Wanted Good Documentation on HFSC
Hello All,
I am trying to prioratize VOIP traffic from data.
The follwing link says that HFSC is better than HTB for shaping VOIP traffic.
http://www.voip-info.org/wiki-QoS+Linux+with+HFSC
I am in search of good documentation to start with HFSC,
I am unable to understand the parameters used.
I "googled" a lot to find on how to use HFSC, but no luck.
Can anyone of you get me a link To good HFSC stuff....
Regards
KartheeK
Yahoo! India Matrimony: Find your life partneronline.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 11 lines · KartheeK
Hello All,
I am trying to prioratize VOIP traffic from data.
The follwing link says that HFSC is better than HTB for shaping VOIP traffic.
http://www.voip-info.org/wiki-QoS+Linux+with+HFSC
I am in search of good documentation to start with HFSC, I am unable to understand the parameters used.
I "googled" a lot to find on how to use HFSC, but no luck. Can anyone of you get me a link To good HFSC stuff.... Regards
KartheeK
I have the same problem.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 12 lines · Konrad
Quoted 10 lines · KartheeK
Hello All,
I am trying to prioratize VOIP traffic from data. The follwing link says that HFSC is better than HTB for shaping VOIP traffic.
http://www.voip-info.org/wiki-QoS+Linux+with+HFSC
I am in search of good documentation to start with HFSC,
I am unable to understand the parameters used.
I "googled" a lot to find on how to use HFSC, but no luck. Can anyone of you get me a link To good HFSC stuff.... Regards
KartheeK
Quoted 1 line
I have the same problem.
HFSC is based upon ALTQ (used on FreeBSD)... so I found and used some documentation from a README file in the ALTQ package...
Maybe someone, which is actually using HFSC, should write a new section to the LARTC HOWTO... Anyone using HFSC on this mailinglist?
Hilsen
Jesper Brouer
--
-------------------------------------------------------------------
Research Assistant
Dept. of Computer Science, University of Copenhagen
E-mail: [email protected], Direct Tel.: 353 21438
-------------------------------------------------------------------
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi
I read this thread - it gives some basics on what the params mean
http://mailman.ds9a.nl/pipermail/lartc/2004q1/011908.html
This link presents some idea on how it works and what it's for
http://www.tik.ee.ethz.ch/~crossbow/rp/plugins/hfsc.html
hope this helps
Martin
Quoted 12 lines · KartheeK
Hello All,
I am trying to prioratize VOIP traffic from data.
The follwing link says that HFSC is better than HTB for shaping VOIP traffic. http://www.voip-info.org/wiki-QoS+Linux+with+HFSC
I am in search of good documentation to start with HFSC, I am unable to understand the parameters used.
I "googled" a lot to find on how to use HFSC, but no luck. Can anyone of you get me a link To good HFSC stuff.... Regards
KartheeK
Quoted 1 line
Yahoo! India Matrimony: Find your life partneronline.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 13 lines · Jesper Dangaard Brouer
Quoted 12 lines · Konrad
Quoted 10 lines · KartheeK
Hello All,
I am trying to prioratize VOIP traffic from data. The follwing link says that HFSC is better than HTB for shaping VOIP traffic.
http://www.voip-info.org/wiki-QoS+Linux+with+HFSC
I am in search of good documentation to start with HFSC,
I am unable to understand the parameters used.
I "googled" a lot to find on how to use HFSC, but no luck. Can anyone of you get me a link To good HFSC stuff.... Regards
KartheeK
Quoted 7 lines
Quoted 1 line
I have the same problem.
HFSC is based upon ALTQ (used on FreeBSD)... so I found and used some documentation from a README file in the ALTQ package...
Maybe someone, which is actually using HFSC, should write a new section to the LARTC HOWTO... Anyone using HFSC on this mailinglist?
I was using it for some time to provide RT for games in my network, but having encountered some strange behavior of hfsc I did almost the same using htb and its burst/cburst parameter. For now it works. When I have time I'll decribe it and try to investigate my hfsc problems.
Quoted 4 lines
Hilsen
Jesper Brouer
Quoted 10 lines
--
-------------------------------------------------------------------
Research Assistant
Dept. of Computer Science, University of Copenhagen
E-mail: [email protected], Direct Tel.: 353 21438
-------------------------------------------------------------------
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc