geodefb: Add Geode framebuffer driver
PATCH 5/7 geodefb: Add Geode framebuffer driver
Attached is a patch (against 2.6.10) for a framebuffer driver for the Geode family of processors. It does not use AMD's horrible Durango API.
It is, however, rather feature incomplete at the moment.
* Only Geode GX1 (with CS5530 companion chip) is supported.
* Tested resolutions: 640x480 to 1280x1024.
* Supported bit depths: 8 bit palette, 16 bit RGB 5-6-5.
* CRT output only.
* No accelerated features.
* Compression is not enabled.
* flat panel support (panel=<x>x<y> option). (Only one 640x480 panel has been tested though.)
* blank function for display blanking/powersaving.
* crt=<n> option to enable/disable the CRT output.
---
Kconfig | 2 Makefile | 1 geode/Kconfig | 29 ++++ geode/Makefile | 5 geode/display_gx1.c | 213 ++++++++++++++++++++++++++++++ geode/display_gx1.h | 154 +++++++++++++++++++++ geode/geodefb.h | 39 +++++ geode/gx1fb_core.c | 359 +++++++++++++++++++++++++++++++++++++++++++++++++++ geode/video_cs5530.c | 194 +++++++++++++++++++++++++++ geode/video_cs5530.h | 75 ++++++++++ 10 files changed, 1071 insertions(+)
drivers/video/Kconfig +2 -0
@@ -1179,6 +1179,8 @@ bool "Au1100 LCD Driver" depends on FB && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y +source "drivers/video/geode/Kconfig" + config FB_SBUS bool "SBUS and UPA framebuffers" depends on FB && (SPARC32 || SPARC64)
drivers/video/Makefile +1 -0
@@ -36,6 +36,7 @@ obj-$(CONFIG_FB_SIS) += sis/ obj-$(CONFIG_FB_KYRO) += kyro/ obj-$(CONFIG_FB_SAVAGE) += savage/ +obj-$(CONFIG_FB_GEODE) += geode/ obj-$(CONFIG_FB_I810) += vgastate.o obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o
drivers/video/geode/Kconfig new file +29 -0
@@ -0,0 +1,29 @@ +# +# Geode family framebuffer configuration +# +config FB_GEODE + bool "AMD Geode family framebuffer support (EXPERIMENTAL)" + default n + depends on FB && EXPERIMENTAL + ---help--- + Say 'Y' here to allow you to select framebuffer drivers for + the AMD Geode family of processors. + +config FB_GEODE_GX1 + tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)" + default n + depends on FB_GEODE && EXPERIMENTAL + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR + ---help--- + Framebuffer driver for the display controller integrated into the + AMD Geode GX1 processor. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called gx1fb. If you want to compile it as a module, + say M here and read <file:Documentation/modules.txt>. + + If unsure, say N.
drivers/video/geode/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# Makefile for the Geode family framebuffer drivers + +obj-$(CONFIG_FB_GEODE_GX1) += gx1fb.o + +gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
drivers/video/geode/display_gx1.c new file +213 -0
213 lines not on this page · raw message
drivers/video/geode/display_gx1.h new file +154 -0
154 lines not on this page · raw message
drivers/video/geode/geodefb.h new file +39 -0
@@ -0,0 +1,39 @@ +/* +* drivers/video/geode/geodefb.h +* -- Geode framebuffer driver +* +* Copyright (C) 2005 Arcom Control Systems Ltd. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +*/ +#ifndef __GEODEFB_H__ +#define __GEODEFB_H__ + +struct geodefb_info ; + +struct geode_dc_ops { +void (*set_mode)(struct fb_info *); +void (*set_palette_reg)(struct fb_info *,unsigned ,unsigned ,unsigned ,unsigned ); +}; + +struct geode_vid_ops { +void (*set_dclk)(struct fb_info *); +void (*configure_display)(struct fb_info *); +int (*blank_display)(struct fb_info *,int blank_mode); +}; + +struct geodefb_par { +int enable_crt; +int panel_x;/* dimensions of an attached flat panel, non-zero => enable panel */ +int panel_y; +struct pci_dev *vid_dev; +void __iomem *dc_regs; +void __iomem *vid_regs; +struct geode_dc_ops *dc_ops; +struct geode_vid_ops *vid_ops; +}; + +#endif /* !__GEODEFB_H__ */
drivers/video/geode/gx1fb_core.c new file +359 -0
359 lines not on this page · raw message
drivers/video/geode/video_cs5530.c new file +194 -0
194 lines not on this page · raw message
drivers/video/geode/video_cs5530.h new file +75 -0
75 lines not on this page · raw message
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click