by smtp.nexlab.net (Postfix) with ESMTP id C7748FA66 for <[email protected]>; Tue, 24 May 2005 06:39:39 +0200 (CEST)
Received: ([email protected]) by vger.kernel.org via listexpand
id S261189AbVEXDtE (ORCPT <rfc822;[email protected]>); Mon, 23 May 2005 23:49:04 -0400
Received: ([email protected]) by vger.kernel.org id S261221AbVEXDtE
(ORCPT <rfc822;linux-kernel-outgoing>); Mon, 23 May 2005 23:49:04 -0400
Received: from opersys.com ([64.40.108.71]:8967 "EHLO www.opersys.com")
by vger.kernel.org with ESMTP id S261189AbVEXDsk (ORCPT <rfc822;[email protected]>); Mon, 23 May 2005 23:48:40 -0400
Received: from [127.0.0.1] (www.opersys.com [64.40.108.71])
by www.opersys.com (8.9.3/8.9.3) with ESMTP id VAA32223; Mon, 23 May 2005 21:26:39 -0700
Message-ID: <[email protected]>
Date: Mon, 23 May 2005 23:59:24 -0400
From: Karim Yaghmour <[email protected]>
Reply-To: [email protected]
Organization: Opersys inc.
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.2) Gecko/20040805 Netscape/7.2
X-Accept-Language: en-us, en, fr, fr-be, fr-ca, fr-fr
MIME-Version: 1.0
To: Benjamin Herrenschmidt <[email protected]>
Cc: Jens Axboe <[email protected]>,
Linux Kernel list <[email protected]>
Subject: Re: ide-cd vs. DMA
References: <1116891772.30513.6.camel@gaston> <[email protected]> <1116905090.4992.7.camel@gaston>
In-Reply-To: <1116905090.4992.7.camel@gaston>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: [email protected]
Precedence: bulk
X-Mailing-List: [email protected]
Quoted 4 lines · Benjamin Herrenschmidt
Well, not sure what's wrong here, but ATAPI errors shouldn't normally result in stopping DMA. We may want to just blacklist your drive rather than having this stupid fallback. In this case, I suspect it's CSS/region issue with a DVD.
Here's a little bit more info:
Here's from dmesg:
hdc: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drive
hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33)
hdparm -i /dev/hdc:
/dev/hdc:
Model=SAMSUNG SC-140B, FwRev=d005, SerialNo=
Config={ SpinMotCtl Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no
Here's what happens on the first mount attempt:
hdc: DMA interrupt recovery
hdc: lost interrupt
hdc: status timeout: status=0xd0 { Busy }
hdc: status timeout: error=0x00
hdc: DMA disabled
hdc: drive not ready for command
hdc: ATAPI reset complete
Now, if I'm stuborn and re-enable DMA using a "hdparm -d1 /dev/hdc" and then try again, now I get:
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34
ide: failed opcode was 100end_request: I/O error, dev hdc, sector 16
The last error being repeated ad-nauseam for every "sector" on the disk. Again, note that this is a CD drive, not a hard disk.
Here's from lspci:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
In attempting to isolate the problem, I ran into a spurious issue with another drive I have in that machine:
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: DMA disabled
Try as I may, however, I haven't been able to reproduce this problem with hda (from dmesg: hda: WDC AC22500L, ATA DISK drive). It's worthy pointing out that the machine came with a drive on which it was found that there were actual bad sectors (tested on another machine.) ... the thought of a buggy controller came to mind, but (though this may be possible), I've never heard about a bad controller generating bad sectors ...
Karim
Signature · 8 lines
Author, Speaker, Developer, Consultant Pushing Embedded and Real-Time Linux Systems Beyond the Limits http://www.opersys.com || [email protected] || 1-866-677-4546 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/