Skip to contentSkip to conversation

usbnet not being loaded in 2.6.11-rc4/5

DISCUSSION Holger Klawitter 1 participant 1 message Feb 27, 2005

lore
Share & tools
lore
#0 lore raw

Hi there,

After updrading the kernel from 2.6.10 to 2.6.11-rc4 (also tried rc5) the usbnet module is not being loaded when the Sharp Zaurus C860 (Sharp ROM) is being plugged in at usb. It used to work fine in 2.6.10.

- I tried 4 different machines (all i386) all the same result (Chipsets were "Intel ICH5","Intel ICH4","Intel 82801BA" and "ALI USB 1.1 r3 (Acer)")

- All systems were i386, Debian unstable (sid) using hotplug and udev.

- The Zaurus itself is being correctly identified in all systems.

- The kernel settings did not change across 2.6.10 vs. 2.6.11 (upgrade by patch) ALl systems were booting into the same rootfs (no initrd)

- Manual loading of usbnet does not bring "usb0" into existance either.

- Other USB devices (I tried usb_storage, pl2303) had no problems with 2.6.11.

- Enabling DEBUG in hotplug reveals the message
"... no modules for USB product 4dd/9031/0"

- The modules.usbmap entries in 2.6.10 and 2.6.11 are both the same with one
exception: the bInterfaceSubClass is 0x0a in 2.6.10 but 0x06 in 2.6.11

What's broken there? (From glacing at usbnet.c it almost looks like Zaurus has been blacklisted, however then I don't grok why it's still in the config and the modules.usbmap).

Regards
Holger Klawitter (not subscribed)