Skip to contentSkip to conversation

problem mounting using NFSv4 when using -o sec=krb5 option

DISCUSSION mehta kiran 4 participants 11 messages Mar 17, 2005 – Mar 21, 2005

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi kevin ,
I am using RHEL4 GA.
kernel : 2.6.9-5.EL
nfs-utils : nfs-utils-1.0.6-46

As per what you told , i have added entries on both client and server.

*client:vcslinux6#klist -k /etc/krb5.keytab
2 nfs/[email protected]

*server:vcslinux5#klist -k /etc/krb5.keytab

2 nfs/[email protected]

*kdc:vcslinux1#klist -k /etc/krb5.keytab

2 root/[email protected]
2 nfs/[email protected] 3 nfs/[email protected] 2 nfs/[email protected]

I inserted rpcsec_gss_krb5 module on all machines. started krb5kdc and kadmind.
started all nfs daemons , rpc.svcgssd , rpc.idmapd on server and exported filesystem with proper options.

started rpc.idmapd on client(vcslinux6).
But when i run #rpc.gssd -m -v -f

Mar 17 11:13:03 vcslinux6 kernel: RPC: AUTH_GSS upcall
timed out.
Mar 17 11:13:03 vcslinux6 kernel: Please check user

daemon is running!

in log file:
Using keytab file '/etc/krb5.keytab'
WARNING: Decrypt integrity check failed while getting initial ticket for principal 'nfs/[email protected]' from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained processing client list

-------
Then i tried making kvno for vcslinux5 (on kdc) = 2 i could not.
[root@vcslinux1 ~]# kadmin
Authenticating as principal root/[email protected] with password. Password for root/[email protected]:
kadmin: modprinc -kvno 2 nfs/vcslinux5.vxindia.veritas.com
Principal "nfs/[email protected]" modified.
kadmin: ktadd -e des-cbc-crc:normal -k /tmp/keytab nfs/[email protected] Entry for principal nfs/[email protected] with kvno 3, encryption type DES cbc mode with CRC-32 added to keytab WRFILE:/tmp/keytab.

Please let me know where i went wrong .

Quoted 9 lines · --- Kevin Coffman

Also, "failed reading uid from krb5 upcall" and "Failed to write error
downcall" should not normally happen. What versions of kernel and
nfs-utils do you have?

Quoted 2 lines
Quoted 2 lines

Error in log file on mount

Mar 16 14:58:43 vcslinux5 rpc.gssd[4258]:
Quoted 10 lines

WARNING:

Quoted 1 line
Quoted 1 line

failed reading uid from krb5 upcall pipe:

Success

Quoted 1 line
Quoted 1 line
Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING: Key

Quoted 1 line
Quoted 1 line

table entry not found while getting initial

ticket for

Quoted 2 lines
Quoted 2 lines

principal

'nfs/[email protected]'

Quoted 10 lines
Quoted 2 lines
Quoted 2 lines

from keytab 'FILE:/etc/krb5.keytab'

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]: ERROR:

No

Quoted 2 lines
Quoted 2 lines

usable machine credentials obtained

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING:

Quoted 1 line
Quoted 1 line

Failed to obtain machine credentials for

connection to

Quoted 2 lines
Quoted 2 lines

server vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:
Quoted 15 lines

WARNING:

Quoted 1 line
Quoted 1 line

Failed to create krb5 context for user with uid

0 with

Quoted 3 lines
Quoted 3 lines

any credentials cache for server
vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]: Failed

to

Quoted 4 lines
Quoted 4 lines

write error downcall!

thanks,
--kiran

-------------------------------------------------------

Quoted 6 lines

SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 4 lines

_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

__________________________________
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#1 lore raw

Hi Kiran,

Try running rpc.gssd -f -vvv (really verbose and foreground) and rpc.svcgssd -vvv -f
and see why it is failing. I has similar problems with NFSv4, before updating all my packages (currently available in CITI website).

Possibly the path of libgssapi_krb5.so may not be proper. Check your /etc/gssapi_mech.conf

Basically after installation of all packages, you need to create 2 principals in kdc server; one for server and one for client and extract them appropriately.
Make sure all three machines are in Timesync and hostname of them are resolvable. Run rpc.mountd, rpc.idmapd, rpc.svcgssd and rpc.nfsd in server and rpc.idmapd and rpc.gssd in client.

HTH
Suresh

Quoted 143 lines · mehta kiran

Hi kevin ,
I am using RHEL4 GA.
kernel : 2.6.9-5.EL
nfs-utils : nfs-utils-1.0.6-46

As per what you told , i have added entries on both client and server.

*client:vcslinux6#klist -k /etc/krb5.keytab
2 nfs/[email protected]

*server:vcslinux5#klist -k /etc/krb5.keytab

2 nfs/[email protected]

*kdc:vcslinux1#klist -k /etc/krb5.keytab

2 root/[email protected]
2 nfs/[email protected] 3 nfs/[email protected] 2 nfs/[email protected]

I inserted rpcsec_gss_krb5 module on all machines. started krb5kdc and kadmind.
started all nfs daemons , rpc.svcgssd , rpc.idmapd on server and exported filesystem with proper options.

started rpc.idmapd on client(vcslinux6).
But when i run #rpc.gssd -m -v -f

Mar 17 11:13:03 vcslinux6 kernel: RPC: AUTH_GSS upcall
timed out.
Mar 17 11:13:03 vcslinux6 kernel: Please check user

daemon is running!

in log file:
Using keytab file '/etc/krb5.keytab'
WARNING: Decrypt integrity check failed while getting initial ticket for principal 'nfs/[email protected]' from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained processing client list

-------
Then i tried making kvno for vcslinux5 (on kdc) = 2 i could not.
[root@vcslinux1 ~]# kadmin
Authenticating as principal root/[email protected] with password. Password for root/[email protected]:
kadmin: modprinc -kvno 2 nfs/vcslinux5.vxindia.veritas.com
Principal "nfs/[email protected]" modified.
kadmin: ktadd -e des-cbc-crc:normal -k /tmp/keytab nfs/[email protected] Entry for principal nfs/[email protected] with kvno 3, encryption type DES cbc mode with CRC-32 added to keytab WRFILE:/tmp/keytab.

Please let me know where i went wrong .

Quoted 9 lines · --- Kevin Coffman

Also, "failed reading uid from krb5 upcall" and "Failed to write error
downcall" should not normally happen. What versions of kernel and
nfs-utils do you have?

