Skip to contentSkip to conversation

drivers/pci/hotplug/cpqphp_ctrl.c: board_replaced: dead code

DISCUSSION Adrian Bunk 2 participants 2 messages Mar 22, 2005 – Mar 25, 2005 PCI

lore
Share & tools
lore
#0 lore raw

The Coverity checker correctly noted, that in function board_replaced in drivers/pci/hotplug/cpqphp_ctrl.c, the variable src always has the value 8, and therefore much code after the

...

                        if (rc || src) {
...
                                if (rc)
                                        return rc;
                                else
                                        return 1;
                        }

...

can never be called.

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#1 lore raw
Quoted 12 lines · Adrian Bunk

The Coverity checker correctly noted, that in function board_replaced in drivers/pci/hotplug/cpqphp_ctrl.c, the variable src always has the value 8, and therefore much code after the

...

                        if (rc || src) {
...
                                if (rc)
                                        return rc;
                                else
                                        return 1;
                        }
Quoted 4 lines

...

can never be called.

Yes, this is the only use of src in the whole function. If this is not a bug than this patch removes all the dead code.

Eike

drivers/pci/hotplug/cpqphp_ctrl.c +14 -88
@@ -1284,7 +1284,6 @@ static u32 board_replaced(struct pci_fun
 	u8 adapter_speed;
 	u32 index;
 	u32 rc = 0;
-	u32 src = 8;
 
 	hp_slot = func->device - ctrl->slot_device_offset;
 
@@ -1367,98 +1366,25 @@ static u32 board_replaced(struct pci_fun
 			/* It must be the same board */
 
 			rc = cpqhp_configure_board(ctrl, func);
+		}
+		/* If configuration fails, turn it off
+		 * Get slot won't work for devices behind
+		 * bridges, but in this case it will always be
+		 * called for the "base" bus/dev/func of an
+		 * adapter. */
 
-			if (rc || src) {
-				/* If configuration fails, turn it off
-				 * Get slot won't work for devices behind
-				 * bridges, but in this case it will always be
-				 * called for the "base" bus/dev/func of an
-				 * adapter. */
-
-				down(&ctrl->crit_sect);
-
-				amber_LED_on (ctrl, hp_slot);
-				green_LED_off (ctrl, hp_slot);
-				slot_disable (ctrl, hp_slot);
-
-				set_SOGO(ctrl);
-
-				/* Wait for SOBS to be unset */
-				wait_for_ctrl_irq (ctrl);
-
-				up(&ctrl->crit_sect);
-
-				if (rc)
-					return rc;
-				else
-					return 1;
-			}
-
-			func->status = 0;
-			func->switch_save = 0x10;
-
-			index = 1;
-			while (((func = cpqhp_slot_find(func->bus, func->device, index)) != NULL) && !rc) {
-				rc |= cpqhp_configure_board(ctrl, func);
-				index++;
-			}
-
-			if (rc) {
-				/* If configuration fails, turn it off
-				 * Get slot won't work for devices behind
-				 * bridges, but in this case it will always be
-				 * called for the "base" bus/dev/func of an
-				 * adapter. */
-
-				down(&ctrl->crit_sect);
-
-				amber_LED_on (ctrl, hp_slot);
-				green_LED_off (ctrl, hp_slot);
-				slot_disable (ctrl, hp_slot);
-
-				set_SOGO(ctrl);
-
-				/* Wait for SOBS to be unset */
-				wait_for_ctrl_irq (ctrl);
-
-				up(&ctrl->crit_sect);
-
-				return rc;
-			}
-			/* Done configuring so turn LED on full time */
-
-			down(&ctrl->crit_sect);
-
-			green_LED_on (ctrl, hp_slot);
-
-			set_SOGO(ctrl);
-
-			/* Wait for SOBS to be unset */
-			wait_for_ctrl_irq (ctrl);
-
-			up(&ctrl->crit_sect);
-			rc = 0;
-		} else {
-			/* Something is wrong
-
-			 * Get slot won't work for devices behind bridges, but
-			 * in this case it will always be called for the "base"
-			 * bus/dev/func of an adapter. */
-
-			down(&ctrl->crit_sect);
-
-			amber_LED_on (ctrl, hp_slot);
-			green_LED_off (ctrl, hp_slot);
-			slot_disable (ctrl, hp_slot);
+		down(&ctrl->crit_sect);
 
-			set_SOGO(ctrl);
+		amber_LED_on(ctrl, hp_slot);
+		green_LED_off(ctrl, hp_slot);
+		slot_disable(ctrl, hp_slot);
 
-			/* Wait for SOBS to be unset */
-			wait_for_ctrl_irq (ctrl);
+		set_SOGO(ctrl);
 
-			up(&ctrl->crit_sect);
-		}
+		/* Wait for SOBS to be unset */
+		wait_for_ctrl_irq(ctrl);
 
+		up(&ctrl->crit_sect);
 	}
 	return rc;