Skip to contentSkip to conversation

syslog loves the new driver core code

PATCH Greg KH 2 participants 2 messages Mar 31, 2005 Driver core

lore
Share & tools
lore

Greg KH

author
#0 lore raw

Andrew pointed out to me that the new driver core code spewes a lot of stuff in the syslog for every device it tries to match up with a driver (if you look closely, it seems that the if check in __device_attach() will never not trigger...)

Everything still seems to work properly, but it's good if we don't alarm people with messages that are incorrect and unneeded. :)

So, here's a patch that seems to work for me. It stops trying to loop through drivers or devices once it finds a match, and it only tells the syslog when we have a real error.

Look acceptable to you?

thanks,

greg k-h

-----------
Driver core: Fix up the driver and device iterators to be quieter

Also stops looping over the lists when a match is found.

drivers/base/dd.c +19 -13
@@ -91,20 +91,23 @@ static int __device_attach(struct device
 	int error;
 
 	error = driver_probe_device(drv, dev);
-
-	if (error == -ENODEV && error == -ENXIO) {
-		/* Driver matched, but didn't support device 
-		 * or device not found.
-		 * Not an error; keep going.
-		 */
-		error = 0;
-	} else {
-		/* driver matched but the probe failed */
-		printk(KERN_WARNING
-		       "%s: probe of %s failed with error %d\n",
-		       drv->name, dev->bus_id, error);
+	if (error) {
+		if ((error == -ENODEV) || (error == -ENXIO)) {
+			/* Driver matched, but didn't support device 
+			 * or device not found.
+			 * Not an error; keep going.
+			 */
+			error = 0;
+		} else {
+			/* driver matched but the probe failed */
+			printk(KERN_WARNING
+			       "%s: probe of %s failed with error %d\n",
+			       drv->name, dev->bus_id, error);
+		}
+		return error;
 	}
-	return 0;
+	/* stop looking, this device is attached */
+	return 1;
 }
 
 
@@ -142,7 +145,10 @@ static int __driver_attach(struct device
 				       drv->name, dev->bus_id, error);
 			} else
 				error = 0;
+			return error;
 		}
+		/* stop looking, this driver is attached */
+		return 1;
 	}
 	return 0;
 }
#1 lore raw
Quoted 5 lines · Greg KH

Andrew pointed out to me that the new driver core code spewes a lot of stuff in the syslog for every device it tries to match up with a driver (if you look closely, it seems that the if check in __device_attach() will never not trigger...)

Quoted 8 lines

Everything still seems to work properly, but it's good if we don't alarm people with messages that are incorrect and unneeded. :)

So, here's a patch that seems to work for me. It stops trying to loop through drivers or devices once it finds a match, and it only tells the syslog when we have a real error.

Look acceptable to you?

Yes. Sorry about that.

Pat