Need some help
Hi all, I have read the larc howto and I need to apply a traffic shaper with this configuration:
router / two interface etho and eth1
lan
lan is on eth1 and on eth0 I've the dsl connection (1.2 Mbit / 256 kbit)
I need to limit the bandwith towards lan and I've thought at HTB and tcng. I write the script belove. I want limit the p2p and ftp (ssh and irc) connection at 15 kBps (128 kbps) and the other type of traffic at 32 kBps (256kbps). Is the script right?
Moreover I want understand better how htb work: I can shape the traffic router->lan but I can't shape traffic lan->router, is it right? In this way I can limit the bandwidht towards lan, but I have the bandwith towards router always full.
Thanks
P.S.: sorry for my very bad english :)
############# script #########
/*
*Simply tcng traffic control file.
*/
#define INTERFACE eth1
dev INTERFACE {
egress {
class( <$p2p> )
if tcp_sport = 4662
if udp_sport = 4672
if udp_sport = 4666
if tcp_sport = 6882
if tcp_sport = 6346
class ( <$ftp> )
if tcp_sport = 21
if tcp_sport = 22 || ip_tos_delay = 1
if tcp_sport = 6667 || tcp_dport = 7000;
class ( <$def> )
if 1 ;
htb () {
class ( rate 256kbps, ceil 256kbps ) {
$p2p = class ( rate 56kbps, ceil 128kbps ) { sfq; } ;
$ftp = class ( rate 56kbps, ceil 128kbps ) { sfq; } ;
$def = class ( rate 256kbps, ceil 256kbps ) { sfq; } ;
}
}
}
}##############################
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
Digitalpix: Il metodo più comodo, veloce e conveniente
* per stampare le tue foto digitali migliori.
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid23&d-5
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi..
Quoted 11 lines
Hi all, I have read the larc howto and I need to apply a traffic shaper with this configuration:
router / two interface etho and eth1
lan
lan is on eth1 and on eth0 I've the dsl connection (1.2 Mbit / 256 kbit)
Thats most common config.. (same as mine)
Quoted 10 lines
I need to limit the bandwith towards lan and I've thought at HTB and tcng. I write the script belove. I want limit the p2p and ftp (ssh and irc) connection at 15 kBps (128 kbps) and the other type of traffic at 32 kBps (256kbps). Is the script right?
Moreover I want understand better how htb work: I can shape the trafficrouter->lanbut I can't shape trafficlan->router, is it right? In this way I can limit the bandwidht towards lan, but I have the bandwith towards router always full.
You can shape from lan to router but only In ingress qdisc what is not a good idea.
If you want prevent your lan users from uploading too much you can limit your outgoing traffic on dev eth0.
Quoted 58 lines
Thanks
P.S.: sorry for my very bad english :)############# script #########
/*
*Simply tcng traffic control file.*/
#define INTERFACE eth1
dev INTERFACE { egress { class( <$p2p> ) if tcp_sport = 4662 if udp_sport = 4672 if udp_sport = 4666 if tcp_sport = 6882 if tcp_sport = 6346 class ( <$ftp> ) if tcp_sport = 21 if tcp_sport = 22 || ip_tos_delay = 1 if tcp_sport = 6667 || tcp_dport = 7000; class ( <$def> ) if 1 ; htb () { class ( rate 256kbps, ceil 256kbps ) { $p2p = class ( rate 56kbps, ceil 128kbps ) { sfq; } ; $ftp = class ( rate 56kbps, ceil 128kbps ) { sfq; } ; $def = class ( rate 256kbps, ceil 256kbps ) { sfq; } ; } } } }##############################
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/fSponsor:
Digitalpix: Il metodo piy comodo, veloce e conveniente
* per stampare le tue foto digitali migliori.
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid23&d-5
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 8 lines
Traffic shaper using iptables and tc-HTB. Ist-shaper (http://sourceforge.net/projects/ist-shaper/) _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc