zImage on 2.6?
Is it possible to use zImage on 2.6 kernels or is bzImage required?
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
On Mon, 2 May 2005 21:29:51 -0400 Wakko Warner wrote:
| Is it possible to use zImage on 2.6 kernels or is bzImage required?
What processor architecture?
It's supported in arch/i386/Makefile (and some others). For i386, you'll need to disable enough (lots of) options to make the resulting output file small enough...
---
~Randy
Quoted 4 lines · Randy.Dunlap
On Mon, 2 May 2005 21:29:51 -0400 Wakko Warner wrote:
| Is it possible to use zImage on 2.6 kernels or is bzImage required?What processor architecture?
x86. Does zImage work on other arches? (I've only ever dealt with alpha and sparc other than x86)
Quoted 3 lines
It's supported in
arch/i386/Makefile(and some others). For i386, you'll need to disable enough (lots of) options to make the resulting output file small enough...
The resultant bzImage is ~760kb. I compiled out everything I could, only ram disk/initrd, and ext2 are compiled in.
If you'd like to see the .config, I'll send it up.
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
On Tue, 3 May 2005 06:45:03 -0400 Wakko Warner wrote:
| Randy.Dunlap wrote: | > On Mon, 2 May 2005 21:29:51 -0400 Wakko Warner wrote: | > | Is it possible to use zImage on 2.6 kernels or is bzImage required? | > | > What processor architecture? | | x86. Does zImage work on other arches? (I've only ever dealt with alpha | and sparc other than x86)
I don't know if it works, just that it's listed in:
ppc, arm, sh, cris, arm26, m68k, ppc64, parisc, m32r, frv, and sh64. and i386.
| > It's supported in arch/i386/Makefile (and some others). | > For i386, you'll need to disable enough (lots of) options to make the | > resulting output file small enough... | | The resultant bzImage is ~760kb. I compiled out everything I could, only | ram disk/initrd, and ext2 are compiled in. | | If you'd like to see the .config, I'll send it up.
Are you saying that zImage still fails (image is too large?) ?
I built one, but I wouldn't want to boot it. :) It looks like you would need to put almost everything into an initrd to make it usable.
---
~Randy
Quoted 11 lines · Randy.Dunlap
On Tue, 3 May 2005 06:45:03 -0400 Wakko Warner wrote:
| > It's supported in arch/i386/Makefile (and some others). | > For i386, you'll need to disable enough (lots of) options to make the | > resulting output file small enough... | | The resultant bzImage is ~760kb. I compiled out everything I could, only | ram disk/initrd, and ext2 are compiled in. | | If you'd like to see the .config, I'll send it up.Are you saying that zImage still fails (image is too large?) ?
Yes, I do recall it says "System is 724k". zImage failes. bzImage says 724k as well and succeeds.
Quoted 3 lines
I built one, but I wouldn't want to boot it. :) It looks like you would need to put almost everything into an initrd to make it usable.
That was the idea in this. Once I get my stuff the way I want it, I'll probably move on to using initramfs. My initrd is using ramdisk, my / is on tmpfs and is populated by .tgz files on other media (The boot time is generally short lived by design anyway)
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
On Tue, 3 May 2005 12:33:43 -0400 Wakko Warner wrote:
| Randy.Dunlap wrote: | > On Tue, 3 May 2005 06:45:03 -0400 Wakko Warner wrote: | > | > It's supported in arch/i386/Makefile (and some others). | > | > For i386, you'll need to disable enough (lots of) options to make the | > | > resulting output file small enough... | > | | > | The resultant bzImage is ~760kb. I compiled out everything I could, only | > | ram disk/initrd, and ext2 are compiled in. | > | | > | If you'd like to see the .config, I'll send it up. | > | > Are you saying that zImage still fails (image is too large?) ? | | Yes, I do recall it says "System is 724k". zImage failes. bzImage says | 724k as well and succeeds.
The image size needs to be <= 0x7f000 (520192 bytes, 508 KB).
(No, I don't know why, just that this is what is being enforced.)
Just cut more out of the kernel image...
| > I built one, but I wouldn't want to boot it. :) | > It looks like you would need to put almost everything into | > an initrd to make it usable. | | That was the idea in this. Once I get my stuff the way I want it, I'll | probably move on to using initramfs. My initrd is using ramdisk, my / is on | tmpfs and is populated by .tgz files on other media (The boot time is | generally short lived by design anyway)
---
~Randy
Quoted 10 lines · Randy.Dunlap
On Tue, 3 May 2005 12:33:43 -0400 Wakko Warner wrote:
| Yes, I do recall it says "System is 724k". zImage failes. bzImage says | 724k as well and succeeds.The image size needs to be <=
0x7f000(520192 bytes, 508 KB).(No, I don't know why, just that this is what is being enforced.)
Just cut more out of the kernel image...
