Skip to contentSkip to conversation

Billionton bluetooth USB: how to make it work

DISCUSSION Pavel Machek 3 participants 3 messages May 14, 2005 5 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): 1115942337.18499.86.camel@pegasus

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): 1115975517.18499.100.camel@pegasus

A message that is not in the archive (sent off-list or not yet received): [email protected]

#5 lore raw

Hi!

Okay, so the magic sequence seems to be:

# Take 2.6.12-rc3-mm3
#
# PCMCIA config:

# card "Cyber-blue Compact Flash Card"
#   manfid 0x0279, 0x950b
#   bind "serial_cs"
#
killall hciattach
sleep .1
setserial /dev/ttyS4 baud_base 921600
hciattach -s 921600 /dev/ttyS4 bcsp
hciconfig
hciconfig hci0 up
hciconfig

It took me a hour trying to debug weird stuff before I realized that I need to do hciconfig up... to see some results...

Pavel

Signature · 1 line
Boycott Kodak -- for their patent abuse against Java.
#6 lore raw

Hi Pavel,

I have no idea what USB have to do with it and why you posted it to LKML, but it seems you got it.

Quoted 5 lines

Okay, so the magic sequence seems to be:

# Take 2.6.12-rc3-mm3
#
# PCMCIA config:

Quoted 11 lines
# card "Cyber-blue Compact Flash Card"
#   manfid 0x0279, 0x950b
#   bind "serial_cs"
#
killall hciattach
sleep .1
setserial /dev/ttyS4 baud_base 921600
hciattach -s 921600 /dev/ttyS4 bcsp
hciconfig
hciconfig hci0 up
hciconfig

Verfied with my card and a 2.6.12-rc4.

hci0: Type: UART
BD Address: 00:10:60:xx:xx:xx ACL MTU: 192:8 SCO MTU: 64:8 HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver: 0x33c
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <power control> <transparent SCO>
HCI 16.14
Chip version: BlueCore02-External
Max key size: 56 bit
SCO mapping: HCI

Quoted 2 lines

It took me a hour trying to debug weird stuff before I realized that I need to do hciconfig up... to see some results...

Or make sure that hcid is running. It will bring up your device.

Regards

Marcel

#7 lore raw

Re: Billionton bluetooth CF: how to make it work

Hi!

Quoted 2 lines

I have no idea what USB have to do with it and why you posted it to LKML, but it seems you got it.

Oops, that was typo, I meant "Billionton bluetooth CF". I posted lkml so that it gets archived on easy-to-search place.

Quoted 17 lines
Quoted 5 lines

Okay, so the magic sequence seems to be:

# Take 2.6.12-rc3-mm3
#
# PCMCIA config:

Quoted 11 lines
# card "Cyber-blue Compact Flash Card"
#   manfid 0x0279, 0x950b
#   bind "serial_cs"
#
killall hciattach
sleep .1
setserial /dev/ttyS4 baud_base 921600
hciattach -s 921600 /dev/ttyS4 bcsp
hciconfig
hciconfig hci0 up
hciconfig
Quoted 1 line

Verfied with my card and a 2.6.12-rc4.

Good. [Actually it does *not* work for me in -rc4, but it seems to be pcmcia problem.]

Quoted 15 lines

hci0: Type: UART
BD Address: 00:10:60:xx:xx:xx ACL MTU: 192:8 SCO MTU: 64:8 HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver: 0x33c
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <power control> <transparent SCO>
HCI 16.14
Chip version: BlueCore02-External
Max key size: 56 bit
SCO mapping: HCI

Quoted 4 lines
Quoted 2 lines

It took me a hour trying to debug weird stuff before I realized that I need to do hciconfig up... to see some results...

Or make sure that hcid is running. It will bring up your device.

Yes, I was just confused. I'm normally only starting hcid just before talking to the phone, and I did not try it when I was BD address of all zeros.
Pavel

Signature · 1 line
Boycott Kodak -- for their patent abuse against Java.