Quoted 2 lines
Quoted 2 lines

Error in log file on mount

Mar 16 14:58:43 vcslinux5 rpc.gssd[4258]:
Quoted 10 lines

WARNING:

Quoted 1 line
Quoted 1 line

failed reading uid from krb5 upcall pipe:

Success

Quoted 1 line
Quoted 1 line
Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING: Key

Quoted 1 line
Quoted 1 line

table entry not found while getting initial

ticket for

Quoted 2 lines
Quoted 2 lines

principal

'nfs/[email protected]'

Quoted 10 lines
Quoted 2 lines
Quoted 2 lines

from keytab 'FILE:/etc/krb5.keytab'

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]: ERROR:

No

Quoted 2 lines
Quoted 2 lines

usable machine credentials obtained

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING:

Quoted 1 line
Quoted 1 line

Failed to obtain machine credentials for

connection to

Quoted 2 lines
Quoted 2 lines

server vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:
Quoted 15 lines

WARNING:

Quoted 1 line
Quoted 1 line

Failed to create krb5 context for user with uid

0 with

Quoted 3 lines
Quoted 3 lines

any credentials cache for server
vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]: Failed

to

Quoted 4 lines
Quoted 4 lines

write error downcall!

thanks,
--kiran

-------------------------------------------------------

Quoted 6 lines

SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 4 lines

_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

__________________________________
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

Signature · 11 lines
"Good Luck is when preparation meets opportunity"


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist  -  [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
#2 lore raw

Hi Suresh ,
#rpc.gssd -f -vvv show the same output. #rpc.svcgssd -f -vvv gives
WARNING: unable to locate function krb5_gss_internal_release_oid in krb5 mechanism library: there will be problems if multiple mechanisms are used! entering poll

/etc/gssmech.conf file has entry

/usr/lib/libgssapi_krb5.so mechglue_internal_krb5_init

and this library exists in /usr/lib
All machines are in TimeSync.

thanks,
--kiran

Quoted 32 lines · --- Suresh Jayaram

Hi Kiran,

Try running rpc.gssd -f -vvv (really verbose and
foreground) and
rpc.svcgssd -vvv -f
and see why it is failing. I has similar problems
with NFSv4, before
updating all my packages (currently available in
CITI website).

Possibly the path of libgssapi_krb5.so may not be
proper. Check your
/etc/gssapi_mech.conf

Basically after installation of all packages, you need to create 2
principals in kdc server; one for server and one for client and
extract them appropriately.
Make sure all three machines are in Timesync and hostname of them are
resolvable. Run rpc.mountd, rpc.idmapd, rpc.svcgssd and rpc.nfsd in
server and rpc.idmapd and rpc.gssd in client.

HTH
Suresh

On Thu, 17 Mar 2005 03:59:52 -0800 (PST), mehta
kiran
<[email protected]> wrote:

Quoted 13 lines
Quoted 6 lines

Hi kevin ,
I am using RHEL4 GA.
kernel : 2.6.9-5.EL
nfs-utils : nfs-utils-1.0.6-46

As per what you told , i have added entries on

both

Quoted 5 lines

client and server.

*client:vcslinux6#klist -k /etc/krb5.keytab
2

nfs/[email protected]

Quoted 6 lines
Quoted 5 lines

*server:vcslinux5#klist -k /etc/krb5.keytab

2

nfs/[email protected]

Quoted 7 lines
Quoted 6 lines

*kdc:vcslinux1#klist -k /etc/krb5.keytab

2 root/[email protected]
2

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

3

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

2

nfs/[email protected]

Quoted 14 lines
Quoted 4 lines

I inserted rpcsec_gss_krb5 module on all machines. started krb5kdc and kadmind.
started all nfs daemons , rpc.svcgssd ,

rpc.idmapd on

Quoted 1 line

server and exported filesystem with proper

options.

Quoted 4 lines

started rpc.idmapd on client(vcslinux6).
But when i run #rpc.gssd -m -v -f

Mar 17 11:13:03 vcslinux6 kernel: RPC: AUTH_GSS

upcall

Quoted 2 lines

timed out.

Mar 17 11:13:03 vcslinux6 kernel: Please check
Quoted 10 lines

user

Quoted 5 lines

daemon is running!

in log file:
Using keytab file '/etc/krb5.keytab'
WARNING: Decrypt integrity check failed while

getting

Quoted 2 lines

initial ticket for principal

'nfs/[email protected]'

Quoted 4 lines
Quoted 4 lines

from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained
processing client list

Quoted 13 lines
Quoted 2 lines

-------
Then i tried making kvno for vcslinux5 (on kdc) =

2

Quoted 9 lines

i could not.
[root@vcslinux1 ~]# kadmin
Authenticating as principal
root/[email protected] with password.
Password for root/[email protected]:
kadmin: modprinc -kvno 2
nfs/vcslinux5.vxindia.veritas.com
Principal

"nfs/[email protected]"

Quoted 5 lines
Quoted 2 lines

modified.
kadmin: ktadd -e des-cbc-crc:normal -k

/tmp/keytab

Quoted 1 line

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

Entry for principal

nfs/[email protected]

Quoted 4 lines
Quoted 1 line

with kvno 3, encryption type DES cbc mode with

CRC-32

Quoted 2 lines

added to keytab WRFILE:/tmp/keytab.

Quoted 25 lines
Quoted 6 lines

Please let me know where i went wrong .

Quoted 3 lines · --- Kevin Coffman

Also, "failed reading uid from krb5 upcall" and "Failed to write error
downcall" should not normally happen. What

versions

Quoted 17 lines
Quoted 16 lines

of kernel and
nfs-utils do you have?

Quoted 2 lines
Quoted 2 lines

Error in log file on mount

Mar 16 14:58:43 vcslinux5 rpc.gssd[4258]:

WARNING:

Quoted 1 line
Quoted 1 line

failed reading uid from krb5 upcall pipe:

Success

Quoted 1 line
Quoted 1 line
Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING: Key

Quoted 1 line
Quoted 1 line

table entry not found while getting initial

ticket for

Quoted 2 lines
Quoted 2 lines

principal

'nfs/[email protected]'

Quoted 11 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

from keytab 'FILE:/etc/krb5.keytab'

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

ERROR:

Quoted 8 lines
Quoted 8 lines

No

Quoted 2 lines
Quoted 2 lines

usable machine credentials obtained

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING:

Quoted 1 line
Quoted 1 line

Failed to obtain machine credentials for

connection to

Quoted 2 lines
Quoted 2 lines

server vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:
Quoted 19 lines
Quoted 2 lines
Quoted 2 lines

WARNING:

Quoted 1 line
Quoted 1 line

Failed to create krb5 context for user with

uid

Quoted 4 lines
Quoted 4 lines

0 with

Quoted 3 lines
Quoted 3 lines

any credentials cache for server
vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:

Failed

Quoted 10 lines
Quoted 9 lines

to

Quoted 4 lines
Quoted 4 lines

write error downcall!

thanks,
--kiran

-------------------------------------------------------

Quoted 9 lines
Quoted 4 lines
Quoted 4 lines

SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the

hype.

Quoted 3 lines
Quoted 2 lines

Start reading now.

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 5 lines
Quoted 5 lines
Quoted 4 lines

_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

Quoted 9 lines
Quoted 3 lines

__________________________________
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn

more.

Quoted 4 lines

http://info.mail.yahoo.com/mail_250

-------------------------------------------------------

Quoted 7 lines
Quoted 2 lines

SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT

Products from real users.

Quoted 1 line

Discover which products truly live up to the hype.

Start reading now.

Quoted 1 line

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 1 line

=== message truncated ===

__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#3 lore raw
In reply to Suresh Jayaram

one more thing.

