Random UDP port assignment for rpc.statd
Subsystems (2)
Why isn't it possible to specify all of statd's listening ports using the -p flag? It works for the TCP port and one of the UDP ports, but there is always one more listening UDP port that is randomly assigned. I googled around for information on this problem, and came up with this Debian bug report:
http://www.mail-archive.com/[email protected]/msg11985.html
The thread ends with "I think we may have a real bug", but this was reported in 1.0.6, and the problem still persists in 1.0.7, so I was wondering if this isn't a bug after all.
Btw, there's also a similar problem with nfsd: In addition to the standard listening port at 2049, it always opens a random port in the high port range (32000-32768 or something like that).
In case it matters: I'm using Linux 2.6.10 and Slackware 10.1.
Signature · 11 lines
Haakon ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
su den 20.02.2005 Klokka 12:13 (+0100) skreiv Haakon Riiser:
Quoted 11 lines
Why isn't it possible to specify all of statd's listening ports using the -p flag? It works for the TCP port and one of the UDP ports, but there is always one more listening UDP port that is randomly assigned. I googled around for information on this problem, and came up with this Debian bug report:
http://www.mail-archive.com/[email protected]/msg11985.html
The thread ends with "I think we may have a real bug", but this was reported in 1.0.6, and the problem still persists in 1.0.7, so I was wondering if this isn't a bug after all.
rpc.statd needs some ports for communication with the portmapper and the lockd manager on the loopback net, and this is probably what you are seeing. There should be nothing that needs to be allowed firewall access, though.
Cheers,
Trond
Signature · 12 lines
Trond Myklebust <[email protected]> ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
[Trond Myklebust]
Quoted 11 lines
su den 20.02.2005 Klokka 12:13 (+0100) skreiv Haakon Riiser:
Quoted 4 lines
Why isn't it possible to specify all of statd's listening ports using the -p flag? It works for the TCP port and one of the UDP ports, but there is always one more listening UDP port that is randomly assigned. [...]
rpc.statd needs some ports for communication with the portmapper and the lockd manager on the loopback net, and this is probably what you are seeing. There should be nothing that needs to be allowed firewall access, though.
Actually, I wanted to /block/ this port in the firewall, not open for external access. My firewall allows everything by default, and has rules to block ports that shouldn't be visible to the world. Should I be concerned about this port being unblocked?
Signature · 11 lines
Haakon ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
su den 20.02.2005 Klokka 15:10 (+0100) skreiv Haakon Riiser:
Quoted 9 lines
Quoted 4 lines
rpc.statd needs some ports for communication with the portmapper and the lockd manager on the loopback net, and this is probably what you are seeing. There should be nothing that needs to be allowed firewall access, though.
Actually, I wanted to /block/ this port in the firewall, not open for external access. My firewall allows everything by default, and has rules to block ports that shouldn't be visible to the world. Should I be concerned about this port being unblocked?
The ports for portmapper registration are destroyed after they are used. The only port that is of worry is the one used for outgoing communications (controlled by the "-o" option).
.... and of course, that control mechanism appears to be borken...
See if the attached patch doesn't fix things so that your 3rd rpc.statd port stays on the port specified by "-o"...
Cheers,
Trond
Signature · 1 line
Trond Myklebust <[email protected]>
Ehem...
1) sin.sin_port is supposed to be in network order.
2) bindresvport() is used to automatically choose the port for you. if you want to set the port yourself, use bind()
--- rmtcall.c | 12 ++++++++++-- 1 files changed, 10 insertions(+), 2 deletions(-)
utils/statd/rmtcall.c +10 -2
@@ -65,7 +65,7 @@ statd_get_socket(int port)memset (&sin,0 ,sizeof (sin)); sin.sin_family =AF_INET ; - sin.sin_port = port; + sin.sin_addr.s_addr =INADDR_ANY ;/* * If a local hostname is given (-n option to statd), bind to the address * specified. This is required to support clients that ignore the mon_name in
@@ -76,7 +76,15 @@ statd_get_socket(int port)if (hp) sin.sin_addr = *(struct in_addr *) hp->h_addr; } -if (bindresvport (sockfd, &sin) <0 ) { +if (port !=0 ) { + sin.sin_port =htons (port); +if (bind (sockfd, &sin,sizeof (sin)) <0 ) { +note (N_CRIT ,"failed to bind to outgoing port, %d\n" +"falling back to randomly chosen port\n" , port); + port =0 ; + } + } +if (port ==0 &&bindresvport (sockfd, &sin) <0 ) {dprintf (N_WARNING ,"process_hosts: can't bind to reserved port\n" ); }
su den 20.02.2005 Klokka 10:30 (-0500) skreiv Trond Myklebust:
Quoted 2 lines
See if the attached patch doesn't fix things so that your 3rd rpc.statd port stays on the port specified by "-o"...
