generate error when trying to compile PCMCIA driver without 64 bit addresses
PATCH 1/1 generate error when trying to compile PCMCIA driver without 64 bit addresses
Greetings!
PCMCIA controller registers are mapped in an area that requires the upper four of the 36 bit addresses, so this can't work without 64 bit physical address support. Sick thing is that due to some stupid casts the whole thing compiles without warnings even without 64 bit support but of course doesn't run. However, that's a topic for a different patch.
Uli
Changes:
* generate error when compiled without 64bit physical address support
---
Index: drivers/pcmcia/au1000_generic.h
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/au1000_generic.h,v retrieving revision 1.4
pcmcia/au1000_generic.h 23 Feb 2005 08:40:05 -0000 renamed from pcmcia/au1000_generic.h 19 Oct 2004 07:26:37 -0000 1.4 +4 -0
@@ -30,6 +30,10 @@ #include <pcmcia/cistpl.h> #include "cs_internal.h" +#if !defined(CONFIG_64BIT_PHYS_ADDR) +# error "need 64bit physical address support to access PCMCIA controller" +#endif + #define AU1000_PCMCIA_POLL_PERIOD (2*HZ) #define AU1000_PCMCIA_IO_SPEED (255) #define AU1000_PCMCIA_MEM_SPEED (300)
pcmcia/au1000_generic.h 23 Feb 2005 08:40:05 -0000 line 39
Quoted 13 lines · Ulrich Eckhardt
PCMCIA controller registers are mapped in an area that requires the upper four of the 36 bit addresses, so this can't work without 64 bit physical address support. Sick thing is that due to some stupid casts the whole thing compiles without warnings even without 64 bit support but of course doesn't run. However, that's a topic for a different patch.
pcmcia/au1000_generic.h 23 Feb 2005 08:40:05 -0000 renamed from pcmcia/au1000_generic.h 19 Oct 2004 07:26:37 -0000 1.4 +4
-0+#if !defined(CONFIG_64BIT_PHYS_ADDR) +# error "need 64bit physical address support to access PCMCIA controller" +#endif + #define AU1000_PCMCIA_POLL_PERIOD (2*HZ) #define AU1000_PCMCIA_IO_SPEED (255) #define AU1000_PCMCIA_MEM_SPEED (300)
No. In drivers/pcmcia/Kconfig do something like:
config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
select 64BIT_PHYS_ADDR
depends on SOC_AU1X00 && PCMCIA
Ralf