qla1280: remove qla1280_proc_info

@@ -670,8 +673,6 @@ static struct qla_boards ql1280_board_tb
 };
 
 static int qla1280_verbose = 1;
-static int qla1280_buffer_size;
-static char *qla1280_buffer;
 
 #if DEBUG_QLA1280
 static int ql_debug_level = 1;

@@ -694,97 +695,6 @@ static int ql_debug_level = 1;
 #define LEAVE_INTR(x)		dprintk(4, "qla1280 : Leaving %s()\n", x);
 
 
-/*************************************************************************
- * qla1280_proc_info
- *
- * Description:
- *   Return information to handle /proc support for the driver.
- *
- * buffer - ptrs to a page buffer
- *
- * Returns:
- *************************************************************************/
-#define	PROC_BUF	&qla1280_buffer[len]
-
-static int qla1280_proc_info(struct Scsi_Host *host, char *buffer,
-			     char **start, off_t offset, int length, int inout)
-{
-	struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-	struct qla_boards *bdp = &ql1280_board_tbl[ha->devnum];
-	int size = 0;
-	int len = 0;
-
-	if (inout)
-		return -ENOSYS;
-
-	/*
-	 * if our old buffer is the right size use it otherwise
-	 * allocate a new one.
-	 */
-	if (qla1280_buffer_size != PAGE_SIZE) {
-		/* deallocate this buffer and get a new one */
-		if (qla1280_buffer != NULL) {
-			free_page((unsigned long)qla1280_buffer);
-			qla1280_buffer_size = 0;
-		}
-		qla1280_buffer = (char *)get_zeroed_page(GFP_KERNEL);
-	}
-	if (qla1280_buffer == NULL) {
-		size = sprintf(buffer, "qla1280 - kmalloc error at line %d\n",
-			       __LINE__);
-		return size;
-	}
-	/* save the size of our buffer */
-	qla1280_buffer_size = PAGE_SIZE;
-
-	/* 3.20 clear the buffer we use for proc display */
-	memset(qla1280_buffer, 0, PAGE_SIZE);
-
-	/* start building the print buffer */
-	size = sprintf(PROC_BUF,
-		       "QLogic PCI to SCSI Adapter for ISP 1280/12160:\n"
-		       "        Firmware version: %2d.%02d.%02d, Driver version %s\n",
-		       bdp->fwver[0], bdp->fwver[1], bdp->fwver[2],
-		       QLA1280_VERSION);
-
-	len += size;
-
-	size = sprintf(PROC_BUF, "SCSI Host Adapter Information: %s\n",
-		       bdp->name);
-	len += size;
-	size = sprintf(PROC_BUF, "Request Queue count= 0x%x, Response "
-		       "Queue count= 0x%x\n",
-		       REQUEST_ENTRY_CNT, RESPONSE_ENTRY_CNT);
-	len += size;
-	size = sprintf(PROC_BUF, "Number of pending commands = 0x%lx\n",
-		       ha->actthreads);
-	len += size;
-	size = sprintf(PROC_BUF, "Number of free request entries = %d\n",
-		       ha->req_q_cnt);
-	len += size;
-	size = sprintf(PROC_BUF, "\n");	/* 1       */
-	len += size;
-
-	if (len >= qla1280_buffer_size) {
-		printk(KERN_WARNING
-		       "qla1280: Overflow buffer in qla1280_proc.c\n");
-	}
-
-	if (offset > len - 1) {
-		free_page((unsigned long) qla1280_buffer);
-		qla1280_buffer = NULL;
-		qla1280_buffer_size = length = 0;
-		*start = NULL;
-	} else {
-		*start = &qla1280_buffer[offset];	/* Start of wanted data */
-		if (len - offset < length) {
-			length = len - offset;
-		}
-	}
-	return length;
-}
-
-
 static int qla1280_read_nvram(struct scsi_qla_host *ha)
 {
 	uint16_t *wptr;

@@ -1334,22 +1244,6 @@ qla1280_biosparam_old(Disk * disk, kdev_
 {
 	return qla1280_biosparam(disk->device, NULL, disk->capacity, geom);
 }
-
-static int
-qla1280_proc_info_old(char *buffer, char **start, off_t offset, int length,
-		      int hostno, int inout)
-{
-	struct Scsi_Host *host;
-
-	for (host = scsi_hostlist; host; host = host->next) {
-		if (host->host_no == hostno) {
-			return qla1280_proc_info(host, buffer, start,
-						 offset, length, inout);
-		}
-	}
-
-	return -ESRCH;
-}
 #endif
 
 /**************************************************************************

@@ -4668,7 +4554,6 @@ static struct scsi_host_template qla1280
 	.eh_bus_reset_handler	= qla1280_eh_bus_reset,
 	.eh_host_reset_handler	= qla1280_eh_adapter_reset,
 	.bios_param		= qla1280_biosparam,
-	.proc_info		= qla1280_proc_info,
 	.can_queue		= 0xfffff,
 	.this_id		= -1,
 	.sg_tablesize		= SG_ALL,

@@ -4688,7 +4573,6 @@ static Scsi_Host_Template qla1280_driver
 	.eh_bus_reset_handler	= qla1280_eh_bus_reset,
 	.eh_host_reset_handler	= qla1280_eh_adapter_reset,
 	.bios_param		= qla1280_biosparam_old,
-	.proc_info		= qla1280_proc_info_old,
 	.can_queue		= 0xfffff,
 	.this_id		= -1,
 	.sg_tablesize		= SG_ALL,