On machine running kdc ,

entry for vcslinux5 is with kvno 3
while entry for vcslinux5 on vcslinux5 is with kvno 2 . Is this making a difference

thanks,
--kiran

Quoted 32 lines · --- Suresh Jayaram

Hi Kiran,

Try running rpc.gssd -f -vvv (really verbose and
foreground) and
rpc.svcgssd -vvv -f
and see why it is failing. I has similar problems
with NFSv4, before
updating all my packages (currently available in
CITI website).

Possibly the path of libgssapi_krb5.so may not be
proper. Check your
/etc/gssapi_mech.conf

Basically after installation of all packages, you need to create 2
principals in kdc server; one for server and one for client and
extract them appropriately.
Make sure all three machines are in Timesync and hostname of them are
resolvable. Run rpc.mountd, rpc.idmapd, rpc.svcgssd and rpc.nfsd in
server and rpc.idmapd and rpc.gssd in client.

HTH
Suresh

On Thu, 17 Mar 2005 03:59:52 -0800 (PST), mehta
kiran
<[email protected]> wrote:

Quoted 13 lines
Quoted 6 lines

Hi kevin ,
I am using RHEL4 GA.
kernel : 2.6.9-5.EL
nfs-utils : nfs-utils-1.0.6-46

As per what you told , i have added entries on

both

Quoted 5 lines

client and server.

*client:vcslinux6#klist -k /etc/krb5.keytab
2

nfs/[email protected]

Quoted 6 lines
Quoted 5 lines

*server:vcslinux5#klist -k /etc/krb5.keytab

2

nfs/[email protected]

Quoted 7 lines
Quoted 6 lines

*kdc:vcslinux1#klist -k /etc/krb5.keytab

2 root/[email protected]
2

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

3

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

2

nfs/[email protected]

Quoted 14 lines
Quoted 4 lines

I inserted rpcsec_gss_krb5 module on all machines. started krb5kdc and kadmind.
started all nfs daemons , rpc.svcgssd ,

rpc.idmapd on

Quoted 1 line

server and exported filesystem with proper

options.

Quoted 4 lines

started rpc.idmapd on client(vcslinux6).
But when i run #rpc.gssd -m -v -f

Mar 17 11:13:03 vcslinux6 kernel: RPC: AUTH_GSS

upcall

Quoted 2 lines

timed out.

Mar 17 11:13:03 vcslinux6 kernel: Please check
Quoted 10 lines

user

Quoted 5 lines

daemon is running!

in log file:
Using keytab file '/etc/krb5.keytab'
WARNING: Decrypt integrity check failed while

getting

Quoted 2 lines

initial ticket for principal

'nfs/[email protected]'

Quoted 4 lines
Quoted 4 lines

from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained
processing client list

Quoted 13 lines
Quoted 2 lines

-------
Then i tried making kvno for vcslinux5 (on kdc) =

2

Quoted 9 lines

i could not.
[root@vcslinux1 ~]# kadmin
Authenticating as principal
root/[email protected] with password.
Password for root/[email protected]:
kadmin: modprinc -kvno 2
nfs/vcslinux5.vxindia.veritas.com
Principal

"nfs/[email protected]"

Quoted 5 lines
Quoted 2 lines

modified.
kadmin: ktadd -e des-cbc-crc:normal -k

/tmp/keytab

Quoted 1 line

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

Entry for principal

nfs/[email protected]

Quoted 4 lines
Quoted 1 line

with kvno 3, encryption type DES cbc mode with

CRC-32

Quoted 2 lines

added to keytab WRFILE:/tmp/keytab.

Quoted 25 lines
Quoted 6 lines

Please let me know where i went wrong .

Quoted 3 lines · --- Kevin Coffman

Also, "failed reading uid from krb5 upcall" and "Failed to write error
downcall" should not normally happen. What

versions

Quoted 17 lines
Quoted 16 lines

of kernel and
nfs-utils do you have?

Quoted 2 lines
Quoted 2 lines

Error in log file on mount

Mar 16 14:58:43 vcslinux5 rpc.gssd[4258]:

WARNING:

Quoted 1 line
Quoted 1 line

failed reading uid from krb5 upcall pipe:

Success

Quoted 1 line
Quoted 1 line
Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING: Key

Quoted 1 line
Quoted 1 line

table entry not found while getting initial

ticket for

Quoted 2 lines
Quoted 2 lines

principal

'nfs/[email protected]'

Quoted 11 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

from keytab 'FILE:/etc/krb5.keytab'

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

ERROR:

Quoted 8 lines
Quoted 8 lines

No

Quoted 2 lines
Quoted 2 lines

usable machine credentials obtained

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING:

Quoted 1 line
Quoted 1 line

Failed to obtain machine credentials for

connection to

Quoted 2 lines
Quoted 2 lines

server vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:
Quoted 19 lines
Quoted 2 lines
Quoted 2 lines

WARNING:

Quoted 1 line
Quoted 1 line

Failed to create krb5 context for user with

uid

Quoted 4 lines
Quoted 4 lines

0 with

Quoted 3 lines
Quoted 3 lines

any credentials cache for server
vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:

Failed

Quoted 10 lines
Quoted 9 lines

to

Quoted 4 lines
Quoted 4 lines

write error downcall!

thanks,
--kiran

-------------------------------------------------------

Quoted 9 lines
Quoted 4 lines
Quoted 4 lines

SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the

hype.

Quoted 3 lines
Quoted 2 lines

Start reading now.

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 5 lines
Quoted 5 lines
Quoted 4 lines

_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

Quoted 9 lines
Quoted 3 lines

__________________________________
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn

more.

Quoted 4 lines

http://info.mail.yahoo.com/mail_250

-------------------------------------------------------

Quoted 7 lines
Quoted 2 lines

SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT

Products from real users.

Quoted 1 line

Discover which products truly live up to the hype.

Start reading now.

Quoted 1 line

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 1 line

=== message truncated ===

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#4 lore raw

Hi Kiran,

Run rpc.gssd also in verbose mode

Quoted 1 line
Quoted 1 line

RPC: AUTH_GSS upcall timed out.

This means rpc.gssd is not running.
Check gssapi_mech.conf in client machine also.
Those Warning messages you can ignore..

Update your libgssapi and librpcsecgss packages (libgssapi-0.2 and librpcsecgss-0.4)

HTH
Suresh

Quoted 238 lines · mehta kiran

one more thing.

On machine running kdc ,

entry for vcslinux5 is with kvno 3
while entry for vcslinux5 on vcslinux5 is with kvno 2 . Is this making a difference

thanks,
--kiran

Quoted 32 lines · --- Suresh Jayaram

Hi Kiran,

Try running rpc.gssd -f -vvv (really verbose and
foreground) and
rpc.svcgssd -vvv -f
and see why it is failing. I has similar problems
with NFSv4, before
updating all my packages (currently available in
CITI website).

Possibly the path of libgssapi_krb5.so may not be
proper. Check your
/etc/gssapi_mech.conf

Basically after installation of all packages, you need to create 2
principals in kdc server; one for server and one for client and
extract them appropriately.
Make sure all three machines are in Timesync and hostname of them are
resolvable. Run rpc.mountd, rpc.idmapd, rpc.svcgssd and rpc.nfsd in
server and rpc.idmapd and rpc.gssd in client.

