Skip to contentSkip to conversation

ATA port addresses

DISCUSSION john doe 2 participants 2 messages Apr 29, 2005

lore
Share & tools
lore

john doe

author
#0 lore raw

Thank you for the prompt reply!

I'll look at this option closer. Is there a way to bypass the IDE driver though? I was hoping the code would run at the driver level for security reasons. I would like to write the command to the device directly.

Quoted 6 lines

Its architecture and board dependent. Linux will let you issue IDE
taskfile command blocks via ioctls so you can avoid poking the hardware
(and poking the hardware will upset the ide driver..)

______________________________________________________________________
Post your free ad now! http://personals.yahoo.ca

#1 lore raw
Quoted 4 lines · john doe

Thank you for the prompt reply!

I'll look at this option closer. Is there a way to bypass the IDE driver though?

Write your own kernel 8) There isn't really a way to bypass it and since you rely on the kernel for functionality like mmap you rely on it for trust anyway. More pressingly you need DMA functionality for some hardware and the newer devices are all getting very clever and sometimes very unique in their interfacing