Any suggestions? All that I know of that is modularizable is a module, except for keyboard, ext2, unix sockets, ramdisk+initrd. Some of the options I need since this is supposed to support all relevent hardware that we use where I work. (all scsi,ide,sata,raid cards,ethernet cards that we have)
Hmm, I did find one I forgot. CONFIG_MII.
Here's my =y config:
X86=y
MMU=y
UID16=y
GENERIC_ISA_DMA=y
GENERIC_IOMAP=y
EXPERIMENTAL=y
CLEAN_COMPILE=y
BROKEN_ON_SMP=y
SYSCTL=y
HOTPLUG=y
EMBEDDED=y
TINY_SHMEM=y
MODULES=y
MODULE_UNLOAD=y
MODULE_FORCE_UNLOAD=y
OBSOLETE_MODPARM=y
KMOD=y
X86_PC=y
M586=y
X86_CMPXCHG=y
X86_XADD=y
RWSEM_XCHGADD_ALGORITHM=y
GENERIC_CALIBRATE_DELAY=y
X86_PPRO_FENCE=y
X86_F00F_BUG=y
X86_WP_WORKS_OK=y
X86_INVLPG=y
X86_BSWAP=y
X86_POPAD_OK=y
X86_ALIGNMENT_16=y
NOHIGHMEM=y
PM=y
ACPI=y
ACPI_BOOT=y
ACPI_INTERPRETER=y
ACPI_BUS=y
ACPI_EC=y
ACPI_POWER=y
ACPI_PCI=y
ACPI_SYSTEM=y
PCI=y
PCI_GOANY=y
PCI_BIOS=y
PCI_DIRECT=y
PCI_MMCONFIG=y
ISA=y
CARDBUS=y
PCMCIA_PROBE=y
BINFMT_ELF=y
STANDALONE=y
PREVENT_FIRMWARE_BUILD=y
PNP=y
ISAPNP=y
BLK_DEV_RAM=y
BLK_DEV_INITRD=y
IOSCHED_NOOP=y
IDEDISK_MULTI_MODE=y
BLK_DEV_IDEPCI=y
IDEPCI_SHARE_IRQ=y
BLK_DEV_IDEDMA_PCI=y
IDEDMA_PCI_AUTO=y
BLK_DEV_IDEDMA=y
IDEDMA_AUTO=y
SCSI_PROC_FS=y
AIC7XXX_DEBUG_ENABLE=y
AIC7XXX_REG_PRETTY_PRINT=y
AIC79XX_DEBUG_ENABLE=y
AIC79XX_REG_PRETTY_PRINT=y
MEGARAID_NEWGEN=y
SCSI_SATA=y
NET=y
INET=y
NETDEVICES=y
NET_ETHERNET=y
NET_VENDOR_3COM=y
NET_VENDOR_SMC=y
NET_TULIP=y
NET_PCI=y
8139TOO_PIO=y
NET_RADIO=y
NET_WIRELESS=y
NET_PCMCIA=y
INPUT=y
INPUT_KEYBOARD=y
KEYBOARD_ATKBD=y
SERIO=y
SERIO_I8042=y
SERIO_LIBPS2=y
SOUND_GAMEPORT=y
VT=y
VT_CONSOLE=y
HW_CONSOLE=y
VGA_CONSOLE=y
DUMMY_CONSOLE=y
USB_ARCH_HAS_HCD=y
USB_ARCH_HAS_OHCI=y
USB_DEVICEFS=y
USB_OHCI_LITTLE_ENDIAN=y
USB_STORAGE_FREECOM=y
USB_STORAGE_ISD200=y
USB_STORAGE_DPCM=y
USB_STORAGE_USBAT=y
USB_STORAGE_SDDR09=y
USB_STORAGE_SDDR55=y
USB_STORAGE_JUMPSHOT=y
USB_HIDINPUT=y
USB_ALI_M5632=y
USB_AN2720=y
USB_BELKIN=y
USB_GENESYS=y
USB_NET1080=y
USB_PL2301=y
USB_KC2190=y
USB_ARMLINUX=y
USB_EPSON2888=y
USB_ZAURUS=y
USB_CDCETHER=y
USB_AX8817X=y
EXT2_FS=y
JOLIET=y
UDF_NLS=y
NTFS_RW=y
PROC_FS=y
SYSFS=y
TMPFS=y
RAMFS=y
NFS_V3=y
LOCKD_V4=y
MSDOS_PARTITION=y
DEBUG_KERNEL=y
MAGIC_SYSRQ=y
CRYPTO=y
GENERIC_HARDIRQS=y
GENERIC_IRQ_PROBE=y
X86_BIOS_REBOOT=y
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
I'll be honest. zImage kernels are pointless, and are _BIGGER_ than a bzImage kernel.
You should realize that use of zImage kernels detucts 100 points off your IQ.
Quoted 147 lines · --- Wakko Warner
Quoted 10 lines · Randy.Dunlap
On Tue, 3 May 2005 12:33:43 -0400 Wakko Warner wrote:
| Yes, I do recall it says "System is 724k". zImage failes. bzImage says | 724k as well and succeeds.The image size needs to be <=
0x7f000(520192 bytes, 508 KB).(No, I don't know why, just that this is what is being enforced.)
