Skip to contentSkip to conversation

Problems on Philips ISP1362 Driver

DISCUSSION Jianliang Lu 1 participant 1 message Jun 17, 2005

lore
Share & tools
lore
#0 lore raw

Hi all,
We are using ISP1362 usb host controller in our PPC-linux embedded system and we have had following problems:

1) ATL Interrupt doesn't work correctly. We have to use ATL_THRESHOLD_TIMEOUT, that has the minimun resolution 1 msec, to bypass it.

2) The latency from PTD completion. From a usb frame analyzer we have seen that the controller has gaps between every 4 64-bytes frames for 265 bytes PTD configured in bulk transmission. The limit of 265 byte for PTD is due to the end-point number.

3) The isochronous mode doesn' t work. That we've seen was we were loop on frame number, so the machine went to hang!

The driver is ported from those of philips (last updated was 2002), I don't know if there is any updated driver. I've seen on the list that Wolfgang Denk has test it on many devices and works fine. I'd like to know from Wolfgang which driver did you use? Is the driver is open source?

Thanks in advance!
Jianliang Lu