Skip to contentSkip to conversation

I'm having 4GB RAM, but Linux sees just 3GB???

DISCUSSION Christian Parpart 4 participants 8 messages May 16, 2005 – May 17, 2005

lore
Share & tools
lore
#0 lore raw

Hi all,

I was asking this in gentoo-server mailing list before, however, they finally pointed me to this place as it could also be a bug in the kernel.

I'm having a TYAN board with two AMD Opteron 248 and 4x 1GB ECC RAM on it. The BIOS reflects what I've plugged in, however, the operating system does not.

my uname -a output is:
Linux battousai 2.6.11-gentoo-r8 #1 SMP Sat May 14 02:42:15 CEST 2005 x86_64 AMD Opteron(tm) Processor 248 AuthenticAMD GNU/Linux

and my dmidecode output is located at [0]. For ANY reason, dmidecode even knows about my 4GB RAM, but free -m nor kinfocenter of KDE claims to see just 3GB.

free -m:
total used free shared buffers cached
Mem: 3015 2993 22 0 15 2638
-/+ buffers/cache: 338 2677
Swap: 511 1 510

This is rather sad to see 1GB RAM plugged in for nothing.

Has anyone a hint for my WHY this is happening and HOW I could get rid of it?

Thanks in advance,
Christian Parpart.

[0] http://dev.gentoo.org/~trapni/dmidecode.txt

Signature · 2 lines
Netiquette: http://www.ietf.org/rfc/rfc1855.txt
 15:59:12 up 54 days,  5:05,  0 users,  load average: 0.77, 0.51, 0.41
#1 lore raw
Quoted 17 lines · Christian Parpart

Hi all,

I was asking this in gentoo-server mailing list before, however, they finally pointed me to this place as it could also be a bug in the kernel.

I'm having a TYAN board with two AMD Opteron 248 and 4x 1GB ECC RAM on it. The BIOS reflects what I've plugged in, however, the operating system does not.

my uname -a output is:
Linux battousai 2.6.11-gentoo-r8 #1 SMP Sat May 14 02:42:15 CEST 2005 x86_64 AMD Opteron(tm) Processor 248 AuthenticAMD GNU/Linux

and my dmidecode output is located at [0]. For ANY reason, dmidecode even knows about my 4GB RAM, but free -m nor kinfocenter of KDE claims to see just 3GB.

free -m:
total used free shared buffers cached
Mem: 3015 2993 22 0 15 2638
-/+ buffers/cache: 338 2677
Swap: 511 1 510

Quoted 9 lines

This is rather sad to see 1GB RAM plugged in for nothing.

Has anyone a hint for my WHY this is happening and HOW I could get rid of it?

Thanks in advance,
Christian Parpart.

[0] http://dev.gentoo.org/~trapni/dmidecode.txt

Are you running a 64-bit kernel? What does "dmesg | grep e820" show?

--
Brian Gerst

#2 lore raw
Quoted 29 lines · Brian Gerst
Quoted 28 lines · Christian Parpart

Hi all,

I was asking this in gentoo-server mailing list before, however, they finally pointed me to this place as it could also be a bug in the kernel.

I'm having a TYAN board with two AMD Opteron 248 and 4x 1GB ECC RAM on it. The BIOS reflects what I've plugged in, however, the operating system does not.

my uname -a output is:
Linux battousai 2.6.11-gentoo-r8 #1 SMP Sat May 14 02:42:15 CEST 2005 x86_64 AMD Opteron(tm) Processor 248 AuthenticAMD GNU/Linux

and my dmidecode output is located at [0]. For ANY reason, dmidecode even knows about my 4GB RAM, but free -m nor kinfocenter of KDE claims to see just 3GB.

free -m:
total used free shared buffers cached
Mem: 3015 2993 22 0 15 2638
-/+ buffers/cache: 338 2677
Swap: 511 1 510

This is rather sad to see 1GB RAM plugged in for nothing.

