Skip to contentSkip to conversation

Wake-on-LAN/PCI Linux support

DISCUSSION Piotr Rzezniczak 1 participant 1 message Feb 20, 2005

lore
Share & tools
lore
#0 lore raw
Quoted 5 lines

Does Linux currently support Wake-on-LAN/PCI? I have a 3Com 3c905 TX-M NIC which supports wake-on-LAN and wake-on-PCI. On Windows XP, I have configured the system so that I can use "ether-wake" to wake up mysystem from standby/hibernation remotely through the network.

(cut)

Quoted 4 lines

However, when I shut down linux by using "init 0", the system gets totally shut down, including the NIC. The switch port for the NIC shows the card is not mantaining the link and thus, "ether-wake" is totally useless.

I found the following solution for the same problem:
- use standard 3c59x driver from kernel sources (even for 3c90x cards)
- load this driver as a kernel module
- add the following entry in /etc/modules:
---- cut ----
3c59x options=0x408
---- cut ----

Wake-on-lan works properly now with 3com 905cx-tx-m card (3c905c) on my Debian 3.1 (unstable) and 2.6.10 kernel

greetings
Piotr (djv) Rzezniczak