Skip to contentSkip to conversation

2.6.11.6 (x86_64) Scsi-detect Oops

DISCUSSION Andrew Walrond 1 participant 2 messages Apr 2, 2005

lore
Share & tools
lore
#0 lore raw

This kernel has all ide and scsi drivers built in (config attached)

I can do the complete serial boot thing if really necessary, but someboby might have an inkling from these details jotted down by hand:

__fdomain_16x0_detect+29
init_this_scsi_driver+94
(RIP __fdomain_16x0_detect+419)

Looks like the "Future Domain 16xx SCSI/AHA-2920A" scsi driver detect routine is doing something naughty.

This is a Tyan 2885 dual x86_64 running a 64bit generic x86_64 kernel. It doesn't have any scsi hardware.

In the meantime, I'm going to remove this driver from the .config

Andrew Walrond

#1 lore raw
Quoted 3 lines · Andrew Walrond

In the meantime, I'm going to remove this driver from the .config

Boots fine without this driver compiled in (SCSI_FUTURE_DOMAIN=n)

Andrew Walrond