HTH
Suresh

On Thu, 17 Mar 2005 03:59:52 -0800 (PST), mehta
kiran
<[email protected]> wrote:

Quoted 13 lines
Quoted 6 lines

Hi kevin ,
I am using RHEL4 GA.
kernel : 2.6.9-5.EL
nfs-utils : nfs-utils-1.0.6-46

As per what you told , i have added entries on

both

Quoted 5 lines

client and server.

*client:vcslinux6#klist -k /etc/krb5.keytab
2

nfs/[email protected]

Quoted 6 lines
Quoted 5 lines

*server:vcslinux5#klist -k /etc/krb5.keytab

2

nfs/[email protected]

Quoted 7 lines
Quoted 6 lines

*kdc:vcslinux1#klist -k /etc/krb5.keytab

2 root/[email protected]
2

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

3

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

2

nfs/[email protected]

Quoted 14 lines
Quoted 4 lines

I inserted rpcsec_gss_krb5 module on all machines. started krb5kdc and kadmind.
started all nfs daemons , rpc.svcgssd ,

rpc.idmapd on

Quoted 1 line

server and exported filesystem with proper

options.

Quoted 4 lines

started rpc.idmapd on client(vcslinux6).
But when i run #rpc.gssd -m -v -f

Mar 17 11:13:03 vcslinux6 kernel: RPC: AUTH_GSS

upcall

Quoted 2 lines

timed out.

Mar 17 11:13:03 vcslinux6 kernel: Please check
Quoted 10 lines

user

Quoted 5 lines

daemon is running!

in log file:
Using keytab file '/etc/krb5.keytab'
WARNING: Decrypt integrity check failed while

getting

Quoted 2 lines

initial ticket for principal

'nfs/[email protected]'

Quoted 4 lines
Quoted 4 lines

from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained
processing client list

Quoted 13 lines
Quoted 2 lines

-------
Then i tried making kvno for vcslinux5 (on kdc) =

2

Quoted 9 lines

i could not.
[root@vcslinux1 ~]# kadmin
Authenticating as principal
root/[email protected] with password.
Password for root/[email protected]:
kadmin: modprinc -kvno 2
nfs/vcslinux5.vxindia.veritas.com
Principal

"nfs/[email protected]"

Quoted 5 lines
Quoted 2 lines

modified.
kadmin: ktadd -e des-cbc-crc:normal -k

/tmp/keytab

Quoted 1 line

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

Entry for principal

nfs/[email protected]

Quoted 4 lines
Quoted 1 line

with kvno 3, encryption type DES cbc mode with

CRC-32

Quoted 2 lines

added to keytab WRFILE:/tmp/keytab.

Quoted 25 lines
Quoted 6 lines

Please let me know where i went wrong .

Quoted 3 lines · --- Kevin Coffman

Also, "failed reading uid from krb5 upcall" and "Failed to write error
downcall" should not normally happen. What

versions

Quoted 17 lines
Quoted 16 lines

of kernel and
nfs-utils do you have?

Quoted 2 lines
Quoted 2 lines

Error in log file on mount

Mar 16 14:58:43 vcslinux5 rpc.gssd[4258]:

WARNING:

Quoted 1 line
Quoted 1 line

failed reading uid from krb5 upcall pipe:

Success

Quoted 1 line
Quoted 1 line
Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING: Key

Quoted 1 line
Quoted 1 line

table entry not found while getting initial

ticket for

Quoted 2 lines
Quoted 2 lines

principal

'nfs/[email protected]'

Quoted 11 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

from keytab 'FILE:/etc/krb5.keytab'

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

ERROR:

Quoted 8 lines
Quoted 8 lines

No

Quoted 2 lines
Quoted 2 lines

usable machine credentials obtained

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING:

Quoted 1 line
Quoted 1 line

Failed to obtain machine credentials for

connection to

Quoted 2 lines
Quoted 2 lines

server vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:
Quoted 19 lines
Quoted 2 lines
Quoted 2 lines

WARNING:

Quoted 1 line
Quoted 1 line

Failed to create krb5 context for user with

uid

Quoted 4 lines
Quoted 4 lines

0 with

Quoted 3 lines
Quoted 3 lines

any credentials cache for server
vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:

Failed

Quoted 10 lines
Quoted 9 lines

to

Quoted 4 lines
Quoted 4 lines

write error downcall!

thanks,
--kiran

-------------------------------------------------------

Quoted 9 lines
Quoted 4 lines
Quoted 4 lines

SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the

hype.

Quoted 3 lines
Quoted 2 lines

Start reading now.

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 5 lines
Quoted 5 lines
Quoted 4 lines

_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

Quoted 9 lines
Quoted 3 lines

__________________________________
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn

more.

Quoted 4 lines

http://info.mail.yahoo.com/mail_250

-------------------------------------------------------

Quoted 7 lines
Quoted 2 lines

SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT

Products from real users.

Quoted 1 line

Discover which products truly live up to the hype.

Start reading now.

Quoted 1 line

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 1 line

=== message truncated ===

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Signature · 11 lines
"Good Luck is when preparation meets opportunity"


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist  -  [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
#5 lore raw

Hi ,
I tried with new library.
libgssapi-0.2 and librpcsecgss-0.4 got installed in /usr/local/lib.

Entry in /etc/gssapi_mech.conf has entry as
/usr/lib/libgssapi_krb5.so mechglue_internal_krb5_init

Still i get error while starting rpc.gssd

[root@vcslinux6 ~]# rpc.gssd -f -vvv
Using keytab file '/etc/krb5.keytab' Processing keytab entry for principal 'nfs/[email protected]' We will use this entry (nfs/[email protected])
WARNING: Decrypt integrity check failed while getting initial ticket for principal 'nfs/[email protected]' from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained processing client list

and while mouting it says:
rpc.gssd may not be running...

May be i am going wrong in procedure of adding
entries in keytab.

Steps.

On machine runnnig KDC:
1.create database using kbd5_util create -s. 2.using "kadmin.local" interface
addprinc root/admin
ktadd -e des-cbc-crc:normal -k /tmp/keytab root/admin

addprinc nfs/vcslinux5.vxindia.veritas.com ktadd -e des-cbc-crc:normal -k /tmp/keytab nfs/vcslinux5.vxindia.veritas.com

addprinc nfs/vcslinux6.vxindia.veritas.com ktadd -e des-cbc-crc:normal -k /tmp/keytab nfs/vcslinux6.vxindia.veritas.com
3.At the end do cp /tmp/keytab /etc/krb5.keytab. 4.Output of klist -k /etc/krb5.keytab

2 root/[email protected]
2 nfs/[email protected] 2 nfs/[email protected]

Machine running nfs server(vcslinux5)

1.create database using kdb5_util create -s
2. using "kadmin.local" interace create
entry for nfs/vcslinux5.vxindia.veritas.com
3.output of klist -k /etc/krb5.keytab

2 nfs/[email protected]

Similarly on machine running nfs client(vcslinux6) after making entry using kadmin.local interface for it
output of klist -k /etc/krb5.keytab

2 nfs/[email protected]

On "all" the machine , /etc/krb.conf
has foloowing entries for realms and domain_realms [realms]
VXINDIA.VERITAS.COM = {
kdc = vcslinux1.vxindia.veritas.com:88 admin_server = vcslinux1.vxindia.veritas.com:749 default_domain = vxindia.veritas.com
}

[domain_realm]
.vxindia.veritas.com = VXINDIA.VERITAS.COM
vxindia.veritas.com = VXINDIA.VERITAS.COM

Did i go wrong anywhere ?

