New shaping program - ist-shaper
Hi al..
I just write program that helps to configure tc with HTB and iptables CLASS extension.
Its written in perl and uses Apache like config files.
Program can be found on http://sourceforge.net/projects/ist-shaper/ or
http://www.ingwar.eu.org/ist-shaper/
In few days will be new version with time aware rules.
The simply config file looks like this.
############################################################################
###
# It's a simple example of a config file for Ist Shaper
# It only prioritizes outgoing traffic on interface eth0 (128Kbit bandwidth)
# by source and destination port. # # +--------------------------------------------------------------------------+ # | htb 1:1 128Kbit | # +------------------------+------------------------+------------------------+ # | htb 1:10 96Kbit prio 1 | htb 1:10 64Kbit prio 2 | htb 1:10 32Kbit prio 3 | # +------------------------+------------------------+------------------------+ # | ssh/telnet/dns | http/https/pop3/smtp | rest | # +------------------------+------------------------+------------------------+ # # Root rule (htb 1:1) divides into 3 classess, each allocating part of total # bandwidth (96Kbit, 64Kbit, 32Kbit). # # More complex and working example can by found in file complex.conf # ############################################################################ ###
# location of log file Log_file = /var/log/ist.log
# use RETURN target for each rule in class to avoid re-classifing of packets # generaly it's good idea Return_Rules = 1
############################################################################
###
# interfaces ############################################################################ ###
# outgoing interface (128Kbit)
<Device eth0>
# Total bandwidth for a device (default 128Kbit)
Rate = 128Kbit # default class for qdisc, it is used only if NO OTHER rule will match.
# It should be empty, used only by tc
Default = 30###########################################################################
# classes
###########################################################################
# Highest priority rule, for interactive sessions, like SSH/telnet/etc
<Class 10>
Rate = 96Kbit
Prio = 1
Rule = -p tcp --source-port ssh
Rule = -p tcp --destination-port ssh
Rule = -p tcp --source-port telnet
Rule = -p tcp --destination-port telnet
Rule = -p udp --source-port domain
Rule = -p udp --destination-port domain
</Class>
# Next rule for services that need some bandwidth, but not so demanding
# as interactive sessions (like www browsing... you wouldn't notice
# page being loaded 0.5 second longer, but in SSH you would)
<Class 20>
Rate = 64Kbit
Prio = 2
Rule = -p tcp --source-port http
Rule = -p tcp --destination-port http
Rule = -p tcp --source-port https
Rule = -p tcp --destination-port https
Rule = -p tcp --source-port pop3s
Rule = -p tcp --destination-port pop3s
Rule = -p tcp --source-port smtp
Rule = -p tcp --destination-port smtp
</Class>
# all of the rest.... (of corse you could add more classes, look for
them in
# complex.conf example)
# This class is default one (See line above defining "Default"), it is
not
# defined in iptables, used only in tc.
<Class 30>
Rate = 32Kbit
Prio = 3
</Class>
</Device>Signature · 8 lines
Lemmings don't grow older, they just die. _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc