Skip to contentSkip to conversation

Compilation fixes for Ebony, Luan and Ocotea

PATCH New Gerhard Jaeger 1 participant 1 message Feb 28, 2005

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Compilation fixes for Ebony, Luan and Ocotea

Hi,

this patch fixes the problem, that the current kernel (linux-2.6.11-rc5) could not be compiled, when "support for early boot texts over serial port" (CONFIG_SERIAL_TEXT_DEBUG=y) is active.

arch/ppc/platforms/4xx/ebony.h renamed from arch/ppc/platforms/4xx/ebony.h.orig +2 -2
@@ -61,8 +61,8 @@
  */
 
 /* OpenBIOS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE	(u8 *) 0xE0000200
-#define UART1_IO_BASE	(u8 *) 0xE0000300
+#define UART0_IO_BASE	0xE0000200
+#define UART1_IO_BASE	0xE0000300
 
 /* external Epson SG-615P */
 #define BASE_BAUD	691200
arch/ppc/platforms/4xx/luan.h renamed from arch/ppc/platforms/4xx/luan.h.orig +3 -3
@@ -47,9 +47,9 @@
 #define RS_TABLE_SIZE	3
 
 /* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE	(u8 *) 0xa0000200
-#define UART1_IO_BASE	(u8 *) 0xa0000300
-#define UART2_IO_BASE	(u8 *) 0xa0000600
+#define UART0_IO_BASE	0xa0000200
+#define UART1_IO_BASE	0xa0000300
+#define UART2_IO_BASE	0xa0000600
 
 #define BASE_BAUD	11059200
 #define STD_UART_OP(num)					\
arch/ppc/platforms/4xx/ocotea.h renamed from arch/ppc/platforms/4xx/ocotea.h.orig +2 -2
@@ -56,8 +56,8 @@
 #define RS_TABLE_SIZE	2
 
 /* OpenBIOS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE	(u8 *) 0xE0000200
-#define UART1_IO_BASE	(u8 *) 0xE0000300
+#define UART0_IO_BASE	0xE0000200
+#define UART1_IO_BASE	0xE0000300
 
 #define BASE_BAUD	11059200/16
 #define STD_UART_OP(num)					\