--thanks,
--kiran

Quoted 54 lines · --- Suresh Jayaram

Hi Kiran,

Run rpc.gssd also in verbose mode

Quoted 1 line
Quoted 1 line

RPC: AUTH_GSS upcall timed out.

This means rpc.gssd is not running.
Check gssapi_mech.conf in client machine also.
Those Warning messages you can ignore..

Update your libgssapi and librpcsecgss packages
(libgssapi-0.2 and
librpcsecgss-0.4)

HTH
Suresh

Quoted 6 lines · mehta kiran

one more thing.

On machine running kdc ,

entry for vcslinux5 is with kvno 3
while entry for vcslinux5 on vcslinux5 is with

kvno

Quoted 6 lines

2 . Is this making a difference

thanks,
--kiran

--- Suresh Jayaram <[email protected]>

Quoted 7 lines · wrote:
Quoted 7 lines

Hi Kiran,

Try running rpc.gssd -f -vvv (really verbose and
foreground) and
rpc.svcgssd -vvv -f
and see why it is failing. I has similar

problems

Quoted 5 lines
Quoted 5 lines

with NFSv4, before
updating all my packages (currently available in
CITI website).

Possibly the path of libgssapi_krb5.so may not

be

Quoted 4 lines
Quoted 4 lines

proper. Check your
/etc/gssapi_mech.conf

Basically after installation of all packages,

you

Quoted 2 lines
Quoted 2 lines

need to create 2
principals in kdc server; one for server and one

Quoted 32 lines

for

Quoted 5 lines
Quoted 5 lines

client and
extract them appropriately.
Make sure all three machines are in Timesync and
hostname of them are
resolvable. Run rpc.mountd, rpc.idmapd,

rpc.svcgssd

Quoted 24 lines
Quoted 23 lines

and rpc.nfsd in
server and rpc.idmapd and rpc.gssd in client.

HTH
Suresh

Quoted 6 lines · mehta kiran

Hi kevin ,
I am using RHEL4 GA.
kernel : 2.6.9-5.EL
nfs-utils : nfs-utils-1.0.6-46

As per what you told , i have added entries on

both

Quoted 5 lines

client and server.

*client:vcslinux6#klist -k /etc/krb5.keytab 2

nfs/[email protected]

Quoted 8 lines
Quoted 7 lines
Quoted 6 lines
Quoted 5 lines

*server:vcslinux5#klist -k /etc/krb5.keytab

2

nfs/[email protected]

Quoted 9 lines
Quoted 8 lines
Quoted 7 lines
Quoted 6 lines

*kdc:vcslinux1#klist -k /etc/krb5.keytab

2 root/[email protected]
2

nfs/[email protected]

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

3

nfs/[email protected]

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

2

nfs/[email protected]

Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

I inserted rpcsec_gss_krb5 module on all

machines.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

started krb5kdc and kadmind. started all nfs daemons , rpc.svcgssd ,

Quoted 23 lines
Quoted 7 lines
Quoted 7 lines

rpc.idmapd on

Quoted 1 line

server and exported filesystem with proper

options.

Quoted 4 lines

started rpc.idmapd on client(vcslinux6). But when i run #rpc.gssd -m -v -f

Mar 17 11:13:03 vcslinux6 kernel: RPC:

AUTH_GSS

Quoted 14 lines
Quoted 13 lines

upcall

Quoted 2 lines

timed out.

Mar 17 11:13:03 vcslinux6 kernel: Please check

user

Quoted 5 lines

daemon is running!

in log file:
Using keytab file '/etc/krb5.keytab'
WARNING: Decrypt integrity check failed while

getting

Quoted 2 lines

initial ticket for principal

'nfs/[email protected]'

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained processing client list

Quoted 16 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

-------
Then i tried making kvno for vcslinux5 (on

kdc) =

Quoted 12 lines
Quoted 11 lines

2

Quoted 9 lines

i could not.
[root@vcslinux1 ~]# kadmin Authenticating as principal root/[email protected] with password. Password for root/[email protected]:
kadmin: modprinc -kvno 2 nfs/vcslinux5.vxindia.veritas.com Principal

"nfs/[email protected]"

Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

modified.
kadmin: ktadd -e des-cbc-crc:normal -k

/tmp/keytab

Quoted 1 line

nfs/[email protected]

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Entry for principal

nfs/[email protected]

Quoted 20 lines
Quoted 8 lines
Quoted 8 lines
Quoted 1 line

with kvno 3, encryption type DES cbc mode with

CRC-32

Quoted 6 lines

added to keytab WRFILE:/tmp/keytab.

Please let me know where i went wrong .

Quoted 1 line · --- Kevin Coffman

Also, "failed reading uid from krb5 upcall"

and

Quoted 9 lines
Quoted 9 lines
Quoted 2 lines
Quoted 2 lines

"Failed to write error
downcall" should not normally happen. What

versions

Quoted 6 lines
Quoted 6 lines

of kernel and
nfs-utils do you have?

Quoted 2 lines
Quoted 2 lines

Error in log file on mount

Mar 16 14:58:43 vcslinux5

rpc.gssd[4258]:

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

WARNING:

Quoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

failed reading uid from krb5 upcall

pipe:

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

Success

Quoted 1 line
Quoted 1 line
Mar 16 14:58:43 vcslinux5

rpc.gssd[4405]:

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

WARNING: Key

Quoted 1 line
Quoted 1 line

table entry not found while getting

initial

=== message truncated ===

__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#6 lore raw

to den 17.03.2005 Klokka 23:43 (-0800) skreiv mehta kiran:

Quoted 17 lines

On machine runnnig KDC:
1.create database using kbd5_util create -s. 2.using "kadmin.local" interface
addprinc root/admin
ktadd -e des-cbc-crc:normal -k /tmp/keytab root/admin

addprinc nfs/vcslinux5.vxindia.veritas.com ktadd -e des-cbc-crc:normal -k /tmp/keytab nfs/vcslinux5.vxindia.veritas.com

addprinc nfs/vcslinux6.vxindia.veritas.com ktadd -e des-cbc-crc:normal -k /tmp/keytab nfs/vcslinux6.vxindia.veritas.com
3.At the end do cp /tmp/keytab /etc/krb5.keytab. 4.Output of klist -k /etc/krb5.keytab

Quoted 6 lines

2 root/[email protected]
2 nfs/[email protected] 2 nfs/[email protected]

No. All you want to do is

On machine runnnig KDC:
1.create database using kbd5_util create -s.
2.using "kadmin.local" interface

addprinc root/admin

addprinc nfs/vcslinux5.vxindia.veritas.com
ktadd -e des-cbc-crc:normal -k /tmp/keytab.vclinux5 nfs/vcslinux5.vxindia.veritas.com

addprinc nfs/vcslinux6.vxindia.veritas.com
ktadd -e des-cbc-crc:normal -k /tmp/keytab.vcslinux6 nfs/vcslinux6.vxindia.veritas.com

Then copy /tmp/keytab.vclinux5 to /etc/krb5.keytab on vclinux5, copy /tmp/keytab.vclinux6 to /etc/krb5.keytab on vclinux6,... Then just delete /tmp/keytab.vclinux*

scp -p /tmp/keytab.vclinux5 vclinux5:/etc/krb5.keytab scp -p /tmp/keytab.vclinux6 vclinux6:/etc/krb5.keytab rm /tmp/keytab.vclinux5 /tmp/keytab.vclinux6

IOW:
- Since the KDC is the trusted server that authenticates your
credentials, you _must_ be using keytabs generated by the KDC on each client.
- The server does not need to have a copy of the keytab.
- The clients do no need to have a copy of any keytab entry other than
their own.