Has anyone a hint for my WHY this is happening and HOW I could get rid of it?

Quoted 6 lines
Quoted 4 lines

Thanks in advance,
Christian Parpart.

[0] http://dev.gentoo.org/~trapni/dmidecode.txt

Are you running a 64-bit kernel? What does "dmesg | grep e820" show?

BIOS-e820: 0000000000000000 - 0000000000094800 (usable)
BIOS-e820: 0000000000094800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff20000 (usable)
BIOS-e820: 00000000bff20000 - 00000000bff2e000 (ACPI data)
BIOS-e820: 00000000bff2e000 - 00000000bff80000 (ACPI NVS)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

hmm... what does this mean?

Well, yeah, the whole system is 64bit compiled.

Regards,
Christian Parpart.

Signature · 2 lines
Netiquette: http://www.ietf.org/rfc/rfc1855.txt
 17:00:30 up 54 days,  6:06,  0 users,  load average: 0.64, 0.45, 0.46
#3 lore raw
Quoted 52 lines · Christian Parpart
Quoted 30 lines · Brian Gerst
Quoted 28 lines · Christian Parpart

Hi all,

I was asking this in gentoo-server mailing list before, however, they finally pointed me to this place as it could also be a bug in the kernel.

I'm having a TYAN board with two AMD Opteron 248 and 4x 1GB ECC RAM on it. The BIOS reflects what I've plugged in, however, the operating system does not.

my uname -a output is:
Linux battousai 2.6.11-gentoo-r8 #1 SMP Sat May 14 02:42:15 CEST 2005 x86_64 AMD Opteron(tm) Processor 248 AuthenticAMD GNU/Linux

and my dmidecode output is located at [0]. For ANY reason, dmidecode even knows about my 4GB RAM, but free -m nor kinfocenter of KDE claims to see just 3GB.

free -m:
total used free shared buffers cached
Mem: 3015 2993 22 0 15 2638
-/+ buffers/cache: 338 2677
Swap: 511 1 510

This is rather sad to see 1GB RAM plugged in for nothing.

Has anyone a hint for my WHY this is happening and HOW I could get rid of it?

Quoted 6 lines
Quoted 4 lines

Thanks in advance,
Christian Parpart.

[0] http://dev.gentoo.org/~trapni/dmidecode.txt

Are you running a 64-bit kernel? What does "dmesg | grep e820" show?

BIOS-e820: 0000000000000000 - 0000000000094800 (usable)
BIOS-e820: 0000000000094800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff20000 (usable)
BIOS-e820: 00000000bff20000 - 00000000bff2e000 (ACPI data)
BIOS-e820: 00000000bff2e000 - 00000000bff80000 (ACPI NVS)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

Quoted 1 line

hmm... what does this mean?

It means that there is a hole at 00000000c0000000 - 0000000100000000 (3GB-4GB) for PCI memory-mapped devices. The 4th GB of RAM should be remapped by the BIOS to 4GB-5GB, but isn't. Your BIOS is either buggy or misconfigured.

--
Brian Gerst

#4 lore raw

(oops)

Quoted 12 lines · Brian Gerst
Quoted 12 lines

BIOS-e820: 0000000000000000 - 0000000000094800 (usable)
BIOS-e820: 0000000000094800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff20000 (usable)
BIOS-e820: 00000000bff20000 - 00000000bff2e000 (ACPI data)
BIOS-e820: 00000000bff2e000 - 00000000bff80000 (ACPI NVS)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

Quoted 6 lines
Quoted 1 line

hmm... what does this mean?

It means that there is a hole at 00000000c0000000 - 0000000100000000 (3GB-4GB) for PCI memory-mapped devices. The 4th GB of RAM should be remapped by the BIOS to 4GB-5GB, but isn't. Your BIOS is either buggy or misconfigured.

Aiiii, that's good news.

