Skip to contentSkip to conversation

DISCUSSION [email protected] 1 participant 1 message May 24, 2005

lore
Share & tools
lore
#0 lore raw
	by smtp.nexlab.net (Postfix) with ESMTP id 0E929FB77

	for <[email protected]>; Tue, 24 May 2005 10:01:48 +0200 (CEST)

Received: ([email protected]) by vger.kernel.org via listexpand

	id S261331AbVEXGbe (ORCPT <rfc822;[email protected]>);

	Tue, 24 May 2005 02:31:34 -0400

Received: ([email protected]) by vger.kernel.org id S261321AbVEXGbe

	(ORCPT <rfc822;linux-kernel-outgoing>);

	Tue, 24 May 2005 02:31:34 -0400

Received: from sccrmhc14.comcast.net ([204.127.202.59]:54738 "EHLO

	sccrmhc14.comcast.net") by vger.kernel.org with ESMTP

	id S261331AbVEXGbY (ORCPT <rfc822;[email protected]>);

	Tue, 24 May 2005 02:31:24 -0400

Received: from [192.168.111.3] (c-24-6-245-209.hsd1.ca.comcast.net[24.6.245.209])

by comcast.net (sccrmhc14) with SMTP

id <2005052406281001400i8unfe>; Tue, 24 May 2005 06:31:24 +0000

Subject: Re: promise sx8 sata driver

From: Kallol Biswas <[email protected]>
Reply-To: [email protected]
To: Jeff Garzik <[email protected]>
Cc: Chris Haumesser <[email protected]>,
[email protected]
In-Reply-To: <[email protected]>

References: <[email protected]> <[email protected]>

Content-Type: text/plain

Organization: NucleoDyne Systems Inc.

Message-Id: <1116909972.15027.3.camel@driver>

Mime-Version: 1.0

X-Mailer: Ximian Evolution 1.2.2 (1.2.2-4)

Date: 23 May 2005 23:16:03 -0700

Content-Transfer-Encoding: 7bit

Sender: [email protected]
Precedence: bulk

X-Mailing-List: [email protected]

How good is 2.6.6 carmel.c driver for sx8 adapters? Does it support the promise adapter? Why have you developed sx8.c?

Quoted 27 lines · Jeff Garzik
Quoted 10 lines · Chris Haumesser

The sx8 driver does not use libata, and it is a separate block device, outside of the scsi and ata hierarchies. If I compile the driver into my kernel, I end up with /dev/sx8/0 and /dev/sx8/0p1, etc. However, no scsi disk devices are created, and grub does not recognize that /dev/sx8/ devices are disks. There's no indication in /proc/scsi/ that they are being registered with the scsi subsystem; this is clearly different from every other sata controller I've used. I've been googling this for days, with no real luck. I have found changelogs for grub that suggest that my version (0.95) should support booting from the sx8.

sx8 is a separate block driver, and has nothing whatsoever to do with scsi.

Quoted 2 lines

So my question is, how does one use this driver for sata disks? Is my problem a grub problem, or does it have something to do with the fact

a grub problem

Quoted 2 lines

What is the relationship between the promise driver and the one included in the kernel? Why does one work differently from the other? Is there

Promise SX8 provides neither an ATA nor SCSI interface to the developer, so its not written as an ATA or SCSI driver.

Quoted 8 lines

Jeff

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/