Problem with PPPD on dialup with 2.6.11-bk1 and later; 2.6.11 is OK
Quoted 5 lines · Today at 04:57:37 pm, I wrote:
Earlier today, I reported "PPPD fails on recent 2.6.11-bk". I've narrowed the problem down to between 2.6.11 and 2.6.11-bk1.
I get this with 2.6.11-bk1: (two attempts)
Quoted 7 lines
Mar 9 16:34:32 spc pppd[1142]: pppd 2.4.1 started by steven, uid 501 Mar 9 16:34:32 spc pppd[1142]: Using interface ppp0 Mar 9 16:34:32 spc pppd[1142]: Connect: ppp0 <--> /dev/ttyS1 Mar 9 16:34:56 spc pppd[1142]: Hangup (SIGHUP) Mar 9 16:34:56 spc pppd[1142]: Modem hangup Mar 9 16:34:56 spc pppd[1142]: Connection terminated. Mar 9 16:34:56 spc pppd[1142]: Exit.
Searching lkml archive, I found:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111031501416334&w=2
I also found that reverting that patch made the problem go away for 2.6.11-bk1.
The bookmarkable link for this changeset is here:
http://linus.bkbits.net:8080/linux-2.5/cset@4228d0d83vitxwMSdjDcnjt90uXocg?nav=index.html|ChangeSet@-8w
Stephen Hemminger also wrote: (Someting's busted with serial in 2.6.11 latest)
Quoted 3 lines
Some checkin since 2.6.11 has caused the serial driver to drop characters. Console output is chopped and messages are garbled. Even the shell prompt gets truncated.
Hope this helps,
Steven
Quoted 9 lines
Stephen Hemminger also wrote: (Someting's busted with serial in 2.6.11 latest)
Quoted 3 lines
Some checkin since 2.6.11 has caused the serial driver to drop characters. Console output is chopped and messages are garbled. Even the shell prompt gets truncated.
Searching lkml archive, I found:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111031501416334&w=2I also found that reverting that patch made the problem go away for 2.6.11-bk1.
Yes, this patch is the problem. A fix showed up today. Current kernels work fine, thanks.
Quoted 10 lines · Stephen Hemminger
Quoted 10 lines
Stephen Hemminger also wrote: (Someting's busted with serial in 2.6.11 latest)
Quoted 3 lines
Some checkin since 2.6.11 has caused the serial driver to drop characters. Console output is chopped and messages are garbled. Even the shell prompt gets truncated.
Searching lkml archive, I found:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111031501416334&w=2
Quoted 6 lines
Quoted 1 line
I also found that reverting that patch made the problem go away for 2.6.11-bk1.
Yes, this patch is the problem. A fix showed up today. Current kernels work fine, thanks.
Could someone who has the patch broken out send it to -stable? Serial not working is a non-trivial issue given the number of people who use dialup either full time or as a fallback connection.
Signature · 3 lines
-bill davidsen ([email protected]) "The secret to procrastination is to put things off until the last possible moment - but no longer" -me
Quoted 15 lines · Bill Davidsen
Quoted 14 lines · Stephen Hemminger
Quoted 11 lines
Stephen Hemminger also wrote: (Someting's busted with serial in 2.6.11 latest)
Quoted 3 lines
Some checkin since 2.6.11 has caused the serial driver to drop characters. Console output is chopped and messages are garbled. Even the shell prompt gets truncated.
Searching lkml archive, I found:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111031501416334&w=2I also found that reverting that patch made the problem go away for 2.6.11-bk1.
Quoted 7 lines
Quoted 2 lines
Yes, this patch is the problem. A fix showed up today. Current kernels work fine, thanks.
Could someone who has the patch broken out send it to -stable? Serial not working is a non-trivial issue given the number of people who use dialup either full time or as a fallback connection.
Since the breakage which this fix is for didn't appear until after 2.6.11, a patch to 2.6.11.x is not required.
Steven