Skip to contentSkip to conversation

Change HTB "final qdisc" of the default walk-throught class

LARTC Robert Siemer 2 participants 2 messages May 22, 2005

lore
Share & tools
lore
#0 lore raw

Hello everybody!

With a HTB qdisc:

# tc qdisc add dev eth0 root handle 99: htb

How can I change the "final qdisc" of the default walk-throught class?

# tc qdisc add dev eth0 parent 99:0 handle 88: sfq
results in: "RTNETLINK answers: Invalid argument"

CBQ automatically creates a xx:0 root class where I can attach final qdiscs... - If there is a root class in htb, how is it named?

This is a check of my understanding. - I don't need a solution of the problem (e.g. with a leaf default class). - I need an answer to my question and if it is not possible, the answer is: it's not possible... (-:

Thanks,
Robert
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

Re: [LARTC] Change HTB "final qdisc" of the default walk-throught

I think you can add a default class to your htb root-qdisc. As example

# tc qdisc add dev eth0 root handle 99: htb default 30
# tc class add dev eth0 parent 1:1 classid 1:10 htb rate 5mbit burst 15k
# tc class add dev eth0 parent 1:1 classid 1:20 htb rate 3mbit ceil 
6mbit burst 15k
# tc class add dev eth0 parent 1:1 classid 1:30 htb rate 1kbit ceil 
6mbit burst 15k

If the traffic isn't matched by any filter it will get to 1:30

Andreas

Quoted 19 lines · Robert Siemer

Hello everybody!

With a HTB qdisc:

# tc qdisc add dev eth0 root handle 99: htb

How can I change the "final qdisc" of the default walk-throught class?

# tc qdisc add dev eth0 parent 99:0 handle 88: sfq
results in: "RTNETLINK answers: Invalid argument"

CBQ automatically creates a xx:0 root class where I can attach final qdiscs... - If there is a root class in htb, how is it named?

This is a check of my understanding. - I don't need a solution of the problem (e.g. with a leaf default class). - I need an answer to my question and if it is not possible, the answer is: it's not possible... (-:

Quoted 9 lines

Thanks,
Robert
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc