Encryption Mode Not Acceptable

Bluez-users [email protected] 2 participants 2 messages Apr 26, 2005 Bluetooth drivers

Share & tools

[email protected]

author

2005-04-26 20:35 UTC #0 lore raw

Hello,
i am trying to connect my zaurus (2.4.18-rmk7-pxa3-embedix + dtl1_cs) with my linux host (2.6.11 hci_usb).
The zaurus says
ZAURUS# hcitool cc XXX
Can't create connection: Connection timeout
HOST# hcidump -a -V -x
HCI sniffer - Bluetooth packet analyzer ver 1.17
device: hci0 snap_len: 1028 filter: 0xffffffff

Quoted 1 line

HCI Event: Connect Request (0x04) plen 10

    bdaddr 00:E0:03:25:0B:EF class 0x000000 type ACL

< HCI Command: Accept Connection Request (0x01|0x0009) plen 7

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1

Quoted 1 line

HCI Event: Connect Complete (0x03) plen 11

status 0x24 handle 41 bdaddr 00:E0:03:25:0B:EF type ACL encrypt 0x00
Error: Encryption Mode Not Acceptable

i played with different configurations in hcid.conf, but they make no difference.
Strangely A connection from host to zaurus works fine. After that the zaurus can create a bnep connection to the host.

Has anyone a clue how to solve the problem?

Best regards

Rainer

-------------------------------------------------------
SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey
Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2005-04-26 20:49 UTC #1 lore raw

Hi Rainer,

Quoted 8 lines

i am trying to connect my zaurus (2.4.18-rmk7-pxa3-embedix + dtl1_cs) with my linux host (2.6.11 hci_usb).
The zaurus says
ZAURUS# hcitool cc XXX
Can't create connection: Connection timeout
HOST# hcidump -a -V -x
HCI sniffer - Bluetooth packet analyzer ver 1.17
device: hci0 snap_len: 1028 filter: 0xffffffff

Quoted 8 lines

Quoted 1 line
HCI Event: Connect Request (0x04) plen 10
    bdaddr 00:E0:03:25:0B:EF class 0x000000 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4
    Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
Quoted 1 line
HCI Event: Connect Complete (0x03) plen 11
status 0x24 handle 41 bdaddr 00:E0:03:25:0B:EF type ACL encrypt 0x00
Error: Encryption Mode Not Acceptable

update hcidump to version 1.20 and try again with "hcidump -X -V" as root.

If you plan to use BNEP then use pand for testing and not "hcitool cc".

Regards

Marcel