Skip to contentSkip to conversation

LOADBALANCING+BRIDGING---is it possible on the same

LARTC KartheeK 3 participants 3 messages Apr 14, 2005 – May 3, 2005

lore
Share & tools
lore

KartheeK

author
#0 lore raw

Hello All,
I have a linux box running with three NIC's, I have used brctl tool to configure this box as a bridge, i have given it ONE logical ipaddres, Every thing is working fine, but now i am required to configure the same bridge as a LOAD BALANCER.... On some googling i found the following link

http://lartc.org/howto/lartc.rpdb.multiple-links.html

This HOWTO requires me to have one ip address for each NIC, while i dont in my case... Now, is BRIDGING+LOAD BALANCING possibe on the same machine???

Any sort of inputs regarding the matter is most welcome

Thanx in advance
KARTHEEK

Yahoo! India Matrimony: Find your life partneronline.

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

Re: [LARTC] LOADBALANCING+BRIDGING---is it possible on the

Quoted 11 lines

I have a linux box running with three NIC's, I have used brctl tool to configure this box as a bridge, i have given it ONE logical ipaddres, Every thing is working fine, but now i am required to configure the same bridge as a LOAD BALANCER....
On some googling i found the following link

http://lartc.org/howto/lartc.rpdb.multiple-links.html

This HOWTO requires me to have one ip address for each NIC, while i dont in my case...
Now, is BRIDGING+LOAD BALANCING possibe on the same machine???

Are you trying to load balance on the IP / routing level or on the physical ethernet level? What are you trying to load balance in and out from? Did you bridge your interfaces together to allow your services to run on one (virtual) bridge interface in the hopes to get more aggregate bandwidth out of the box or did you bridge your interfaces to join three separate physical networks? If it is the former and you are trying to get more aggregate bandwidth, take a look at Bonding (Cisco EtherChannel).

Grant. . . .
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#2 lore raw
In reply to KartheeK
Quoted 7 lines · On Thu, 14 Apr 2005 20:16:55 +0100 (BST) KartheeK <[email protected]>…

Hello All,
I have a linux box running with three NIC's, I have used brctl tool to configure this box as a bridge, i have given it ONE logical ipaddres, Every thing is working fine, but now i am required to configure the same bridge as a LOAD BALANCER.... On some googling i found the following link

http://lartc.org/howto/lartc.rpdb.multiple-links.html

Quoted 7 lines

This HOWTO requires me to have one ip address for each NIC, while i dont in my case... Now, is BRIDGING+LOAD BALANCING possibe on the same machine???

Any sort of inputs regarding the matter is most welcome

Thanx in advance
KARTHEEK

It is not possible to load balance with a bridge because bridging constructs a spanning tree. If you are doing load balancing you want bonding not bridging.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc