remove acpi_specific_hotkey kernel option
Subsystems (2)
PATCH 1/1 remove acpi_specific_hotkey kernel option
Hi Len,
The patch below (also attached) reverts part of the generic hotkey patch, specifically the acpi_specific_hotkey kernel option, for the following reasons:
- The default for this option is to disable several platform-specific drivers. This would break existing setups relying on those drivers.
- The generic hotkey driver relies on userspace setup but no userspace tools or configuration for common platforms exists. Making it the default at this time is not appropriate.
- The generic hotkey driver does not claim any ACPI devices at insmod time (since it doesn't know what HID to claim) and can therefore coexist with a platform-specific driver. It can then be up to the user to unload the undesired driver (or not compile it in the first place).
- The platform-specific drivers have more features than simply hot keys. For example, ibm-acpi has 13 other features (none of which can be implemented via standard ACPI methods).
The patch is against 2.6.12-rc1 + acpi-20050309. Please apply.
Regards,
Boris
drivers/acpi/asus_acpi.c +0 -4
@@ -1204,10 +1204,6 @@if (acpi_disabled)return -ENODEV ; -if (!acpi_specific_hotkey_enabled){ -printk (KERN_ERR "Using generic hotkey driver\n" ); -return -ENODEV ; - } asus_proc_dir =proc_mkdir (PROC_ASUS , acpi_root_dir);if (!asus_proc_dir) {printk (KERN_ERR "Asus ACPI: Unable to create /proc entry\n" );
drivers/acpi/hotkey.c +0 -5
@@ -907,11 +907,6 @@if (acpi_disabled)return -ENODEV ; -if (acpi_specific_hotkey_enabled) { -printk ("Using specific hotkey driver\n" ); -return -ENODEV ; - } - hotkey_proc_dir =proc_mkdir (HOTKEY_PROC , acpi_root_dir);if (!hotkey_proc_dir) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
drivers/acpi/ibm_acpi.c +0 -4
@@ -1185,10 +1185,6 @@if (acpi_disabled)return -ENODEV ; -if (!acpi_specific_hotkey_enabled){ -printk (IBM_ERR "Using generic hotkey driver\n" ); -return -ENODEV ; - }/* these handles are required */ if (IBM_HANDLE_INIT(ec, 1) < 0 || IBM_HANDLE_INIT(hkey, 1) < 0 ||
drivers/acpi/osl.c +0 -12
@@ -71,9 +71,6 @@extern char line_buf[80 ];#endif /*ENABLE_DEBUGGER*/ -int acpi_specific_hotkey_enabled; -EXPORT_SYMBOL (acpi_specific_hotkey_enabled); -static unsigned int acpi_irq_irq;static acpi_osd_handler acpi_irq_handler;static void *acpi_irq_context;
@@ -1155,15 +1152,6 @@__setup ("acpi_wake_gpes_always_on" , acpi_wake_gpes_always_on_setup); -int __init -acpi_hotkey_setup (char *str) -{ - acpi_specific_hotkey_enabled = TRUE; -return 1 ; -} - -__setup ("acpi_specific_hotkey" , acpi_hotkey_setup); -/* * max_cstate is defined in the base kernel so modules can * change it w/o depending on the state of the processor module.
drivers/acpi/toshiba_acpi.c +0 -4
@@ -530,10 +530,6 @@if (acpi_disabled)return -ENODEV ; -if (!acpi_specific_hotkey_enabled){ -printk (MY_INFO "Using generic hotkey driver\n" ); -return -ENODEV ; - }/* simple device detection: look for HCI method */ if (is_valid_acpi_path (METHOD_HCI_1 )) method_hci =METHOD_HCI_1 ;
include/acpi/acpi_drivers.h +0 -6
@@ -108,10 +108,4 @@int acpi_processor_set_thermal_limit (acpi_handle handle,int type); -/* -------------------------------------------------------------------------- -Hot Keys --------------------------------------------------------------------------- */ - -extern int acpi_specific_hotkey_enabled; -#endif /*__ACPI_DRIVERS_H__*/
drivers/acpi/asus_acpi.c +0 -4
@@ -1204,10 +1204,6 @@if (acpi_disabled)return -ENODEV ; -if (!acpi_specific_hotkey_enabled){ -printk (KERN_ERR "Using generic hotkey driver\n" ); -return -ENODEV ; - } asus_proc_dir =proc_mkdir (PROC_ASUS , acpi_root_dir);if (!asus_proc_dir) {printk (KERN_ERR "Asus ACPI: Unable to create /proc entry\n" );
drivers/acpi/hotkey.c +0 -5
@@ -907,11 +907,6 @@if (acpi_disabled)return -ENODEV ; -if (acpi_specific_hotkey_enabled) { -printk ("Using specific hotkey driver\n" ); -return -ENODEV ; - } - hotkey_proc_dir =proc_mkdir (HOTKEY_PROC , acpi_root_dir);if (!hotkey_proc_dir) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
drivers/acpi/ibm_acpi.c +0 -4
@@ -1185,10 +1185,6 @@if (acpi_disabled)return -ENODEV ; -if (!acpi_specific_hotkey_enabled){ -printk (IBM_ERR "Using generic hotkey driver\n" ); -return -ENODEV ; - }/* these handles are required */ if (IBM_HANDLE_INIT(ec, 1) < 0 || IBM_HANDLE_INIT(hkey, 1) < 0 ||
drivers/acpi/osl.c +0 -12
@@ -71,9 +71,6 @@extern char line_buf[80 ];#endif /*ENABLE_DEBUGGER*/ -int acpi_specific_hotkey_enabled; -EXPORT_SYMBOL (acpi_specific_hotkey_enabled); -static unsigned int acpi_irq_irq;static acpi_osd_handler acpi_irq_handler;static void *acpi_irq_context;
@@ -1155,15 +1152,6 @@__setup ("acpi_wake_gpes_always_on" , acpi_wake_gpes_always_on_setup); -int __init -acpi_hotkey_setup (char *str) -{ - acpi_specific_hotkey_enabled = TRUE; -return 1 ; -} - -__setup ("acpi_specific_hotkey" , acpi_hotkey_setup); -/* * max_cstate is defined in the base kernel so modules can * change it w/o depending on the state of the processor module.
drivers/acpi/toshiba_acpi.c +0 -4
@@ -530,10 +530,6 @@if (acpi_disabled)return -ENODEV ; -if (!acpi_specific_hotkey_enabled){ -printk (MY_INFO "Using generic hotkey driver\n" ); -return -ENODEV ; - }/* simple device detection: look for HCI method */ if (is_valid_acpi_path (METHOD_HCI_1 )) method_hci =METHOD_HCI_1 ;
include/acpi/acpi_drivers.h +0 -6
@@ -108,10 +108,4 @@int acpi_processor_set_thermal_limit (acpi_handle handle,int type); -/* -------------------------------------------------------------------------- -Hot Keys --------------------------------------------------------------------------- */ - -extern int acpi_specific_hotkey_enabled; -#endif /*__ACPI_DRIVERS_H__*/