2.6.11-rc[234] setfont fails on i810 after resume from ACPI-S3
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi!
Quoted 2 lines
Any thoughts on this one? We should come back from resume in 30-row mode, shouldn't we?
Well, current state of video resume is "we are happy to see anything at all".
Quoted 7 lines
HW info
Using vga=0xf07, default8x16 font, display has 30 lines
On powerup from S3 console has only 25 lines but still scrolls at 30 lines. Setfont historically fixes it.
Quoted 6 lines
Tested with 2.6.10, 2.6.11-rc1: OK
Tested with 2.6.11-rc2-Vanilla and 2.6.11-rc[234]+swsusp2. When using setfont, screen goes blank. Power up after S3 returns console in 25 lines mode with 30 lines scroll. Several attempts - same result.
So... screen goes blank even when suspend is not involved, right? Sounds like a bug to me ;-).
Quoted 7 lines
Another bug I see only on this HW and only with 2.6 is that when - and only when - using gentoo emerge --usepackage in text console, scroll area resets to _25_ when portage "dumps" the (binary) package contents which scrolls pretty fast. I was unable to reproduce this in any other way. Tried also echo loop in bash but perhaps it is too slow or not random enough. Note that 2.4.2[789] no problem.
Well, dumping random stuff to console can produce funny results. I'd call that normal. Try cat /dev/urandom, that should be "enough random".
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Quoted 35 lines · Pavel Machek
Hi!
Quoted 2 lines
Any thoughts on this one? We should come back from resume in 30-row mode, shouldn't we?
Well, current state of video resume is "we are happy to see anything at all".
Quoted 11 lines
HW info
Using vga=0xf07, default8x16 font, display has 30 lines
On powerup from S3 console has only 25 lines but still scrolls at 30 lines. Setfont historically fixes it.
Tested with 2.6.10, 2.6.11-rc1: OK
Tested with 2.6.11-rc2-Vanilla and 2.6.11-rc[234]+swsusp2.
When using setfont, screen goes blank. Power up after S3
returns console in 25 lines mode with 30 lines scroll. Several attempts - same result.So... screen goes blank even when suspend is not involved, right? Sounds like a bug to me ;-).
Quoted 5 lines
Another bug I see only on this HW and only with 2.6 is that
when - and only when - using gentoo emerge --usepackage in
text console, scroll area resets to _25_ when portage "dumps" the (binary) package contents which scrolls pretty fast. I was unable to reproduce this in any other way. Tried also echo loop in bash but perhaps it is too slow or not random enough. Note that 2.4.2[789] no problem.
Quoted 5 lines
Well, dumping random stuff to console can produce funny results. I'd call that normal. Try cat
/dev/urandom, that should be "enough random".Pavel
I am also getting strange effects. I boot into 2.6.11-rc4 and the console fonts looks fine. Come back a day later and the console font has
corrupt characters. E.g. Displays a "D" instead of an "L" and stuff
like that. It is mostly readable, except for a few characters.
It is only the local console that is corrupted. ssh into the box displays correct characters, so all I can assume is that the VGA console is being programmed with different characters. The bad characters also survive a soft reboot( During BIOS boot up), until the linux kernel starts booting, and then it switches to a good font.
Quoted 35 lines · Pavel Machek
Hi!
Quoted 2 lines
Any thoughts on this one? We should come back from resume in 30-row mode, shouldn't we?
Well, current state of video resume is "we are happy to see anything at all".
Quoted 11 lines
HW info
Using vga=0xf07, default8x16 font, display has 30 lines
On powerup from S3 console has only 25 lines but still scrolls at 30 lines. Setfont historically fixes it.
Tested with 2.6.10, 2.6.11-rc1: OK
Tested with 2.6.11-rc2-Vanilla and 2.6.11-rc[234]+swsusp2.
When using setfont, screen goes blank. Power up after S3
returns console in 25 lines mode with 30 lines scroll. Several attempts - same result.So... screen goes blank even when suspend is not involved, right? Sounds like a bug to me ;-).
Quoted 5 lines
Another bug I see only on this HW and only with 2.6 is that
when - and only when - using gentoo emerge --usepackage in
text console, scroll area resets to _25_ when portage "dumps" the (binary) package contents which scrolls pretty fast. I was unable to reproduce this in any other way. Tried also echo loop in bash but perhaps it is too slow or not random enough. Note that 2.4.2[789] no problem.
Quoted 5 lines
Well, dumping random stuff to console can produce funny results. I'd call that normal. Try cat
/dev/urandom, that should be "enough random".Pavel
I am also getting strange effects. I boot into 2.6.11-rc4 and the console fonts looks fine. Come back a day later and the console font has
corrupt characters. E.g. Displays a "D" instead of an "L" and stuff
like that. It is mostly readable, except for a few characters. It is only the local console that is corrupted. ssh into the box displays correct characters, so all I can assume is that the VGA console is being programmed with different characters. The bad characters also survive a soft reboot( During BIOS boot up), until the linux kernel starts booting, and then it switches to a good font.
Hi!
Quoted 4 lines
Quoted 3 lines
Well, dumping random stuff to console can produce funny results. I'd call that normal. Try cat
/dev/urandom, that should be "enough random".
Quoted 9 lines
I am also getting strange effects. I boot into 2.6.11-rc4 and the console fonts looks fine. Come back a day later and the console font has
corrupt characters. E.g. Displays a "D" instead of an "L" and stuff
like that. It is mostly readable, except for a few characters. It is only the local console that is corrupted. ssh into the box displays correct characters, so all I can assume is that the VGA console is being programmed with different characters. The bad characters also survive a soft reboot( During BIOS boot up), until the linux kernel starts booting, and then it switches to a good font.
I have seen something similar on S3 cards with bad video ram (we had
Quoted 1 line
3 of them). If it survives soft reboot... well, that looks like
hardware problem to me. [We may do something bad in linux, too, but strange effects should not survive reboot, that's hw bug. I'd suggest memtest on video ram, but someone would need to write that tool, first].
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!