Just cut more out of the kernel image...
Any suggestions? All that I know of that is modularizable is a module, except for keyboard, ext2, unix sockets, ramdisk+initrd. Some of the options I need since this is supposed to support all relevent hardware that we use where I work. (all scsi,ide,sata,raid cards,ethernet cards that we have)
Hmm, I did find one I forgot.
CONFIG_MII.Here's my =y config:
X86=y
MMU=y
UID16=y
GENERIC_ISA_DMA=y
GENERIC_IOMAP=y
EXPERIMENTAL=y
CLEAN_COMPILE=y
BROKEN_ON_SMP=y
SYSCTL=y
HOTPLUG=y
EMBEDDED=y
TINY_SHMEM=y
MODULES=y
MODULE_UNLOAD=y
MODULE_FORCE_UNLOAD=y
OBSOLETE_MODPARM=y
KMOD=y
X86_PC=y
M586=y
X86_CMPXCHG=y
X86_XADD=y
RWSEM_XCHGADD_ALGORITHM=y
GENERIC_CALIBRATE_DELAY=y
X86_PPRO_FENCE=y
X86_F00F_BUG=y
X86_WP_WORKS_OK=y
X86_INVLPG=y
X86_BSWAP=y
X86_POPAD_OK=y
X86_ALIGNMENT_16=y
NOHIGHMEM=y
PM=y
ACPI=y
ACPI_BOOT=y
ACPI_INTERPRETER=y
ACPI_BUS=y
ACPI_EC=y
ACPI_POWER=y
ACPI_PCI=y
ACPI_SYSTEM=y
PCI=y
PCI_GOANY=y
PCI_BIOS=y
PCI_DIRECT=y
PCI_MMCONFIG=y
ISA=y
CARDBUS=y
PCMCIA_PROBE=y
BINFMT_ELF=y
STANDALONE=y
PREVENT_FIRMWARE_BUILD=y
PNP=y
ISAPNP=y
BLK_DEV_RAM=y
BLK_DEV_INITRD=y
IOSCHED_NOOP=y
IDEDISK_MULTI_MODE=y
BLK_DEV_IDEPCI=y
IDEPCI_SHARE_IRQ=y
BLK_DEV_IDEDMA_PCI=y
IDEDMA_PCI_AUTO=y
BLK_DEV_IDEDMA=y
IDEDMA_AUTO=y
SCSI_PROC_FS=y
AIC7XXX_DEBUG_ENABLE=y
AIC7XXX_REG_PRETTY_PRINT=y
AIC79XX_DEBUG_ENABLE=y
AIC79XX_REG_PRETTY_PRINT=y
MEGARAID_NEWGEN=y
SCSI_SATA=y
NET=y
INET=y
NETDEVICES=y
NET_ETHERNET=y
NET_VENDOR_3COM=y
NET_VENDOR_SMC=y
NET_TULIP=y
NET_PCI=y
8139TOO_PIO=y
NET_RADIO=y
NET_WIRELESS=y
NET_PCMCIA=y
INPUT=y
INPUT_KEYBOARD=y
KEYBOARD_ATKBD=y
SERIO=y
SERIO_I8042=y
SERIO_LIBPS2=y
SOUND_GAMEPORT=y
VT=y
VT_CONSOLE=y
HW_CONSOLE=y
VGA_CONSOLE=y
DUMMY_CONSOLE=y
USB_ARCH_HAS_HCD=y
USB_ARCH_HAS_OHCI=y
USB_DEVICEFS=y
USB_OHCI_LITTLE_ENDIAN=y
USB_STORAGE_FREECOM=y
USB_STORAGE_ISD200=y
USB_STORAGE_DPCM=y
USB_STORAGE_USBAT=y
USB_STORAGE_SDDR09=y
USB_STORAGE_SDDR55=y
USB_STORAGE_JUMPSHOT=y
USB_HIDINPUT=y
USB_ALI_M5632=y
USB_AN2720=y
USB_BELKIN=y
USB_GENESYS=y
USB_NET1080=y
USB_PL2301=y
USB_KC2190=y
USB_ARMLINUX=y
USB_EPSON2888=y
USB_ZAURUS=y
USB_CDCETHER=y
USB_AX8817X=y
EXT2_FS=y
JOLIET=y
UDF_NLS=y
NTFS_RW=y
PROC_FS=y
SYSFS=y
TMPFS=y
RAMFS=y
NFS_V3=y
Quoted 17 lines
LOCKD_V4=y
MSDOS_PARTITION=y
DEBUG_KERNEL=y
MAGIC_SYSRQ=y
CRYPTO=y
GENERIC_HARDIRQS=y
GENERIC_IRQ_PROBE=y
X86_BIOS_REBOOT=ySignature · 6 lines
Lab tests show that use of micro$oft causes cancer in lab animals - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Jeez... Is it just me or is it that most people today are too fucking retarded to use a computer?
