Skip to contentSkip to conversation

noddy question involving /dev/vc/0 and /dev/fb/0 on 2.6.7.11

DISCUSSION Luke Kenneth Casson Leighton 1 participant 1 message Apr 21, 2005

lore
Share & tools
lore
#0 lore raw

hi, please reply cc to me as well because i am not on these lists (well i am but the receive post options are switched off), thank you.

i have a "noddy" question where what used to work under 2.4.27 (echo 'hello world' > /dev/vc/0) now doesn't work on 2.6.7.11, even though echo 'garbage' > /dev/fb/0 does - just like it used to on 2.4.27.

this is with an arm embedded system i'm developing for (CLPS711x derivative) and i have it set up so that the console is on the serial port.

i have ported the framebuffer device over to 2.6, and have it working (echo garbage > /dev/fb/0 shows up garbage in the top left corner).

what kernel options do i need such that echo 'hello world' > /dev/vc/0 will work and i get my lovely flashing cursor back?

many thanks,

l.

Signature · 3 lines
--
<a href="http://lkcl.net">http://lkcl.net</a>
--