I found a "Memhole" area. But I never used to change these items. Unfortunately, my TYAN board reference guide isn't telling me what to change there for good - so - can you tell me where to find more information about there?

If I remember correctly, it provided me the options ("Automatic"/"Manual") and a value list with the following items:
  64MB 128MB, 256MB, 512MB, 1024MB 2048MB, 3G, 3.5G.

and another list I can't remember by now.

but *playing* around with these values didn't help much (I just reduced my memory in linux down to 2GB once but didn't find the right values for getting 4GB).

So, what should I do then?

Best reagrds,
Christian Parpart.

Signature · 2 lines
Netiquette: http://www.ietf.org/rfc/rfc1855.txt
 19:52:02 up 54 days,  8:58,  0 users,  load average: 0.67, 0.64, 0.62
#5 lore raw
Quoted 33 lines · Christian Parpart

(oops)

Quoted 12 lines · Brian Gerst
Quoted 12 lines

BIOS-e820: 0000000000000000 - 0000000000094800 (usable)
BIOS-e820: 0000000000094800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff20000 (usable)
BIOS-e820: 00000000bff20000 - 00000000bff2e000 (ACPI data)
BIOS-e820: 00000000bff2e000 - 00000000bff80000 (ACPI NVS)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

Quoted 6 lines
Quoted 1 line

hmm... what does this mean?

It means that there is a hole at 00000000c0000000 - 0000000100000000 (3GB-4GB) for PCI memory-mapped devices. The 4th GB of RAM should be remapped by the BIOS to 4GB-5GB, but isn't. Your BIOS is either buggy or misconfigured.

Aiiii, that's good news.

I found a "Memhole" area. But I never used to change these items. Unfortunately, my TYAN board reference guide isn't telling me what to change there for good - so - can you tell me where to find more information about there?

If I remember correctly, it provided me the options ("Automatic"/"Manual") and a value list with the following items:
  64MB 128MB, 256MB, 512MB, 1024MB 2048MB, 3G, 3.5G.

Quoted 7 lines

and another list I can't remember by now.

but *playing* around with these values didn't help much (I just reduced my memory in linux down to 2GB once but didn't find the right values for getting 4GB).

So, what should I do then?

You should boot with different BIOS options and examine e820 map after each boot, looking for setup where there is 1 Gig of RAM at 4G mark.

Also google for 'e820' to get some info on this stuff. --
vda

#6 lore raw
In reply to Christian Parpart
Quoted 1 line · Christian Parpart

Has anyone a hint for my WHY this is happening and HOW I could get rid of it?

This is because there is a PCI memory hole of about 1GB of space on the x86_64 platform. Basically it overlays the address space of the RAM that you have.

You can try to enable memory hoisting (it may be called software memory hole in your bios). This will try to remap you RAM above the 4GB boundary so that the PCI space and your RAMs address space do not conflict. Unfortunately, this does not work particularly well...

peter

#7 lore raw
Quoted 4 lines · Peter Buckingham
Quoted 2 lines · Christian Parpart

Has anyone a hint for my WHY this is happening and HOW I could get rid of it?

Quoted 8 lines

This is because there is a PCI memory hole of about 1GB of space on the x86_64 platform. Basically it overlays the address space of the RAM that you have.

You can try to enable memory hoisting (it may be called software memory hole in your bios). This will try to remap you RAM above the 4GB boundary so that the PCI space and your RAMs address space do not conflict. Unfortunately, this does not work particularly well...

Yeah, ("software"/"hardware"/"disabled") has been the other dropdown list in my BIOS (i remember now;) however, it's been 'disabled' as I touched my host first, and playing around didn't help *yet". although here, the BIOS reference book just didn't talk about this area either.

I'll try once again, thx all ;)

Regards,
Christian Parpart.

Signature · 2 lines
Netiquette: http://www.ietf.org/rfc/rfc1855.txt
 19:59:46 up 54 days,  9:06,  0 users,  load average: 0.66, 0.61, 0.61