tbf latency problems!
Hi i have found a problem related with tbf and the latency that the tbf calculates.. I have used the following parameters for burst and limit
burst 100Kbit limit 500Kbit lat81.8ms burst 6Kbit limit 6Kbit lat 0us burst 200Kbit limit 100Kbit lat 4294.9s
As u can see in the 3rd column the latency for 100Kbit burst and 500Kbit limit is 81.8ms but for 200Kbit and limit 100Kbit is 4294.9s!!! How could be possible??? I want to find a way to caclulate the latency for a packet entering my tbf.. What do u suggest me to do?
Ah! I use the tc -s qdisc ls dev eth1 command for the tbf statistics
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 6 lines · Alaios
Hi i have found a problem related with tbf and the latency that the tbf calculates.. I have used the following parameters for burst and limit
burst 100Kbit limit 500Kbit lat81.8ms burst 6Kbit limit 6Kbit lat 0us burst 200Kbit limit 100Kbit lat 4294.9s
What is the full command you used to get those?
Quoted 6 lines
As u can see in the 3rd column the latency for 100Kbit burst and 500Kbit limit is 81.8ms but for 200Kbit and limit 100Kbit is 4294.9s!!! How could be possible??? I want to find a way to caclulate the latency for a packet entering my tbf.. What do u suggest me to do?
latency is worked out from rate and limit (you can also specify latency and let tbf work out limit (it approximates, though)).
Quoted 3 lines
Ah! I use the tc -s qdisc ls dev eth1 command for the tbf statistics
Could be a stats bug that is fixed now, what kernel/tc version do you use.
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
thx for your answer... i use the 2.6.10 vanilla kernel.. i have downloaded two weeks ago the latest iproute2.
I have installed tbf with the following command
$tc qdisc add dev $DEV parent 2:1 tbf rate $EF_RATE burst $EF_BURST mtu $EF_MTU limit $EF_LIMIT
and i have got the results using
tc -s qdisc ls dev eth1
I dont really think that i have done something wrong for taking such calculation errors for the latency...
I plan to measure the latency this week with the appropriate scenario.. Tell me if u want to send you a short description of my scenario and of course of my results about the limit and the latency.
Thx in advance...
I would to contribute for the lartc... that's all
Quoted 28 lines · --- Andy Furniss
Quoted 6 lines · Alaios
Hi i have found a problem related with tbf and the latency that the tbf calculates.. I have used the following parameters for burst and limit
burst 100Kbit limit 500Kbit lat81.8ms burst 6Kbit limit 6Kbit lat 0us burst 200Kbit limit 100Kbit lat 4294.9sWhat is the full command you used to get those?
Quoted 2 lines
As u can see in the 3rd column the latency for
100Kbit
Quoted 1 line
burst and 500Kbit limit is 81.8ms but for 200Kbit
and
Quoted 1 line
limit 100Kbit is 4294.9s!!! How could be
possible???
Quoted 1 line
I want to find a way to caclulate the latency for
a
Quoted 1 line
packet entering my tbf.. What do u suggest me to
do?
latency is worked out from rate and limit (you can also specify latency
and let tbf work out limit (it approximates, though)).Quoted 1 line
Quoted 10 lines
Quoted 1 line
Ah! I use the tc -s qdisc ls dev eth1 command for
the
Quoted 1 line
tbf statistics
Could be a stats bug that is fixed now, what
kernel/tc version do you use.Andy.
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 4 lines · Alaios
thx for your answer... i use the 2.6.10 vanilla kernel.. i have downloaded two weeks ago the latest iproute2.
Quoted 8 lines
I have installed tbf with the following command
$tc qdisc add dev $DEV parent 2:1 tbf rate $EF_RATE burst $EF_BURST mtu $EF_MTU limit $EF_LIMIT
and i have got the results using
tc -s qdisc ls dev eth1
I will try if you give me all the numbers you used.
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc