Skip to contentSkip to conversation

2.6 PCMCIA/USB question

DISCUSSION Joerg Pommnitz 3 participants 3 messages Apr 15, 2005

lore
Share & tools
lore
#0 lore raw

Hello all,
I have a question that I could not figure out from other sources. I have the following hardware: an integrated CardBus USB host adapter with a connected USB serial device with three interfaces (normally ttyUSB0...ttyUSB2). Now I want to use 3 of these devices (remember: they are integrated, so I can't just plug the USB device onto the same host adapter). I know device A is in CardBus slot 1, device B is in CardBus slot 2 and so on.

Now the question: How do I figure out which ttyUSBx belongs to which device?

Thanks in advance
Joerg

___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 250MB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de

#1 lore raw

Trial and error (and hope they are always the same, which I think they are with 2.6).

Quoted 24 lines · Joerg Pommnitz

Hello all,
I have a question that I could not figure out from other sources. I have the following hardware: an integrated CardBus USB host adapter with a connected USB serial device with three interfaces (normally ttyUSB0...ttyUSB2). Now I want to use 3 of these devices (remember: they are integrated, so I can't just plug the USB device onto the same host adapter). I know device A is in CardBus slot 1, device B is in CardBus slot 2 and so on.

Now the question: How do I figure out which ttyUSBx belongs to which device?

Thanks in advance
Joerg

___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 250MB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de

Quoted 10 lines

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

--
/------------------------------------+-------------------------\

|Stephen J. Gowdy                     | SLAC, MailStop 34,       |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
|http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
|EMail: [email protected]       | Tel: +1 650 926 3144     |

\------------------------------------+-------------------------/

#2 lore raw
In reply to Joerg Pommnitz
Quoted 11 lines · Joerg Pommnitz

Hello all,
I have a question that I could not figure out from other sources. I have the following hardware: an integrated CardBus USB host adapter with a connected USB serial device with three interfaces (normally ttyUSB0...ttyUSB2). Now I want to use 3 of these devices (remember: they are integrated, so I can't just plug the USB device onto the same host adapter). I know device A is in CardBus slot 1, device B is in CardBus slot 2 and so on.

Now the question: How do I figure out which ttyUSBx belongs to which device?

You can look in the system log. If you want, you can actually control which goes where by creating a udev configuration file.

Alan Stern