yes. Here's readelf -l result:
Pavel
Elf file type is EXEC (Executable file) Entry point 0x80614b4
There are 5 program headers, starting at offset 52
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
PHDR 0x000034 0x08048034 0x08048034 0x000a0 0x000a0 R E 0x4
INTERP 0x0000d4 0x080480d4 0x080480d4 0x00013 0x00013 R 0x1
[Requesting program interpreter: /lib/ld-linux.so.2]
LOAD 0x000000 0x08048000 0x08048000 0xb7354 0x1b7354 R E 0x1000
LOAD 0x0b7354 0x08200354 0x08200354 0x1e3e4 0x1f648 RW 0x1000
DYNAMIC 0x0d56a0 0x0821e6a0 0x0821e6a0 0x00098 0x00098 RW 0x4 Section to Segment mapping:
Segment Sections...
00
01 .interp 02 .interp .dynsym .dynstr .hash .rel.plt .plt .text borland.ressym borland.resstr borland.reshash borland.resdata borland.resspare 03 .data .rodata .got .dynamic .bss 04 .dynamic
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Quoted 14 lines · Stephen Hemminger
Quoted 10 lines · On Tue, 8 Feb 2005 18:51:06 +0100 Pavel Machek <[email protected]> wrote:
Hi!
Quoted 1 line
I wonder if reverting the patch will restore the old behaviour?
This seems to be minimal fix to get Kylix application back to the working state... Maybe it is good idea for 2.6.11?
Signed-off-by Pavel Machek <[email protected]>Pavel
Quoted 15 lines
fs/binfmt_elf.c line 807
Quoted 13 lines
fs/binfmt_elf.c +2
-5@@ -803,11 +803,8 @@ nbyte =ELF_MIN_ALIGN - nbyte;if (nbyte > elf_brk - elf_bss) nbyte = elf_brk - elf_bss; -if (clear_user ((void __user *) elf_bss + load_bias, nbyte)) { - retval = -EFAULT ; -send_sig (SIGKILL , current,0 ); - goto out_free_dentry; - } +if (clear_user ((void __user *) elf_bss + load_bias, nbyte)) +printk (KERN_ERR "Error clearing BSS, wrong ELF executable? (Kylix?!)\n" );do once or rate limit rather than log spamming.
We could just remove the printk and stick a comment over it. If the application later tries to access the not-there pages then it'll just fault.
However I worry if there is some way in which we can leave unzeroed memory accessible to the application, although it's hard to see how that could happen.
Daniel, Pavel cruelly chopped you off the Cc when replying. What's your diagnosis on the below?
Begin forwarded message:
Date: Tue, 8 Feb 2005 23:27:59 +0100
From: Pavel Machek <[email protected]>
To: Andrew Morton <[email protected]>, [email protected]
Subject: Re: 2.6.11-rc3: Kylix application no longer works?
Hi!
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
I wonder if reverting the patch will restore the old behaviour?
This seems to be minimal fix to get Kylix application back to the working state... Maybe it is good idea for 2.6.11?
Why does clearing the BSS fail? Are the program headers bogus? (readelf -l).
No idea, probably yes. Here's readelf -l result:
Pavel
Elf file type is EXEC (Executable file) Entry point 0x80614b4
There are 5 program headers, starting at offset 52
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
PHDR 0x000034 0x08048034 0x08048034 0x000a0 0x000a0 R E 0x4
INTERP 0x0000d4 0x080480d4 0x080480d4 0x00013 0x00013 R 0x1
[Requesting program interpreter: /lib/ld-linux.so.2]
LOAD 0x000000 0x08048000 0x08048000 0xb7354 0x1b7354 R E 0x1000
LOAD 0x0b7354 0x08200354 0x08200354 0x1e3e4 0x1f648 RW 0x1000
DYNAMIC 0x0d56a0 0x0821e6a0 0x0821e6a0 0x00098 0x00098 RW 0x4 Section to Segment mapping:
Segment Sections...
00
01 .interp 02 .interp .dynsym .dynstr .hash .rel.plt .plt .text borland.ressym borland.resstr borland.reshash borland.resdata borland.resspare 03 .data .rodata .got .dynamic .bss 04 .dynamic
Signature · 7 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl! - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Hi!
Quoted 28 lines
Quoted 8 lines
Quoted 8 lines
Quoted 1 line
I wonder if reverting the patch will restore the old behaviour?
This seems to be minimal fix to get Kylix application back to the working state... Maybe it is good idea for 2.6.11?