Your /etc/krb.conf really needs to be a /etc/krb5.conf, but otherwise, the entries in your mail looked OK.

Cheers,
Trond

Signature · 12 lines
Trond Myklebust <[email protected]>



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist  -  [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
#7 lore raw
In reply to mehta kiran

Kiran,
Sorry, I was away for a few days with bad connectivity.

Each time you run the "ktadd" command to create a keytab entry, the key version number (kvno) for that principal is updated. You cannot simply modify the kvno for a principal because the kvno is associated with the key. I'd advise throwing out the keytab on vcslinux5 and create a new keytab for that principal.

P.S. Here is what the ktadd command does:
- It generates a new random key value for the principal (with a new key version)
- It puts this new key into the Kerberos DB, replacing any previous key with a lower kvno
- It puts this new key into the keytab file that was specified

Therefore, each time you run ktadd, the old keytab entry becomes obsolete.

Quoted 241 lines

one more thing.

On machine running kdc ,

entry for vcslinux5 is with kvno 3
while entry for vcslinux5 on vcslinux5 is with kvno 2 . Is this making a difference

thanks,
--kiran

Quoted 32 lines · --- Suresh Jayaram

Hi Kiran,

Try running rpc.gssd -f -vvv (really verbose and
foreground) and
rpc.svcgssd -vvv -f
and see why it is failing. I has similar problems
with NFSv4, before
updating all my packages (currently available in
CITI website).

Possibly the path of libgssapi_krb5.so may not be
proper. Check your
/etc/gssapi_mech.conf

Basically after installation of all packages, you need to create 2
principals in kdc server; one for server and one for client and
extract them appropriately.
Make sure all three machines are in Timesync and hostname of them are
resolvable. Run rpc.mountd, rpc.idmapd, rpc.svcgssd and rpc.nfsd in
server and rpc.idmapd and rpc.gssd in client.

HTH
Suresh

On Thu, 17 Mar 2005 03:59:52 -0800 (PST), mehta
kiran
<[email protected]> wrote:

Quoted 13 lines
Quoted 6 lines

Hi kevin ,
I am using RHEL4 GA.
kernel : 2.6.9-5.EL
nfs-utils : nfs-utils-1.0.6-46

As per what you told , i have added entries on

both

Quoted 5 lines

client and server.

*client:vcslinux6#klist -k /etc/krb5.keytab
2

nfs/[email protected]

Quoted 6 lines
Quoted 5 lines

*server:vcslinux5#klist -k /etc/krb5.keytab

2

nfs/[email protected]

Quoted 7 lines
Quoted 6 lines

*kdc:vcslinux1#klist -k /etc/krb5.keytab

2 root/[email protected]
2

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

3

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

2

nfs/[email protected]

Quoted 14 lines
Quoted 4 lines

I inserted rpcsec_gss_krb5 module on all machines. started krb5kdc and kadmind.
started all nfs daemons , rpc.svcgssd ,

rpc.idmapd on

Quoted 1 line

server and exported filesystem with proper

options.

Quoted 4 lines

started rpc.idmapd on client(vcslinux6).
But when i run #rpc.gssd -m -v -f

Mar 17 11:13:03 vcslinux6 kernel: RPC: AUTH_GSS

upcall

Quoted 2 lines

timed out.

Mar 17 11:13:03 vcslinux6 kernel: Please check
Quoted 10 lines

user

Quoted 5 lines

daemon is running!

in log file:
Using keytab file '/etc/krb5.keytab'
WARNING: Decrypt integrity check failed while

getting

Quoted 2 lines

initial ticket for principal

'nfs/[email protected]'

Quoted 4 lines
Quoted 4 lines

from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained
processing client list

Quoted 13 lines
Quoted 2 lines

-------
Then i tried making kvno for vcslinux5 (on kdc) =

2

Quoted 9 lines

i could not.
[root@vcslinux1 ~]# kadmin
Authenticating as principal
root/[email protected] with password.
Password for root/[email protected]:
kadmin: modprinc -kvno 2
nfs/vcslinux5.vxindia.veritas.com
Principal

"nfs/[email protected]"

Quoted 5 lines
Quoted 2 lines

modified.
kadmin: ktadd -e des-cbc-crc:normal -k

/tmp/keytab

Quoted 1 line

nfs/[email protected]

Quoted 3 lines
Quoted 2 lines

Entry for principal

nfs/[email protected]

Quoted 4 lines
Quoted 1 line

with kvno 3, encryption type DES cbc mode with

CRC-32

Quoted 2 lines

added to keytab WRFILE:/tmp/keytab.

Quoted 25 lines
Quoted 6 lines

Please let me know where i went wrong .

Quoted 3 lines · --- Kevin Coffman

Also, "failed reading uid from krb5 upcall" and "Failed to write error
downcall" should not normally happen. What

versions

Quoted 17 lines
Quoted 16 lines

of kernel and
nfs-utils do you have?

Quoted 2 lines
Quoted 2 lines

Error in log file on mount

Mar 16 14:58:43 vcslinux5 rpc.gssd[4258]:

WARNING:

Quoted 1 line
Quoted 1 line

failed reading uid from krb5 upcall pipe:

Success

Quoted 1 line
Quoted 1 line
Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING: Key

Quoted 1 line
Quoted 1 line

table entry not found while getting initial

ticket for

Quoted 2 lines
Quoted 2 lines

principal

'nfs/[email protected]'

Quoted 11 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

from keytab 'FILE:/etc/krb5.keytab'

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

ERROR:

Quoted 8 lines
Quoted 8 lines

No

Quoted 2 lines
Quoted 2 lines

usable machine credentials obtained

Mar 16 14:58:43 vcslinux5 rpc.gssd[4405]:

WARNING:

Quoted 1 line
Quoted 1 line

Failed to obtain machine credentials for

connection to

Quoted 2 lines
Quoted 2 lines

server vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:
Quoted 19 lines
Quoted 2 lines
Quoted 2 lines

WARNING:

Quoted 1 line
Quoted 1 line

Failed to create krb5 context for user with

uid

Quoted 4 lines
Quoted 4 lines

0 with

Quoted 3 lines
Quoted 3 lines

any credentials cache for server
vcslinux1.vxindia.veritas.com

Mar 16 14:59:08 vcslinux5 rpc.gssd[2760]:

Failed

Quoted 10 lines
Quoted 9 lines

to

Quoted 4 lines
Quoted 4 lines

write error downcall!

thanks,
--kiran

-------------------------------------------------------

Quoted 9 lines
Quoted 4 lines
Quoted 4 lines

SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the

hype.

