Skip to contentSkip to conversation

Bug#270376: PCMCIA Nic stops working after upgrading to 2.6.6/7/8

DISCUSSION maximilian attems 1 participant 1 message Apr 1, 2005 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

cc'ing the pcmcia maintainer and the author of
the patch for interrupt routing for TI bridges.
concerning a bug report about non working irq routing since 2.6.6-rc1 up until 2.6.12-rc1-mm3
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=270376
(lspci, dmesg)

hope you can help to resolve that issue.
i volountary test build kernels for bug reporter with proposed patches.

Quoted 1 line · Jefferson Cowart

(For reference my primary card is a 3C574. My secondary is a 3C589.)

..

Quoted 21 lines

========

(I put that card into a Windows XP laptop and it worked fine there so the card itself is fine.)

Now I'm trying to see if I have these same problems on 2.5.5

First, Booting with the secondary card plugged in had the same failure as above.
Next booting with the primary plugged in. It worked (as expected). Then I was able to pull and re-insert the card without problems. However pulling the primary and inserting the secondary killed the network (as expected).

Now I'm going back to 2.4.27 to figure out if my secondary card will work there. It failed. I got a hard lock when I inserted the card. (Reboot button needed.)

I'm 99.9% certain that my testing of 2.6.6-2.6.10 was using my primary nic, but I'm booting 2.6.10 now to be sure. (I know the kernels I tested for you yesterday used my primary nic.) As expected no networking.

Quoted 6 lines

It looks like we may have 2 different bugs here: one in the yenta_socket driver starting somewhere after 2.6.5-bk1 and before 2.6.6-rc1 and one in the 3c589 driver in I don't know what versions. (I seem to remember that 2.4.18 worked, but I'm not sure. If you want me to try that nic under and older kernel let me know, however I think fixing the first bug is more important.) If you need any further log info let me know.

indeed there is a change in the irq handling in the yenta code. it went in after 2.6.5-bk2 and is in 2.6.6-rc1.

in the context could you send please the ouput of a pre 2.6.6-rc1 kernel on your box:
cat /proc/interrupts

regarding your other pcmcia i don't know if it's supported. thanks for your feedback.

--
maks