(3/3) cpufreq_ondemand - 03_sys_freq_step.diff
PATCH 1/1 (3/3) cpufreq_ondemand - 03_sys_freq_step.diff
Adds support so that the cpufreq change stepping is no longer fixed at 5% and can be changed dynamically by the user
Signature · 11 lines
_________________________________________
/ It is wise to keep in mind that neither \
| success nor failure is ever final. |
| |
\ -- Roger Babson /
-----------------------------------------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||drivers/cpufreq/cpufreq_ondemand.c +36 -6
@@ -80,6 +80,7 @@unsigned int up_threshold;unsigned int down_threshold;unsigned int ignore_nice; +unsigned int freq_step; };static struct dbs_tuners dbs_tuners_ins = {
@@ -118,6 +119,7 @@show_one (up_threshold, up_threshold);show_one (down_threshold, down_threshold);show_one (ignore_nice, ignore_nice); +show_one (freq_step, freq_step);static ssize_t store_sampling_down_factor (struct cpufreq_policy *unused,const char *buf,size_t count)
@@ -236,6 +238,29 @@return count; } +static ssize_t store_freq_step (struct cpufreq_policy *policy, +const char *buf,size_t count) +{ +unsigned int input; +int ret; + + ret =sscanf (buf,"%u" , &input); + +if ( ret !=1 ) +return -EINVAL ; + +if ( input >100 ) + input =100 ; + +/* no need to test here if freq_step is zero as the user might actually +* want this, they would be crazy though :) */ +down (&dbs_sem); + dbs_tuners_ins.freq_step = input; +up (&dbs_sem); + +return count; +} +#define define_one_rw (_name) \ static struct freq_attr _name = \ __ATTR(_name, 0644, show_##_name, store_##_name)
@@ -245,6 +270,7 @@define_one_rw (up_threshold);define_one_rw (down_threshold);define_one_rw (ignore_nice); +define_one_rw (freq_step);static struct attribute * dbs_attributes[] = { &sampling_rate_max.attr,
@@ -254,6 +280,7 @@ &up_threshold.attr, &down_threshold.attr, &ignore_nice.attr, + &freq_step.attr, NULL };
@@ -292,7 +319,7 @@* * Any frequency increase takes it to the maximum frequency. * Frequency reduction happens at minimum steps of -* 5% of max_frequency +* 5% (default) of max_frequency */ /* Check for frequency increase */
@@ -391,18 +418,20 @@sampling_rate_in_HZ (freq_down_sampling_rate);if (idle_ticks > down_idle_ticks ) { -/* if we are already at the lowest speed then break out early */ -if (policy->cur == policy->min) +/* if we are already at the lowest speed then break out early +* or if we 'cannot' reduce the speed as the user might want +* freq_step to be zero */ +if (policy->cur == policy->min || dbs_tuners_ins.freq_step ==0 )return ; - - freq_down_step = (5 * policy->max) /100 ; + + freq_down_step = (dbs_tuners_ins.freq_step * policy->max) /100 ;/* max freq cannot be less than 100. But who knows.... */ if (unlikely (freq_down_step ==0 )) freq_down_step =5 ;__cpufreq_driver_target (policy, - policy->cur - freq_down_step, + policy->cur - freq_down_step,CPUFREQ_RELATION_H );return ; }
@@ -488,6 +517,7 @@DEF_SAMPLING_RATE_LATENCY_MULTIPLIER ; dbs_tuners_ins.sampling_rate = def_sampling_rate; dbs_tuners_ins.ignore_nice =0 ; + dbs_tuners_ins.freq_step =5 ;dbs_timer_init (); }
_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq
Quoted 3 lines · Alexander Clouter
Adds support so that the cpufreq change stepping is no longer fixed at 5% and can be changed dynamically by the user
The cpufreq core will step to the next available frequency (in both direction). So I failed to see the usefullness for this one.
Signature · 4 lines
Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care.
Quoted 7 lines · Bruno Ducrot
Quoted 3 lines · Alexander Clouter
Adds support so that the cpufreq change stepping is no longer fixed at 5% and can be changed dynamically by the user
The cpufreq core will step to the next available frequency (in both direction). So I failed to see the usefullness for this one.
If the load is going down, this tunable defines in what frequency steps the "target" frequency is decreased -- _then_ the cpufreq core determines which frequency close to the target is actually supported by the hardware.
Thanks,
Dominik