Quoted 3 lines
Quoted 2 lines

Start reading now.

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 5 lines
Quoted 5 lines
Quoted 4 lines

_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

Quoted 9 lines
Quoted 3 lines

__________________________________
Do you Yahoo!?
Yahoo! Mail - now with 250MB free storage. Learn

more.

Quoted 4 lines

http://info.mail.yahoo.com/mail_250

-------------------------------------------------------

Quoted 7 lines
Quoted 2 lines

SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT

Products from real users.

Quoted 1 line

Discover which products truly live up to the hype.

Start reading now.

Quoted 1 line

http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

Quoted 1 line

=== message truncated ===

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Quoted 8 lines

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#8 lore raw

Hi ,
I tried things as directed by Trond in
his previous mail and everything seemed to work fine initally. but when i rebooted system , it started giving error whenever i start rpc.gssd on client machine.
Error is :

[root@vcslinux6 ~]# Mar 21 14:47:27 vcslinux6 rpc.gssd[3487]: WARNING: Key table entry not found while getting initial ticket for principal 'nfs/[email protected]' from keytab 'FILE:/etc/krb5.keytab'

Mar 21 14:47:27 vcslinux6 rpc.gssd[3487]: ERROR: No

usable machine credentials obtained

while #klist -k /etc/krb5.keytab gives
2 nfs/[email protected]

I even tried by recreating kerberos database but in vain. I still get the same error.

I observed one more thing.
Whenver i create principal(other then root/admin) , passwords i enter for them during their creation are not accepted by kinit.

Please let me know where i went wrong.

--thanks,
--kiran

Quoted 66 lines · --- Kevin Coffman

Kiran,
Sorry, I was away for a few days with bad
connectivity.

Each time you run the "ktadd" command to create a keytab entry, the key
version number (kvno) for that principal is updated.
You cannot simply
modify the kvno for a principal because the kvno is associated with the
key. I'd advise throwing out the keytab on vcslinux5 and create a new
keytab for that principal.

P.S. Here is what the ktadd command does:
- It generates a new random key value for the principal (with a new key version)
- It puts this new key into the Kerberos DB, replacing
any previous key with a lower kvno
- It puts this new key into the keytab file that was specified

Therefore, each time you run ktadd, the old keytab entry
becomes obsolete.

Quoted 6 lines

one more thing.

On machine running kdc ,

entry for vcslinux5 is with kvno 3
while entry for vcslinux5 on vcslinux5 is with

kvno

Quoted 8 lines

2 . Is this making a difference

thanks,
--kiran

--- Suresh Jayaram <[email protected]>

Quoted 7 lines · wrote:
Quoted 7 lines

Hi Kiran,

Try running rpc.gssd -f -vvv (really verbose and
foreground) and
rpc.svcgssd -vvv -f
and see why it is failing. I has similar

problems

Quoted 5 lines
Quoted 5 lines

with NFSv4, before
updating all my packages (currently available in
CITI website).

Possibly the path of libgssapi_krb5.so may not

be

Quoted 4 lines
Quoted 4 lines

proper. Check your
/etc/gssapi_mech.conf

Basically after installation of all packages,

you

Quoted 2 lines
Quoted 2 lines

need to create 2
principals in kdc server; one for server and one

Quoted 32 lines

for

Quoted 5 lines
Quoted 5 lines

client and
extract them appropriately.
Make sure all three machines are in Timesync and
hostname of them are
resolvable. Run rpc.mountd, rpc.idmapd,

rpc.svcgssd

Quoted 24 lines
Quoted 23 lines

and rpc.nfsd in
server and rpc.idmapd and rpc.gssd in client.

HTH
Suresh

Quoted 6 lines · mehta kiran

Hi kevin ,
I am using RHEL4 GA.
kernel : 2.6.9-5.EL
nfs-utils : nfs-utils-1.0.6-46

As per what you told , i have added entries on

both

Quoted 5 lines

client and server.

*client:vcslinux6#klist -k /etc/krb5.keytab 2

nfs/[email protected]

Quoted 8 lines
Quoted 7 lines
Quoted 6 lines
Quoted 5 lines

*server:vcslinux5#klist -k /etc/krb5.keytab

2

nfs/[email protected]

Quoted 9 lines
Quoted 8 lines
Quoted 7 lines
Quoted 6 lines

*kdc:vcslinux1#klist -k /etc/krb5.keytab

2 root/[email protected]
2

nfs/[email protected]

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

3

nfs/[email protected]

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

2

nfs/[email protected]

Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

I inserted rpcsec_gss_krb5 module on all

machines.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

started krb5kdc and kadmind. started all nfs daemons , rpc.svcgssd ,

Quoted 23 lines
Quoted 7 lines
Quoted 7 lines

rpc.idmapd on

Quoted 1 line

server and exported filesystem with proper

options.

Quoted 4 lines

started rpc.idmapd on client(vcslinux6). But when i run #rpc.gssd -m -v -f

Mar 17 11:13:03 vcslinux6 kernel: RPC:

AUTH_GSS

Quoted 14 lines
Quoted 13 lines

upcall

Quoted 2 lines

timed out.

Mar 17 11:13:03 vcslinux6 kernel: Please check

user

Quoted 5 lines

daemon is running!

in log file:
Using keytab file '/etc/krb5.keytab'
WARNING: Decrypt integrity check failed while

getting

Quoted 2 lines

initial ticket for principal

'nfs/[email protected]'

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained processing client list

Quoted 16 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

-------
Then i tried making kvno for vcslinux5 (on

kdc) =

Quoted 12 lines
Quoted 11 lines

2

Quoted 9 lines

i could not.
[root@vcslinux1 ~]# kadmin Authenticating as principal root/[email protected] with password. Password for root/[email protected]:
kadmin: modprinc -kvno 2 nfs/vcslinux5.vxindia.veritas.com Principal

"nfs/[email protected]"

Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

modified.
kadmin: ktadd -e des-cbc-crc:normal -k

/tmp/keytab

Quoted 1 line

nfs/[email protected]

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Entry for principal

nfs/[email protected]

Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 1 line

with kvno 3, encryption type DES cbc mode with

CRC-32

Quoted 6 lines

added to keytab WRFILE:/tmp/keytab.

Please let me know where i went wrong .

Quoted 1 line · --- Kevin Coffman

Also, "failed reading uid from krb5 upcall"

and

Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines

"Failed to write error
downcall" should not normally happen. What

versions

Quoted 4 lines
Quoted 4 lines

of kernel and
nfs-utils do you have?

