Skip to contentSkip to conversation

PROBLEM: error on handling I/O ports

DISCUSSION giskard 1 participant 1 message May 13, 2005

lore
Share & tools
lore

giskard

author
#0 lore raw
Quoted 1 line

Could you just try acpi=off ?

pcmcia seems work with acpi=off but obviously battery and cpu scaling are not supported. any hint?

Quoted 30 lines · giskard

hi all,

The 2.6.* kernel doesn't seems to handle properly the I/O ports for devices.

I bought a toshiba satellite a80-111 and with 2.4 series all devices work good, with 2.6 series i get some errors:

- the 2.4 kernel uses ide-generic (with sata support) for use the hd, with 2.6 i need libata SATA support because i get this error

ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe

- i have a 0000:06:04.0 CardBus bridge: Texas Instruments Texas Instruments PCIxx21/ x515 Cardbus Controller

i can get it work with the 2.4 series with no problem (yenta socket), the 2.6 series uses also yenta sockets but when i start pcmcia service (/ etc/ init.d/pcmcia start) the kernel freezes when
it checks the i/o ports.

mrspurr:/usr/src/linux# uname -a
Linux mrspurr 2.6.11.7 #12 Mon Apr 18 01:51:04 CEST 2005 i686 GNU/
Linux

i attached lspci -vvv log, iomem log, ioports log, cpuinfo log

thank you in advance

Signature · 3 lines
ciao giskard

spero nel ritorno del grande bastardo.