Skip to contentSkip to conversation

3c59x concerns on 2.4->2.6 update?

DISCUSSION Matthias Andree 2 participants 3 messages Mar 18, 2005 – Mar 19, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

I've recently upgraded a router which has three 3Com900C Tornado cards revisions 74 and 78 from Linux 2.4 to 2.6.

IIRC, Linux 2.4 allowed to report if the link beat was sensed to be 10 or 100 mbps, Linux 2.6 does not. One of these cards is attached to peculiar network gear and needs to be forced to 100baseTx-FD. I configured options=0x204 for that interface, which sorta worked; vortex-diag and mii-diag still report autonegotiation were enabled. Strange.

ethtool (I tried v2 and v3) does not appear to work at all for 3C900C cards, "No data available" if run without options.

Any insight into these would be appreciated,

Signature · 1 line
Matthias Andree
#1 lore raw

In 2.6.11 ethtool data should be available. Please let me know if you are using 2.6.11 and ethtool does not work with your card.

I have no Tornado card to test but with 3c905/3c905B cards and options=0x204 configured, mii-diag reports:
Auto-negotiation disabled, with Speed fixed at 100 mbps, full-duplex.

I suppose you talking about 3c905C Tornado cards
(3c900 cards are not of Tornado type).

Steffen

Quoted 23 lines · Matthias Andree

Hi,

I've recently upgraded a router which has three 3Com900C Tornado cards revisions 74 and 78 from Linux 2.4 to 2.6.

IIRC, Linux 2.4 allowed to report if the link beat was sensed to be 10 or 100 mbps, Linux 2.6 does not. One of these cards is attached to peculiar network gear and needs to be forced to 100baseTx-FD. I configured options=0x204 for that interface, which sorta worked; vortex-diag and mii-diag still report autonegotiation were enabled. Strange.

ethtool (I tried v2 and v3) does not appear to work at all for 3C900C cards, "No data available" if run without options.

Any insight into these would be appreciated,

Signature · 5 lines
Matthias Andree
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw

Steffen Klassert schrieb am 2005-03-19:

Quoted 9 lines

In 2.6.11 ethtool data should be available. Please let me know if you are using 2.6.11 and ethtool does not work with your card.

I have no Tornado card to test but with 3c905/3c905B cards and options=0x204 configured, mii-diag reports:
Auto-negotiation disabled, with Speed fixed at 100 mbps, full-duplex.

I suppose you talking about 3c905C Tornado cards
(3c900 cards are not of Tornado type).

Ouch. Yes indeed, 3C905C. Please excuse my spreading confusion here. (I also have 3C900 Combo here, these are Boomerang cards.)

I'll try 2.6.11 as workload permits, the machine is a router in production with SuSE 9.2 (2.6.8 + SuSE hacks, "2.6.8-24.11-default") kernel.

Signature · 1 line
Matthias Andree