Skip to contentSkip to conversation

s3c2410 watchdog power management

PATCH New Ben Dooks 1 participant 1 message Mar 12, 2005

Subsystems (2)
lore
Share & tools
lore

Ben Dooks

author
#0 lore raw

PATCH 1/1 s3c2410 watchdog power management

Patch from Dimitry Andric <[email protected]>, updated by Ben Dooks <[email protected]>. Patch is against 2.6.11-mm2

Add power management support to the s3c2410 watchdog, so that it is shut-down over suspend, and re-initialised on resume.

Also add Dimitry to the list of authors.

drivers/char/watchdog/s3c2410_wdt.c +46 -2
diff -urN -X ../dontdiff linux-2.6.11-mm2/drivers/char/watchdog/s3c2410_wdt.c linux-2.6.11-mm2-bjd1/drivers/char/watchdog/s3c2410_wdt.c
@@ -26,6 +26,7 @@
  *	05-Oct-2004	BJD	Added semaphore init to stop crashes on open
  *				Fixed tmr_count / wdt_count confusion
  *				Added configurable debug
+ *	25-Jan-2005	DA	Added suspend/resume support
 */
 
 #include <linux/module.h>
@@ -484,15 +485,57 @@
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
+static unsigned long wtcon_save;
+static unsigned long wtdat_save;
+
+static int s3c2410wdt_suspend(struct device *dev, u32 state, u32 level)
+{
+	if (level == SUSPEND_POWER_DOWN) {
+		/* Save watchdog state, and turn it off. */
+		wtcon_save = readl(wdt_base + S3C2410_WTCON);
+		wtdat_save = readl(wdt_base + S3C2410_WTDAT);
+
+		/* Note that WTCNT doesn't need to be saved. */
+		s3c2410wdt_stop();
+	}
+
+	return 0;
+}
+
+static int s3c2410wdt_resume(struct device *dev, u32 level)
+{
+	if (level == RESUME_POWER_ON) {
+		/* Restore watchdog state. */
+
+		writel(wtdat_save, wdt_base + S3C2410_WTDAT);
+		writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
+		writel(wtcon_save, wdt_base + S3C2410_WTCON);
+
+		printk(KERN_INFO PFX "watchdog %sabled\n",
+		       (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
+	}
+
+	return 0;
+}
+
+#else
+#define s3c2410wdt_suspend NULL
+#define s3c2410wdt_resume  NULL
+#endif /* CONFIG_PM */
+
+
 static struct device_driver s3c2410wdt_driver = {
 	.name		= "s3c2410-wdt",
 	.bus		= &platform_bus_type,
 	.probe		= s3c2410wdt_probe,
 	.remove		= s3c2410wdt_remove,
+	.suspend	= s3c2410wdt_suspend,
+	.resume		= s3c2410wdt_resume,
 };
 
 
-
 static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
 
 static int __init watchdog_init(void)
@@ -510,7 +553,8 @@
 module_init(watchdog_init);
 module_exit(watchdog_exit);
 
-MODULE_AUTHOR("Ben Dooks <[email protected]>");
+MODULE_AUTHOR("Ben Dooks <[email protected]>, "
+	      "Dimitry Andric <[email protected]>");
 MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
drivers/char/watchdog/s3c2410_wdt.c +46 -2

74 lines not on this page · raw message