Semper fi pengunius.
Webmaster of Segin's Open Source Den.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 1 line · segin
I'll be honest. zImage kernels are pointless, and are _BIGGER_ than a bzImage kernel.
Others have stated this.
Quoted 1 line
You should realize that use of zImage kernels detucts 100 points off your IQ.
I was trying to do comparisions between the 2. I would not have cared as long as 1) it was smaller and 2) it worked.
Maybe they should deduct 100 off whoever is keeping zImage target still in the make files.
Quoted 1 line
Jeez... Is it just me or is it that most people today are too fucking retarded to use a computer?
Uh, excuse me?! I ask a question and you have to do this?! Really, you are of no help to me.
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
Agreed. The idiot who keeps zImage as a possible target in the makefile should be taken out and shot, or forced to use Windows.
Quoted 10 lines · --- Wakko Warner
Quoted 1 line · segin
I'll be honest. zImage kernels are pointless, and are _BIGGER_ than a bzImage kernel.
Others have stated this.
Quoted 1 line
You should realize that use of zImage kernels detucts 100 points off your IQ.
I was trying to do comparisions between the 2. I would not have cared as long as 1) it was smaller and 2) it worked.
Quoted 17 lines
Maybe they should deduct 100 off whoever is keeping zImage target still in the make files.
Quoted 1 line
Jeez... Is it just me or is it that most people today are too fucking retarded to use a
computer?
Uh, excuse me?! I ask a question and you have to do this?! Really, you are of no help to me.
Signature · 6 lines
Lab tests show that use of micro$oft causes cancer in lab animals - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Jeez... Is it just me or is it that most people today are too fucking retarded to use a computer?
Semper fi pengunius.
Webmaster of Segin's Open Source Den.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
On Tue, 3 May 2005, Wakko Warner wrote:
On an interesting side note, when running linux on IBM rs/6000, which is a ppc64 machine, one must use a zImage kernel dd'ed into a small PReP partition to boot the machine... bzImage kernels will not work.
Scott
Quoted 18 lines
Quoted 1 line · segin
I'll be honest. zImage kernels are pointless, and are _BIGGER_ than a bzImage kernel.
Others have stated this.
Quoted 1 line
You should realize that use of zImage kernels detucts 100 points off your IQ.
I was trying to do comparisions between the 2. I would not have cared as long as 1) it was smaller and 2) it worked.
Maybe they should deduct 100 off whoever is keeping zImage target still in the make files.
Quoted 1 line
Jeez... Is it just me or is it that most people today are too fucking retarded to use a computer?
Uh, excuse me?! I ask a question and you have to do this?! Really, you are of no help to me.
Quoted 8 lines
--
Lab tests show that use of micro$oft causes cancer in lab animals
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
sleekfreak pirate broadcast
http://sleekfreak.ath.cx:81/
Quoted 5 lines · shogunx
On Tue, 3 May 2005, Wakko Warner wrote:
On an interesting side note, when running linux on IBM rs/6000, which is a ppc64 machine, one must use a zImage kernel dd'ed into a small PReP partition to boot the machine... bzImage kernels will not work.
Some time ago, I thought they decided to make zImage = bzImage. That was going through my mind when I tried "make zImage" and was actually surprised it didn't work.
So I guess for some arches (x86 in this case) they could either make zImage = bzImage or just remove it. Although I'm not sure how many people actually try it anymore =)
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
Followup to: <[email protected]> By author: shogunx <[email protected]> In newsgroup: linux.dev.kernel
Quoted 7 lines · Wakko Warner
On an interesting side note, when running linux on IBM rs/6000, which is a ppc64 machine, one must use a zImage kernel dd'ed into a small PReP partition to boot the machine... bzImage kernels will not work.
zImage/bzImage probably means something completely different on ppc.
-hpa
On Tue, 3 May 2005 18:19:22 -0400 Wakko Warner wrote:
| Randy.Dunlap wrote: | > On Tue, 3 May 2005 12:33:43 -0400 Wakko Warner wrote: | > | Yes, I do recall it says "System is 724k". zImage failes. bzImage says | > | 724k as well and succeeds. | > | > The image size needs to be <= 0x7f000 (520192 bytes, 508 KB). | > | > (No, I don't know why, just that this is what is being | > enforced.) | > | > Just cut more out of the kernel image... | | Any suggestions? All that I know of that is modularizable is a module, | except for keyboard, ext2, unix sockets, ramdisk+initrd. Some of the options I need since | this is supposed to support all relevent hardware that we use where I work. | (all scsi,ide,sata,raid cards,ethernet cards that we have)
Are those (mostly) modular?
Is this supposed to be a kernel that is used on a regular basis, not just a temporary quick boot thing?
You want one kernel that handles many configurations but fits in < 510 KB? That is aggressive. :)
I think of this as being a custom kernel, but it sounds like you want a very general-purpose (small) one.
| Hmm, I did find one I forgot. CONFIG_MII. | | EXPERIMENTAL=y | CLEAN_COMPILE=y | BROKEN_ON_SMP=y
Do you need some drivers etc. that are EXPERIMENTAL or BROKEN? Just curious.
| ACPI=y | ACPI_BOOT=y | ACPI_INTERPRETER=y | ACPI_BUS=y | ACPI_EC=y | ACPI_POWER=y | ACPI_PCI=y | ACPI_SYSTEM=y
so some systems may need ACPI ?
| ISA=y | CARDBUS=y | PCMCIA_PROBE=y
some systems have ISA? some are PCMCIA/CardBus?
| PNP=y
| ISAPNP=y
and ISA PNP? :(
| SCSI_PROC_FS=y
drop this one
| AIC7XXX_DEBUG_ENABLE=y | AIC7XXX_REG_PRETTY_PRINT=y | AIC79XX_DEBUG_ENABLE=y | AIC79XX_REG_PRETTY_PRINT=y
drop these.
| SOUND_GAMEPORT=y
drop.
| VT=y | VT_CONSOLE=y | HW_CONSOLE=y | VGA_CONSOLE=y | DUMMY_CONSOLE=y
drop that ^^^^^
| USB_ARCH_HAS_HCD=y | USB_ARCH_HAS_OHCI=y | USB_DEVICEFS=y | USB_OHCI_LITTLE_ENDIAN=y | USB_STORAGE_FREECOM=y | USB_STORAGE_ISD200=y | USB_STORAGE_DPCM=y | USB_STORAGE_USBAT=y | USB_STORAGE_SDDR09=y | USB_STORAGE_SDDR55=y | USB_STORAGE_JUMPSHOT=y | USB_HIDINPUT=y | USB_ALI_M5632=y | USB_AN2720=y | USB_BELKIN=y | USB_GENESYS=y | USB_NET1080=y | USB_PL2301=y | USB_KC2190=y | USB_ARMLINUX=y | USB_EPSON2888=y | USB_ZAURUS=y | USB_CDCETHER=y | USB_AX8817X=y | EXT2_FS=y | JOLIET=y | UDF_NLS=y | NTFS_RW=y
drop NTFS (you didn't list it as a requirement :)
| PROC_FS=y | SYSFS=y | TMPFS=y | RAMFS=y | NFS_V3=y | LOCKD_V4=y | MSDOS_PARTITION=y | DEBUG_KERNEL=y | MAGIC_SYSRQ=y | CRYPTO=y
drop ^^^^^
so what's the problem with using a bzImage kernel?
---
~Randy
Quoted 19 lines · Randy.Dunlap
On Tue, 3 May 2005 18:19:22 -0400 Wakko Warner wrote:
| Randy.Dunlap wrote: | > On Tue, 3 May 2005 12:33:43 -0400 Wakko Warner wrote: | > | Yes, I do recall it says "System is 724k". zImage failes. bzImage says | > | 724k as well and succeeds. | > | > The image size needs to be <= 0x7f000 (520192 bytes, 508 KB). | > | > (No, I don't know why, just that this is what is being | > enforced.) | > | > Just cut more out of the kernel image... | | Any suggestions? All that I know of that is modularizable is a module, | except for keyboard, ext2, unix sockets, ramdisk+initrd. Some of the options I need since | this is supposed to support all relevent hardware that we use where I work. | (all scsi,ide,sata,raid cards,ethernet cards that we have)
Quoted 1 line
Are those (mostly) modular?
Yes.
Quoted 2 lines
Is this supposed to be a kernel that is used on a regular basis, not just a temporary quick boot thing?
I'd say it would be used frequently, but short lived.
Quoted 2 lines
You want one kernel that handles many configurations but fits in < 510 KB? That is aggressive. :)
=) hehe, if I can.
Quoted 2 lines
I think of this as being a custom kernel, but it sounds like you want a very general-purpose (small) one.
Yes, very custom.
Quoted 8 lines
| Hmm, I did find one I forgot. CONFIG_MII. | | EXPERIMENTAL=y | CLEAN_COMPILE=y | BROKEN_ON_SMP=yDo you need some drivers etc. that are EXPERIMENTAL or BROKEN? Just curious.
Actually, not sure, I've always enabled that.
Quoted 9 lines
| ACPI=y | ACPI_BOOT=y | ACPI_INTERPRETER=y | ACPI_BUS=y | ACPI_EC=y | ACPI_POWER=y | ACPI_PCI=y | ACPI_SYSTEM=yso some systems may need ACPI ?
I wanted to beable to query battery life on laptops that I use this on. I can remove it I think, all ACPI that can be a module is. I don't think it works that way though. I'll have to check it on a laptop.
Quoted 4 lines
| ISA=y | CARDBUS=y | PCMCIA_PROBE=ysome systems have ISA? some are PCMCIA/CardBus?
Yes, however, pcmcia is modular.
