Skip to contentSkip to conversation

avoiding pci_disable_device()...

DISCUSSION Michal Rokos 2 participants 2 messages Feb 14, 2005 Network drivers

lore
Share & tools
lore
#0 lore raw

Hello,

Quoted 6 lines

Currently, in almost every PCI driver, if pci_request_regions() fails -- indicating another driver is using the hardware -- then pci_disable_device() is called on the error path, disabling a device that another driver is using

To call this "rather rude" is an understatement :)

I believe this is needed for natsemi to be inline with $SUBJ.

drivers/net/natsemi.c 2005-02-14 11:36:00.000000000 +0100 renamed from drivers/net/natsemi.c 2005-02-14 11:34:53.000000000 +0100 +22 -12
@@ -811,6 +811,7 @@
        void __iomem *ioaddr;
        const int pcibar = 1; /* PCI base address register */
        int prev_eedata;
+       int pci_dev_busy = 0;
        u32 tmp;
 
 /* when built into the kernel, we only print version if device is found */
@@ -821,7 +822,13 @@
 #endif
 
        i = pci_enable_device(pdev);
-       if (i) return i;
+       if (i) goto out;
+
+       i = pci_request_regions(pdev, DRV_NAME);
+       if (i) {
+               pci_dev_busy = 1;
+               goto err_pci_request_regions;
+       }
 
        /* natsemi has a non-standard PM control register
         * in PCI config space.  Some boards apparently need
@@ -843,15 +850,13 @@
                pci_set_master(pdev);
 
        dev = alloc_etherdev(sizeof (struct netdev_private));
-       if (!dev)
-               return -ENOMEM;
+       if (!dev) {
+               i = -ENOMEM;
+               goto err_alloc_etherdev;
+       }
        SET_MODULE_OWNER(dev);
        SET_NETDEV_DEV(dev, &pdev->dev);
 
-       i = pci_request_regions(pdev, DRV_NAME);
-       if (i)
-               goto err_pci_request_regions;
-
        ioaddr = ioremap(iostart, iosize);
        if (!ioaddr) {
                i = -ENOMEM;
@@ -992,15 +997,20 @@
        }
        return 0;
 
- err_register_netdev:
+err_register_netdev:
        iounmap(ioaddr);
 
- err_ioremap:
-       pci_release_regions(pdev);
+err_ioremap:
        pci_set_drvdata(pdev, NULL);
-
- err_pci_request_regions:
        free_netdev(dev);
+
+err_alloc_etherdev:
+       pci_release_regions(pdev);
+
+err_pci_request_regions:
+       if (!pci_dev_busy)
+               pci_disable_device(pdev);
+out:
        return i;
 }
#1 lore raw
Quoted 10 lines · Michal Rokos

Hello,

Quoted 6 lines

Currently, in almost every PCI driver, if pci_request_regions() fails -- indicating another driver is using the hardware -- then pci_disable_device() is called on the error path, disabling a device that another driver is using

To call this "rather rude" is an understatement :)

I believe this is needed for natsemi to be inline with $SUBJ.

Why? I don't think there's any old-style driver for natsemi. And if there was please switch it to use modern pci probing or kill it.