Skip to contentSkip to conversation

EDR support?

Bluez-users Frank Pieczynski 3 participants 4 messages May 14, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hello,
I just installed a Dell Latitude X1 notebook with Gentoo Linux and BlueZ. A Dell "TrueMobile 350" BT device is built in (lsusb shows this as id 413c:8103).
I was able to successful connect a Blutooth notebook mouse by "hama". But I wonder if this modul is a real BT 2.0 device with EDR (according to the Bluetooth database on heise.de it is such device).

This is the output of 'hciconfig -a'
hci0: Type: USB

	BD Address: 00:10:C6:63:03:74 ACL MTU: 384:8 SCO MTU: 64:8
	UP RUNNING PSCAN ISCAN 
	RX bytes:18036 acl:899 sco:0 events:399 errors:0
	TX bytes:3320 acl:118 sco:0 commands:67 errors:0
	Features: 0xff 0xff 0x9f 0xfe 0x9b 0xf9 0x00 0x80
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH HOLD SNIFF PARK 
	Link mode: SLAVE ACCEPT 
	Name: 'BlueZ (0)'
	Class: 0x3e0100
	Service Classes: Networking, Rendering, Capturing
	Device Class: Computer, Uncategorized
	HCI Ver: 1.2 (0x2) HCI Rev: 0x679 LMP Ver: 1.2 (0x2) LMP Subver: 0x679
	Manufacturer: Cambridge Silicon Radio (10)

Is that a BT 2.0 capable device?

Thank you for your help!
Frank

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#1 lore raw

Dne so 14. kv=ECtna 2005 23:06 Frank Pieczynski napsal(a):

Quoted 5 lines

Hello,
I just installed a Dell Latitude X1 notebook with Gentoo Linux and BlueZ. A Dell "TrueMobile 350" BT device is built in (lsusb shows this as id 413c:8103).
I was able to successful connect a Blutooth notebook mouse by "hama". But=

I

Quoted 5 lines

wonder if this modul is a real BT 2.0 device with EDR (according to the Bluetooth database on heise.de it is such device).

This is the output of 'hciconfig -a'
hci0: Type: USB

Quoted 13 lines
	BD Address: 00:10:C6:63:03:74 ACL MTU: 384:8 SCO MTU: 64:8
	UP RUNNING PSCAN ISCAN
	RX bytes:18036 acl:899 sco:0 events:399 errors:0
	TX bytes:3320 acl:118 sco:0 commands:67 errors:0
	Features: 0xff 0xff 0x9f 0xfe 0x9b 0xf9 0x00 0x80
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
	Link policy: RSWITCH HOLD SNIFF PARK
	Link mode: SLAVE ACCEPT
	Name: 'BlueZ (0)'
	Class: 0x3e0100
	Service Classes: Networking, Rendering, Capturing
	Device Class: Computer, Uncategorized
	HCI Ver: 1.2 (0x2) HCI Rev: 0x679 LMP Ver: 1.2 (0x2) LMP Subver: 0x679

^^^^^^^^^^^^
It is 1.2 device

hciconfig hci0 features
hciconfig hci0 revision

will give you better knowledge about this device

Quoted 6 lines

Manufacturer: Cambridge Silicon Radio (10)

Is that a BT 2.0 capable device?

Thank you for your help!
Frank

Michal

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#2 lore raw
Quoted 11 lines · Michal Semler
Quoted 3 lines

Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x679 LMP Ver: 1.2 (0x2) LMP Subver: 0x679

^^^^^^^^^^^^
It is 1.2 device

hciconfig hci0 features
hciconfig hci0 revision

will give you better knowledge about this device

hciconfig hci0 revision
hci0: Type: USB
BD Address: 00:10:C6:63:03:74 ACL MTU: 384:8 SCO MTU: 64:8 Build 1657
Chip version: BlueCore4-External
Max key size: 128 bit
SCO mapping: HCI

The BlueCore4 is a BT2.0 capable chip, right?

hciconfig hci0 features
hci0: Type: USB
BD Address: 00:10:C6:63:03:74 ACL MTU: 384:8 SCO MTU: 64:8
Features: 0xff 0xff 0x9f 0xfe 0x9b 0xf9 0x00 0x80
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <power control> <transparent SCO> <broadcast encrypt> <EDR ACL 2 Mbps> <EDR ACL 3 Mbps> <enhanced iscan> <interlaced iscan> <interlaced pscan> <inquiry with RSSI> <extended SCO> <EV4 packets> <EV5 packets> <AFH cap. slave> <AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL> <AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps> <EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features>

And it supports EDR, nice.

Thank you for your help,
Frank

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#3 lore raw
In reply to Frank Pieczynski

Hi Frank,

Quoted 24 lines

I just installed a Dell Latitude X1 notebook with Gentoo Linux and BlueZ. A Dell "TrueMobile 350" BT device is built in (lsusb shows this as id 413c:8103).
I was able to successful connect a Blutooth notebook mouse by "hama". But I wonder if this modul is a real BT 2.0 device with EDR (according to the Bluetooth database on heise.de it is such device).

This is the output of 'hciconfig -a'
hci0: Type: USB

	BD Address: 00:10:C6:63:03:74 ACL MTU: 384:8 SCO MTU: 64:8
	UP RUNNING PSCAN ISCAN 
	RX bytes:18036 acl:899 sco:0 events:399 errors:0
	TX bytes:3320 acl:118 sco:0 commands:67 errors:0
	Features: 0xff 0xff 0x9f 0xfe 0x9b 0xf9 0x00 0x80
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH HOLD SNIFF PARK 
	Link mode: SLAVE ACCEPT 
	Name: 'BlueZ (0)'
	Class: 0x3e0100
	Service Classes: Networking, Rendering, Capturing
	Device Class: Computer, Uncategorized
	HCI Ver: 1.2 (0x2) HCI Rev: 0x679 LMP Ver: 1.2 (0x2) LMP Subver: 0x679
	Manufacturer: Cambridge Silicon Radio (10)
Quoted 1 line

Is that a BT 2.0 capable device?

this is the EDR firmware. The only odd thing is that it reports itself as a Bluetooth 1.2 device. I saw the same problem on an Inspiron 6000 some days ago.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users