Quoted 3 lines
| PNP=y
| ISAPNP=y
and ISA PNP? :(
We have some old ISA cards that support PNP (3c509 comes to mind)
Quoted 8 lines
| SCSI_PROC_FS=y
drop this one| AIC7XXX_DEBUG_ENABLE=y | AIC7XXX_REG_PRETTY_PRINT=y | AIC79XX_DEBUG_ENABLE=y | AIC79XX_REG_PRETTY_PRINT=ydrop these.
All SCSI is a module, these I assume are just capabilites in the modules.
Quoted 2 lines
| SOUND_GAMEPORT=y
drop.
Couldn't find a configure option to disable this. It caught my eye too. I don't have gameport in input configured.
Quoted 6 lines
| VT=y | VT_CONSOLE=y | HW_CONSOLE=y | VGA_CONSOLE=y | DUMMY_CONSOLE=ydrop that ^^^^^
All of those or DUMMY_CONSOLE?
Quoted 28 lines
| USB_ARCH_HAS_HCD=y | USB_ARCH_HAS_OHCI=y | USB_DEVICEFS=y | USB_OHCI_LITTLE_ENDIAN=y | USB_STORAGE_FREECOM=y | USB_STORAGE_ISD200=y | USB_STORAGE_DPCM=y | USB_STORAGE_USBAT=y | USB_STORAGE_SDDR09=y | USB_STORAGE_SDDR55=y | USB_STORAGE_JUMPSHOT=y | USB_HIDINPUT=y | USB_ALI_M5632=y | USB_AN2720=y | USB_BELKIN=y | USB_GENESYS=y | USB_NET1080=y | USB_PL2301=y | USB_KC2190=y | USB_ARMLINUX=y | USB_EPSON2888=y | USB_ZAURUS=y | USB_CDCETHER=y | USB_AX8817X=y | EXT2_FS=y | JOLIET=y | UDF_NLS=y | NTFS_RW=y
Quoted 1 line
drop NTFS (you didn't list it as a requirement :)
All USB are modules, NTFS is a module (yes I need it)
Quoted 11 lines
| PROC_FS=y | SYSFS=y | TMPFS=y | RAMFS=y | NFS_V3=y | LOCKD_V4=y | MSDOS_PARTITION=y | DEBUG_KERNEL=y | MAGIC_SYSRQ=y | CRYPTO=ydrop ^^^^^
Crypto is required by one of the wireless drivers (MADWIFI I believe)
Quoted 1 line
so what's the problem with using a bzImage kernel?
Nothing, I wanted to see if zImage would be smaller. As others have stated, it's not. However, I did not know this.
I do appriate your time in helping me. I'm real close to getting this on a single floppy (if I formatted to 1.7mb, it would be easy. I know some of our systems that I would need this on can't use these). One goal is to use the same kernel for all booting.
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
On Tue, 3 May 2005 19:05:32 -0400 Wakko Warner wrote:
| Randy.Dunlap wrote: | > On Tue, 3 May 2005 18:19:22 -0400 Wakko Warner wrote: | > | > | Randy.Dunlap wrote: | > | > On Tue, 3 May 2005 12:33:43 -0400 Wakko Warner wrote: | > | > | Yes, I do recall it says "System is 724k". zImage failes. bzImage says | > | > | 724k as well and succeeds. | > | > | > | > The image size needs to be <= 0x7f000 (520192 bytes, 508 KB). | > | > | > | > (No, I don't know why, just that this is what is being | > | > enforced.) | > | > | > | > Just cut more out of the kernel image... | > | | > | Any suggestions? All that I know of that is modularizable is a module, | > | except for keyboard, ext2, unix sockets, ramdisk+initrd. Some of the options I need since | > | this is supposed to support all relevent hardware that we use where I work. | > | (all scsi,ide,sata,raid cards,ethernet cards that we have) | > | > Are those (mostly) modular? | | Yes. | | > Is this supposed to be a kernel that is used on a regular basis, | > not just a temporary quick boot thing? | | I'd say it would be used frequently, but short lived. | | > You want one kernel that handles many configurations but fits | > in < 510 KB? That is aggressive. :) | | =) hehe, if I can. | | > I think of this as being a custom kernel, but it sounds | > like you want a very general-purpose (small) one. | | Yes, very custom. | | | > | SCSI_PROC_FS=y | > drop this one | > | > | AIC7XXX_DEBUG_ENABLE=y | > | AIC7XXX_REG_PRETTY_PRINT=y | > | AIC79XX_DEBUG_ENABLE=y | > | AIC79XX_REG_PRETTY_PRINT=y | > drop these. | | All SCSI is a module, these I assume are just capabilites in the modules.
OK.
| > | SOUND_GAMEPORT=y | > drop. | | Couldn't find a configure option to disable this. It caught my eye too. I | don't have gameport in input configured.
OK, probably hidden.
| > | VT=y | > | VT_CONSOLE=y | > | HW_CONSOLE=y | > | VGA_CONSOLE=y | > | DUMMY_CONSOLE=y | > drop that ^^^^^ | | All of those or DUMMY_CONSOLE?
I meant just DUMMY_CONSOLE.
| | > so what's the problem with using a bzImage kernel? | | Nothing, I wanted to see if zImage would be smaller. As others have stated, | it's not. However, I did not know this. | | I do appriate your time in helping me. I'm real close to getting this on a | single floppy (if I formatted to 1.7mb, it would be easy. I know some of | our systems that I would need this on can't use these). One goal is to use | the same kernel for all booting.
Good luck, have fun.
---
~Randy
Followup to: <[email protected]> By author: "Randy.Dunlap" <[email protected]> In newsgroup: linux.dev.kernel
Quoted 9 lines
| | Yes, I do recall it says "System is 724k". zImage failes. bzImage says | 724k as well and succeeds.The image size needs to be <=
0x7f000(520192 bytes, 508 KB).(No, I don't know why, just that this is what is being enforced.)
Because that's the size of the hole that a zImage has to fit inside.
WTF is someone using zImage still?
-hpa
Quoted 2 lines · Wakko Warner
x86. Does zImage work on other arches? (I've only ever dealt with alpha and sparc other than x86)
Sure, ARM for example. 2 MB is not a problem.
Signature · 1 line
Krzysztof Halasa
Followup to: <[email protected]> By author: Krzysztof Halasa <[email protected]> In newsgroup: linux.dev.kernel
Quoted 7 lines
Quoted 2 lines · Wakko Warner
x86. Does zImage work on other arches? (I've only ever dealt with alpha and sparc other than x86)
Sure, ARM for example. 2 MB is not a problem.
That's a completely different meaning of zImage then. The x86 boot protocol (also used on x86-64) only allows 504K for zImage.
For x86, zImage is so dead it's not even funny. I tried to remove it a few years ago but people complained.
-hpa
Quoted 1 line · Wakko Warner
Is it possible to use zImage on 2.6 kernels or is bzImage required?
Why do you need the zImage anyway? Maybe there is another way around the problem you are having. Can you post what you are trying to do (end goal) ?
Signature · 4 lines
Richard Warner Lead Systems Integrator Microway, Inc (508)732-5517
Please keep me CCd
Quoted 4 lines · Rick Warner
Quoted 1 line · Wakko Warner
Is it possible to use zImage on 2.6 kernels or is bzImage required?
Why do you need the zImage anyway? Maybe there is another way around the problem you are having. Can you post what you are trying to do (end goal) ?
This is a little project I'm doing to beable to load a system onto a hard drive. The linux system is short lived by design and will run out of a tmpfs root populated by various tgz files found either on CDs or a USB stick.
My goal (which I realize may not be achivable nor is it important in the long run) is to get the kernel and the initrd onto a single floppy disk (Currently, I'm ~80kb too large for this).
I decided (remembering 2.2 days and prior when zImage was normally used) to try zImage to see what happened. I was going to compare the size of the resulting images. That's when I hit the problem.
I understand that upx can compress the kernel better and I also remember hearing about utilizing bzip2 as the compressor for the kernel and initrd images.
As far as my question, it still stands. Is bzImage required (i386/x86) for a 2.6 kernel?
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
Quoted 13 lines · Wakko Warner
This is a little project I'm doing to beable to load a system onto a hard drive. The linux system is short lived by design and will run out of a tmpfs root populated by various tgz files found either on CDs or a USB stick.
My goal (which I realize may not be achivable nor is it important in the long run) is to get the kernel and the initrd onto a single floppy disk (Currently, I'm ~80kb too large for this).
I decided (remembering 2.2 days and prior when zImage was normally used) to try zImage to see what happened. I was going to compare the size of the resulting images. That's when I hit the problem.
Quoted 6 lines
I understand that upx can compress the kernel better and I also remember hearing about utilizing bzip2 as the compressor for the kernel and initrd images.
As far as my question, it still stands. Is bzImage required (i386/x86) for a 2.6 kernel?
Due to the 640k base memory limitations, you need to use bzImage for any kernel that is over about 500k compressed. There is absolutely no reason I can think of for not using bzImage. All the boot loaders support it just fine, and the result is the same after loading. It doesn't change the size of the kernel, just how large a kernel the boot loader can load.
With the size of 2.6 kernels I consider zImage imposible to use anymore, and it has never caused me any trouble to use bzImage. It seems that practically bzImage is requried on x86 for 2.6 kernels. I don't know how small you could make it if you left out everything except initrd and cramfs support (assuming your kernel supports cramfs initrd's). Even ext2 is rather big.
Len Sorensen
Quoted 24 lines · Wakko Warner
Please keep me CCd
Quoted 5 lines · Rick Warner
Quoted 1 line · Wakko Warner
Is it possible to use zImage on 2.6 kernels or is bzImage required?
Why do you need the zImage anyway? Maybe there is another way around the problem you are having. Can you post what you are trying to do (end goal) ?