Here is the same patch in a slightly cleaner version (it gets rid of the redundant comparison)...
Neil, could you please apply to the main nfs-utils tree?
Cheers,
Trond
Signature · 1 line
Trond Myklebust <[email protected]>
Ehem...
1) sin.sin_port is supposed to be in network order.
2) bindresvport() is used to automatically choose the port for you. if you want to set the port yourself, use bind()
--- rmtcall.c | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-)
utils/statd/rmtcall.c +9 -2
@@ -65,7 +65,7 @@ statd_get_socket(int port)memset (&sin,0 ,sizeof (sin)); sin.sin_family =AF_INET ; - sin.sin_port = port; + sin.sin_addr.s_addr =INADDR_ANY ;/* * If a local hostname is given (-n option to statd), bind to the address * specified. This is required to support clients that ignore the mon_name in
@@ -76,11 +76,18 @@ statd_get_socket(int port)if (hp) sin.sin_addr = *(struct in_addr *) hp->h_addr; } +if (port !=0 ) { + sin.sin_port =htons (port); +if (bind (sockfd, &sin,sizeof (sin)) ==0 ) + goto out_success; +note (N_CRIT ,"statd: failed to bind to outgoing port, %d\n" +" falling back on randomly chosen port\n" , port); + }if (bindresvport (sockfd, &sin) <0 ) {dprintf (N_WARNING ,"process_hosts: can't bind to reserved port\n" ); } - +out_success:return sockfd; }
[Trond Myklebust]
Quoted 7 lines
su den 20.02.2005 Klokka 10:30 (-0500) skreiv Trond Myklebust:
Quoted 2 lines
See if the attached patch doesn't fix things so that your 3rd rpc.statd port stays on the port specified by "-o"...
Here is the same patch in a slightly cleaner version (it gets rid of the redundant comparison)...
Works great -- thanks for fixing this so quickly!
Signature · 11 lines
Haakon ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 3 lines
Btw, there's also a similar problem with nfsd: In addition to the standard listening port at 2049, it always opens a random port in the high port range (32000-32768 or something like that).
I almost forgot this one. Does nfsd's mystery UDP port have the same purpose as the one from statd, i.e. communication with the portmapper?
Signature · 11 lines
Haakon ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
su den 20.02.2005 Klokka 18:21 (+0100) skreiv Haakon Riiser:
Quoted 7 lines
Quoted 3 lines
Btw, there's also a similar problem with nfsd: In addition to the standard listening port at 2049, it always opens a random port in the high port range (32000-32768 or something like that).
I almost forgot this one. Does nfsd's mystery UDP port have the same purpose as the one from statd, i.e. communication with the portmapper?
Which nfsd? knfsd or the userland server?
The nfsd also needs to register with the portmapper, but again, that should close immediately after use. There should be no UDP ports kept open other than 2049.
The lockd daemon needs an extra port, but you can control that (and this control mechanism _should_ work) using the pseudofiles
in /proc/sys/fs/nfs, or the kernel parameters lockd.udpport and lockd.tcpport.
Cheers,
Trond
Signature · 12 lines
Trond Myklebust <[email protected]> ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
[Trond Myklebust]
Quoted 11 lines
su den 20.02.2005 Klokka 18:21 (+0100) skreiv Haakon Riiser:
Quoted 3 lines
I almost forgot this one. Does nfsd's mystery UDP port have the same purpose as the one from statd, i.e. communication with the portmapper?
[...]
The lockd daemon needs an extra port, but you can control that (and this control mechanism _should_ work) using the pseudofiles in/proc/sys/fs/nfs, or the kernel parameters lockd.udpport and lockd.tcpport.