Signed-off-by Pavel Machek <[email protected]>Pavel
Quoted 15 lines
fs/binfmt_elf.c line 807
Quoted 13 lines
fs/binfmt_elf.c +2
-5@@ -803,11 +803,8 @@ nbyte =ELF_MIN_ALIGN - nbyte;if (nbyte > elf_brk - elf_bss) nbyte = elf_brk - elf_bss; -if (clear_user ((void __user *) elf_bss + load_bias, nbyte)) { - retval = -EFAULT ; -send_sig (SIGKILL , current,0 ); - goto out_free_dentry; - } +if (clear_user ((void __user *) elf_bss + load_bias, nbyte)) +printk (KERN_ERR "Error clearing BSS, wrong ELF executable? (Kylix?!)\n" );do once or rate limit rather than log spamming.
We could just remove the printk and stick a comment over it. If the application later tries to access the not-there pages then it'll just fault.
Quoted 6 lines
However I worry if there is some way in which we can leave unzeroed memory accessible to the application, although it's hard to see how that could happen.
Daniel, Pavel cruelly chopped you off the Cc when replying. What's your diagnosis on the below?
Not me, my mailer did it :-). No, don't know what went wrong, and I forwarded the message to Daniel; his reaction was:
Quoted 5 lines
Elf file type is EXEC (Executable file) Entry point
0x80614b4
There are 5 program headers, starting at offset 52
Quoted 14 lines
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg
Align
PHDR0x0000340x080480340x080480340x000a00x000a0R E0x4
INTERP0x0000d40x080480d40x080480d40x000130x00013R0x1
[Requesting program interpreter:/lib/ld-linux.so.2]
LOAD0x0000000x080480000x080480000xb73540x1b7354R E0x1000
LOAD0x0b73540x082003540x082003540x1e3e40x1f648RW0x1000
DYNAMIC0x0d56a00x0821e6a00x0821e6a00x000980x00098RW0x4
Looks fine but it's probably the first load segment: that's a megabyte of blank space at the end...
that's all I can see.
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Quoted 10 lines · Andrew Morton
We could just remove the printk and stick a comment over it. If the application later tries to access the not-there pages then it'll just fault.
However I worry if there is some way in which we can leave unzeroed memory accessible to the application, although it's hard to see how that could happen.
Daniel, Pavel cruelly chopped you off the Cc when replying. What's your diagnosis on the below?
It's asking for a lot of unwritable zeroed space. See this:
Quoted 2 lines
LOAD
0x0000000x080480000x080480000xb73540x1b7354R E0x1000
LOAD0x0b73540x082003540x082003540x1e3e40x1f648RW0x1000
The 0xb7354 is size to map from the file, the 0x1b7354 is size to map in memory. We're supposed to zero-fill the rest. Now that I think about it I can see why this is a problem - the kernel probably assumes that any segment with MemSiz > FileSiz will be writable. Certainly it's a bit weird for the app to request unwritable zeroed pages.
clear_user's probably not the right way to provide the extra zeroing.
Signature · 2 lines
Daniel Jacobowitz CodeSourcery, LLC
Quoted 8 lines · Daniel Jacobowitz
On Tue, Feb 08, 2005 at 06:10:18PM -0800, Andrew Morton wrote:
It's asking for a lot of unwritable zeroed space. See this:
Quoted 2 lines
LOAD
0x0000000x080480000x080480000xb73540x1b7354R E0x1000
LOAD0x0b73540x082003540x082003540x1e3e40x1f648RW0x1000clear_user's probably not the right way to provide the extra zeroing.
Indeed, clear_user() refuses to zero data when it's not writable to the user process ...
unsigned longclear_user(void __user *to, unsigned long n)
{
might_sleep();
if (access_ok(VERIFY_WRITE, to, n))
__do_clear_user(to, n);
return n;
}Signature · 3 lines
"Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it." - Brian W. Kernighan
Hi,
Quoted 11 lines · Rik van Riel
Quoted 7 lines · Daniel Jacobowitz
On Tue, Feb 08, 2005 at 06:10:18PM -0800, Andrew Morton wrote:
It's asking for a lot of unwritable zeroed space. See this:Quoted 3 lines
LOAD
0x0000000x080480000x080480000xb73540x1b7354R E0x1000LOAD0x0b73540x082003540x082003540x1e3e40x1f648RW0x1000clear_user's probably not the right way to provide the extra zeroing.
Indeed,
clear_user()refuses to zero data when it's not writable to the user process ...
So if the application wants an read only range of zeroed pages, why not just map the ZERO_PAGE() multiple times there?
I can imagine _valid_ uses for that (templates for zero intitialized data), although there are _better_ ways to do that.
Regards
Ingo Oeser