This is a little project I'm doing to beable to load a system onto a hard drive. The linux system is short lived by design and will run out of a tmpfs root populated by various tgz files found either on CDs or a USB stick.
My goal (which I realize may not be achivable nor is it important in the long run) is to get the kernel and the initrd onto a single floppy disk (Currently, I'm ~80kb too large for this).
I decided (remembering 2.2 days and prior when zImage was normally used) to try zImage to see what happened. I was going to compare the size of the resulting images. That's when I hit the problem.
Quoted 7 lines
I understand that upx can compress the kernel better and I also remember hearing about utilizing bzip2 as the compressor for the kernel and initrd images.
As far as my question, it still stands. Is bzImage required (i386/x86) for a 2.6 kernel?
More or less yes. As you're finding out, it's very difficult to build a functioning 2.6 kernel that fits the size requirements of the zImage format. Really, the zImage format is not needed anymore. It was only kept around because a small number of ancient BIOSes failed to load the bzImage format with the now defunct floppy boot block. There is no size difference in the resulting zImage or bzImage, only the load address is different.
--
Brian Gerst
Quoted 6 lines · Brian Gerst
Quoted 4 lines · Wakko Warner
Please keep me CCd
As far as my question, it still stands. Is bzImage required (i386/x86) for a 2.6 kernel?
Quoted 7 lines
More or less yes. As you're finding out, it's very difficult to build a functioning 2.6 kernel that fits the size requirements of the zImage format. Really, the zImage format is not needed anymore. It was only kept around because a small number of ancient BIOSes failed to load the bzImage format with the now defunct floppy boot block. There is no size difference in the resulting zImage or bzImage, only the load address is different.
Ok, thanks. Definately wanted to know this. The kernel will always be loaded by some boot loader (be it grub or syslinux)
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
Quoted 23 lines · Wakko Warner
Please keep me CCd
Quoted 6 lines · Rick Warner
Quoted 1 line · Wakko Warner
Is it possible to use zImage on 2.6 kernels or is bzImage required?
Why do you need the zImage anyway? Maybe there is another way around the problem you are having. Can you post what you are trying to do (end goal) ?
This is a little project I'm doing to beable to load a system onto a hard drive. The linux system is short lived by design and will run out of a tmpfs root populated by various tgz files found either on CDs or a USB stick.
My goal (which I realize may not be achivable nor is it important in the long run) is to get the kernel and the initrd onto a single floppy disk (Currently, I'm ~80kb too large for this).
I decided (remembering 2.2 days and prior when zImage was normally used) to try zImage to see what happened. I was going to compare the size of the resulting images. That's when I hit the problem.
Quoted 6 lines
I understand that upx can compress the kernel better and I also remember hearing about utilizing bzip2 as the compressor for the kernel and initrd images.
As far as my question, it still stands. Is bzImage required (i386/x86) for a 2.6 kernel?
As others have mentioned, bzImage seems to be a requirement now for x86. However, zImage will not do any better for you. I recall doing testing of zImage vs bzImage a long time back, and the bzImage kernels were slightly smaller than the zImage ones anyway. I think you're going to be out of luck trying to get your kernel that small. A single floppy boot/root disk isn't really possible with 2.6 kernels anymore. Have you looked into pxe booting instead? I work at a cluster company and we do tons of pxe/network booting stuff.
Signature · 4 lines
Richard Warner Lead Systems Integrator Microway, Inc (508)732-5517
Quoted 11 lines · Rick Warner
Quoted 1 line · Wakko Warner
Please keep me CCd
As others have mentioned, bzImage seems to be a requirement now for x86. However, zImage will not do any better for you. I recall doing testing of zImage vs bzImage a long time back, and the bzImage kernels were slightly smaller than the zImage ones anyway. I think you're going to be out of luck trying to get your kernel that small. A single floppy boot/root disk isn't really possible with 2.6 kernels anymore. Have you looked into pxe booting instead? I work at a cluster company and we do tons of pxe/network booting stuff.
Not all machines are PXE capable. The boot will be generally CDrom or USB stick. I wanted to continue to support our machines that are not capable of booting from either of these (which all of these are not PXE capable)
I might beable to pull this off, I don't know yet. If it wasn't for all the modules I have placed in the initrd, I could. (I could remove one of the modules and it would fit just fine but I might actually need that module)
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals
Followup to: <[email protected]> By author: Wakko Warner <[email protected]> In newsgroup: linux.dev.kernel
Quoted 5 lines
Not all machines are PXE capable. The boot will be generally CDrom or USB stick. I wanted to continue to support our machines that are not capable of booting from either of these (which all of these are not PXE capable)
You can stick a recent version of Etherboot on your CD-ROM or USB stick and use that as your PXE stack.
-hpa
Quoted 1 line
Is it possible to use zImage on 2.6 kernels or is bzImage required?
I appreciate everyone's help that replied to me. I have my "stage1" running entirely off of 1 floppy with 2.6.12-rc2!
Signature · 1 line
Lab tests show that use of micro$oft causes cancer in lab animals