=== message truncated ===

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#9 lore raw
Quoted 14 lines

Hi ,
I tried things as directed by Trond in
his previous mail and everything seemed to work fine initally. but when i rebooted system , it started giving error whenever i start rpc.gssd on client machine.
Error is :

[root@vcslinux6 ~]# Mar 21 14:47:27 vcslinux6 rpc.gssd[3487]: WARNING: Key table entry not found while getting initial ticket for principal 'nfs/[email protected]' from keytab 'FILE:/etc/krb5.keytab'

Quoted 7 lines
Mar 21 14:47:27 vcslinux6 rpc.gssd[3487]: ERROR: No

usable machine credentials obtained

while #klist -k /etc/krb5.keytab gives
2 nfs/[email protected]

I'm confused by this, but I do not know what to look for.

Quoted 2 lines

I even tried by recreating kerberos database but in vain. I still get the same error.

If you recreated the Kerberos database, you need to create new principals and keytab files. Did you do this?

Quoted 4 lines

I observed one more thing.
Whenver i create principal(other then root/admin) , passwords i enter for them during their creation are not accepted by kinit.

This is also strange and _might_ be related. How are you creating the principals -- using kadmin or kadmin.local? Which principals are you referring to here?

Quoted 5 lines

Please let me know where i went wrong.

--thanks,
--kiran

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#10 lore raw
In reply to Kevin Coffman

Hi Kevin,
I tried things as directed by Trond in
his previous mail and everything seemed to work fine initally. but when i rebooted system , it started giving error whenever i start rpc.gssd on client machine.
Error is :

[root@vcslinux6 ~]# Mar 21 14:47:27 vcslinux6 rpc.gssd[3487]: WARNING: Key table entry not found while getting initial ticket for principal 'nfs/[email protected]' from keytab 'FILE:/etc/krb5.keytab'

Mar 21 14:47:27 vcslinux6 rpc.gssd[3487]: ERROR: No

usable machine credentials obtained

while #klist -k /etc/krb5.keytab gives
2 nfs/[email protected]

I even tried by recreating kerberos database but in vain. I still get the same error.

I observed one more thing.
Whenver i create principal(other then root/admin) , passwords i enter for them during their creation are not accepted by kinit.

Please let me know where i went wrong.

--thanks,
--kiran

Quoted 66 lines · --- Kevin Coffman

Kiran,
Sorry, I was away for a few days with bad
connectivity.

Each time you run the "ktadd" command to create a keytab entry, the key
version number (kvno) for that principal is updated.
You cannot simply
modify the kvno for a principal because the kvno is associated with the
key. I'd advise throwing out the keytab on vcslinux5 and create a new
keytab for that principal.

P.S. Here is what the ktadd command does:
- It generates a new random key value for the principal (with a new key version)
- It puts this new key into the Kerberos DB, replacing
any previous key with a lower kvno
- It puts this new key into the keytab file that was specified

Therefore, each time you run ktadd, the old keytab entry
becomes obsolete.

Quoted 6 lines

one more thing.

On machine running kdc ,

entry for vcslinux5 is with kvno 3
while entry for vcslinux5 on vcslinux5 is with

kvno

Quoted 8 lines

2 . Is this making a difference

thanks,
--kiran

--- Suresh Jayaram <[email protected]>

Quoted 7 lines · wrote:
Quoted 7 lines

Hi Kiran,

Try running rpc.gssd -f -vvv (really verbose and
foreground) and
rpc.svcgssd -vvv -f
and see why it is failing. I has similar

problems

Quoted 5 lines
Quoted 5 lines

with NFSv4, before
updating all my packages (currently available in
CITI website).

Possibly the path of libgssapi_krb5.so may not

be

Quoted 4 lines
Quoted 4 lines

proper. Check your
/etc/gssapi_mech.conf

Basically after installation of all packages,

you

Quoted 2 lines
Quoted 2 lines

need to create 2
principals in kdc server; one for server and one

Quoted 32 lines

for

Quoted 5 lines
Quoted 5 lines

client and
extract them appropriately.
Make sure all three machines are in Timesync and
hostname of them are
resolvable. Run rpc.mountd, rpc.idmapd,

rpc.svcgssd

Quoted 24 lines
Quoted 23 lines

and rpc.nfsd in
server and rpc.idmapd and rpc.gssd in client.

HTH
Suresh

Quoted 6 lines · mehta kiran

Hi kevin ,
I am using RHEL4 GA.
kernel : 2.6.9-5.EL
nfs-utils : nfs-utils-1.0.6-46

As per what you told , i have added entries on

both

Quoted 5 lines

client and server.

*client:vcslinux6#klist -k /etc/krb5.keytab 2

nfs/[email protected]

Quoted 8 lines
Quoted 7 lines
Quoted 6 lines
Quoted 5 lines

*server:vcslinux5#klist -k /etc/krb5.keytab

2

nfs/[email protected]

Quoted 9 lines
Quoted 8 lines
Quoted 7 lines
Quoted 6 lines

*kdc:vcslinux1#klist -k /etc/krb5.keytab

2 root/[email protected]
2

nfs/[email protected]

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

3

nfs/[email protected]

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

2

nfs/[email protected]

Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

I inserted rpcsec_gss_krb5 module on all

machines.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

started krb5kdc and kadmind. started all nfs daemons , rpc.svcgssd ,

Quoted 23 lines
Quoted 7 lines
Quoted 7 lines

rpc.idmapd on

Quoted 1 line

server and exported filesystem with proper

options.

Quoted 4 lines

started rpc.idmapd on client(vcslinux6). But when i run #rpc.gssd -m -v -f

Mar 17 11:13:03 vcslinux6 kernel: RPC:

AUTH_GSS

Quoted 14 lines
Quoted 13 lines

upcall

Quoted 2 lines

timed out.

Mar 17 11:13:03 vcslinux6 kernel: Please check

user

Quoted 5 lines

daemon is running!

in log file:
Using keytab file '/etc/krb5.keytab'
WARNING: Decrypt integrity check failed while

getting

Quoted 2 lines

initial ticket for principal

'nfs/[email protected]'

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

from keytab 'FILE:/etc/krb5.keytab'
ERROR: No usable machine credentials obtained processing client list

Quoted 16 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

-------
Then i tried making kvno for vcslinux5 (on

kdc) =

Quoted 12 lines
Quoted 11 lines

2

Quoted 9 lines

i could not.
[root@vcslinux1 ~]# kadmin Authenticating as principal root/[email protected] with password. Password for root/[email protected]:
kadmin: modprinc -kvno 2 nfs/vcslinux5.vxindia.veritas.com Principal

"nfs/[email protected]"

Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

modified.
kadmin: ktadd -e des-cbc-crc:normal -k

/tmp/keytab

Quoted 1 line

nfs/[email protected]

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Entry for principal

nfs/[email protected]

Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 1 line

with kvno 3, encryption type DES cbc mode with

CRC-32

Quoted 6 lines

added to keytab WRFILE:/tmp/keytab.

Please let me know where i went wrong .

Quoted 1 line · --- Kevin Coffman

Also, "failed reading uid from krb5 upcall"

and

Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines

"Failed to write error
downcall" should not normally happen. What

versions

Quoted 4 lines
Quoted 4 lines

of kernel and
nfs-utils do you have?

=== message truncated ===

__________________________________
Do you Yahoo!?
Yahoo! Mail - Find what you need with new enhanced search.
http://info.mail.yahoo.com/mail_250

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs