Skip to contentSkip to conversation

Platform bus/ppc sys model - [Fwd: bi_recs and u-boot ppcboot.h]

DISCUSSION Stefan Roese 1 participant 1 message Apr 4, 2005

lore
Share & tools
lore
#0 lore raw

Hi Jon,

Quoted 2 lines · Jon Masters

( basically, I've got ppcboot on an old CPCI405 here but it's not trivial to fix if I break it

The CPCI405 supports switching the boot-cs between its 2 flash chips with the DIP-switch 4. You could copy the current ppcboot version into the 2nd flash chip as a fallback (please test it once).

Please make sure to use the "CPCI405" U-Boot make-target and _not_ CPCI4052 for a revision 1.x board. To be sure what version of the board you have, please take a look at the FPGA. If it's a Spartan 05 then it's a revision 1.x board, if it's a Spartan 2 15 it's a revision 2.x board.

Quoted 3 lines

and I don't know much about whether u-boot
supports chaining in to a new u-boot loaded from within itself...but it probably does, I guess. Bah, it's late, I'm rambling...).

I am pretty sure that the current versions of U-Boot work without problems on the CPCI405 boards (even revision 1.x).

Best regards,
Stefan