Thanks, this works when I prefix udpport and tcpport with "nlm_". But I see you already know that: :-)
http://www.ussg.iu.edu/hypermail/linux/kernel/0403.3/1915.html
Signature · 11 lines
Haakon ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ NFS maillist - [email protected] https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 9 lines · On Sunday February 20, [email protected] wrote:
su den 20.02.2005 Klokka 10:30 (-0500) skreiv Trond Myklebust:
Quoted 2 lines
See if the attached patch doesn't fix things so that your 3rd rpc.statd port stays on the port specified by "-o"...
Here is the same patch in a slightly cleaner version (it gets rid of the redundant comparison)...
Neil, could you please apply to the main nfs-utils tree?
Done. Thanks.
NeilBrown
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 12 lines
Why isn't it possible to specify all of statd's listening ports using the -p flag? It works for the TCP port and one of the UDP ports, but there is always one more listening UDP port that is randomly assigned. I googled around for information on this problem, and came up with this Debian bug report:
http://www.mail-archive.com/[email protected]/msg11985.html
The thread ends with "I think we may have a real bug", but this was reported in 1.0.6, and the problem still persists in 1.0.7, so I was wondering if this isn't a bug after all.
Quoted 5 lines
Btw, there's also a similar problem with nfsd: In addition to the standard listening port at 2049, it always opens a random port in the high port range (32000-32768 or something like that).
In case it matters: I'm using Linux 2.6.10 and Slackware 10.1.
All that matters is "rpcinfo -p". As you can see, i managed to get everything on a specifig port:
# rpcinfo -p
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 30002 status
100024 1 tcp 30002 status
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100021 1 udp 30004 nlockmgr
100021 3 udp 30004 nlockmgr
100021 4 udp 30004 nlockmgr
100005 1 udp 30001 mountd
100005 1 tcp 30001 mountd
100005 2 udp 30001 mountd
100005 2 tcp 30001 mountd
100005 3 udp 30001 mountd
100005 3 tcp 30001 mountdYou can ok any other port in your firewall.
You may want to have those two lines in your /etc/sysctl.conf:
fs.nfs.nlm_udpport=30004
fs.nfs.nlm_tcpport=30004
I still have problems with rquotad though. It doesn't to be possible to set that on a static port.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Do linux' NFS daemons use a dynamically linked (libc?) library function or functions to get their port numbers mapped to something more or less random?
If so, it might be possible (and interesting) to create an LD_PRELOAD'able teensy .so that would replace this/these function(s) with something that knows how to hardcode a port from a table under /etc or something, and falls back on the traditional method of port allocation otherwise.
Quoted 59 lines · Sven Köhler
Quoted 12 lines
Why isn't it possible to specify all of statd's listening ports using the -p flag? It works for the TCP port and one of the UDP ports, but there is always one more listening UDP port that is randomly assigned. I googled around for information on this problem, and came up with this Debian bug report:
http://www.mail-archive.com/[email protected]/msg11985.html
The thread ends with "I think we may have a real bug", but this was reported in 1.0.6, and the problem still persists in 1.0.7, so I was wondering if this isn't a bug after all.
Quoted 5 lines
Btw, there's also a similar problem with nfsd: In addition to the standard listening port at 2049, it always opens a random port in the high port range (32000-32768 or something like that).
In case it matters: I'm using Linux 2.6.10 and Slackware 10.1.
All that matters is "rpcinfo -p". As you can see, i managed to get everything on a specifig port:
# rpcinfo -p Program Vers Proto Port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 30002 status 100024 1 tcp 30002 status 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100021 1 udp 30004 nlockmgr 100021 3 udp 30004 nlockmgr 100021 4 udp 30004 nlockmgr 100005 1 udp 30001 mountd 100005 1 tcp 30001 mountd 100005 2 udp 30001 mountd 100005 2 tcp 30001 mountd 100005 3 udp 30001 mountd 100005 3 tcp 30001 mountdYou can ok any other port in your firewall.
You may want to have those two lines in your
/etc/sysctl.conf:fs.nfs.nlm_udpport=30004 fs.nfs.nlm_tcpport=30004I still have problems with rquotad though. It doesn't to be possible to set that on a static port.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs