pcnet_cs problems in ARM handheld
Hi David and others kernel developers,
Thanx for your pcnet_cs driver! I use it since old days :-P
I bought a IC-CARD+ pcnet_cs compatible pcmcia nic, and i'm using it on a StrongARM HP Jornada 710. My kernel is a 2.4.18-rmk3-hh10 and my pcmcia-cs version is 3.1.33
From dmesg I got this messages:
--jornada720_pcmcia_configure_socket(): config socket 0 vcc 50 vpp 0 jornada720_pcmcia_configure_socket(): config socket 0 vcc 50 vpp 0
eth0: NE2000 Compatible: io 0xc2800300, irq 114, hw_addr 00:80:C8:88:00:56
eth0: interrupt(s) dropped!
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x96, t=39. NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=55. NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=49. NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=88.
eth0: interrupt(s) dropped!
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=77.
--
Any suggestions?
I tried to change some values in pcnet_cs.c:
INT_MODULE_PARM(use_big_buf, 1); /* i tried 0 */ INT_MODULE_PARM(delay_output, 0); /* I tried 1 */ INT_MODULE_PARM(delay_time, 4); /* I tried 6 */
but no change helped...
bye,
rafael diniz
Signature · 8 lines
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- Engenharia da Computação -- Unicamp Radio Muda, radiolivre.org, Centro de Mídia Independente, SubMídia, GPSL Chave PGP: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x2FF86098 -> orkut sucks, e naum estou nessa porcaria <- "Acreditar que um conhecimento pode ser vendido ou comprado é uma forma sutil (e cruel) de perpetuar a ignorância." +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Quoted 9 lines · On Mon, Apr 11, 2005 at 04:22:52PM +0000, rafael2k wrote:
Hi David and others kernel developers,
Thanx for yourpcnet_csdriver! I use it since old days :-PI bought a IC-CARD+
pcnet_cscompatible pcmcia nic, and i'm using it on a StrongARM HP Jornada 710. My kernel is a 2.4.18-rmk3-hh10 and my pcmcia-cs version is 3.1.33From dmesg I got this messages:
Quoted 16 lines
--
jornada720_pcmcia_configure_socket(): config socket 0 vcc 50 vpp 0jornada720_pcmcia_configure_socket(): config socket 0 vcc 50 vpp 0
eth0: NE2000 Compatible: io0xc2800300, irq 114,hw_addr00:80:C8:88:00:56
eth0: interrupt(s) dropped!
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x96, t=39. NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=55. NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=49. NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=88.
eth0: interrupt(s) dropped!
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=77.
This looks like a case of the old 2.4 interrupt handling problems which got resolved by rewriting the ARM interrupt handling infrastructure during 2.5.
The problem occurs because of the need to handle edge-triggered interrupts (as is the case with Intel CPUs) differently from level-triggered interrupts, especially when the peripherals are designed to be used with level-triggered inputs.
In effect, you can end up with the situation where the device has its interrupt asserted, but because the CPU doesn't see a change of state, it "forgets" about the interrupt input.
I'm not aware of a solution for this problem with 2.4 kernels.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core